Microwave absorption performance of in situ synthesized Fe3O4-SiO2 hybrid fibres with enhanced environmental stability
Source abstract
Abstract
Abstract Fe3O4-SiO2 hybrid fibres were prepared by a combination of sol-gel and electro spinning techniques. The X-ray diffraction peaks of the fibres at 30.5, 35.5, 43.0, 57.0 and 62.6 correspond to the (220), (311), (400), (511) and (440) Fe3O4 planes and confirm the formation of Fe3O4 in the amorphous silica matrix. Si and Fe elemental mappings at the microstructural level were determined by scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS). The results reveal the uniform distribution of Si and Fe in the hybrid fibres. The Fe3O4-SiO2 hybrid fibres are immersed in the test hydrochloric acid solution with pH=1 and still can be magnetized and attracted to an external magnet after 6 h in the solution. The heat- and flame-resistant performances of the hybrid fibres are demonstrated. Moreover, the prepared Fe3O4-SiO2 hybrid fibres display good microwave absorption performance in the range of relatively high frequencies. At a thickness of 5 mm, the bandwidth corresponding to reflection loss below −10 dB reaches approximately 11 GHz (7–18 GHz), covering the entire X-band (8.0–18.0 GHz) and Ku-band (12.0–18.0 GHz).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Magnetic, dielectric, and microwave absorbing properties of iron particles dispersed in rubber matrix in gigahertz frequencies10.1063/1.1852371 ↗
2. High-temperature annealing of an iron microplate with excellent microwave absorption performance and its direct micromagnetic analysis by electron holography and lorentz microscopy10.1039/C7TC01544E ↗
3. Pb substituted Ba, Sr-hexaferrite nanoparticles as high quality microwave absorbers10.1016/j.ceramint.2017.07.134 ↗
4. Graphene nanosheet- and flake carbonyl iron particle-filled epoxy-silicone composites as thin-thickness and wide-bandwidth microwave absorber10.1016/j.carbon.2015.01.002 ↗
5. Microwave-absorbing ferrite-dielectric composites10.1111/j.1151-2916.1976.tb09512.x ↗
6. Effects of diameter and hollow structure on the microwave absorption properties of short carbon fibers10.1016/j.ceramint.2012.02.077 ↗
7. Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers10.1016/j.cej.2010.05.025 ↗
8. High frequency absorption of PVC/iron oxides and PVC/CoFe2O4/CoO nanofibers produced by electrospinning technique10.1109/TMAG.2011.2158109 ↗
9. Efficient ferrite/Co/porous carbon microwave absorbing material based on ferrite@metal-organic framework10.1016/j.cej.2017.06.006 ↗
10. Excellent microwave-absorbing properties of elliptical Fe3O4 nanorings made by a rapid microwave-assisted hydrothermal approach10.1088/0957-4484/27/16/165707 ↗
11. Synthesis and microwave absorption enhancement of graphene@Fe3O4@SiO2@NiO nanosheet hierarchical structures10.1039/C3NR05313J ↗
12. Preparation and microwave absorption properties of loose nanoscale Fe3O4 spheres10.1016/j.jmmm.2010.02.003 ↗
13. Double-shelled yolk-shell microspheres with Fe3O4 cores and SnO2 double shells as high-performance microwave absorbers10.1021/jp310898z ↗
14. Boron and nitrogen doped carbon nanotubes/Fe3O4 composite architectures with microwave absorption property10.1016/j.ceramint.2015.03.031 ↗
15. Microwave absorption enhancement of multifunctional composite microspheres with spinel Fe3O4 cores and anatase TiO2 shells
16. Enhanced microwave absorption property of bowl-like Fe3O4 hollow spheres/reduced graphene oxide composites10.1063/1.3691527 ↗
17. Uniform nickel deposition into ordered alumina pores by pulsed electrodeposition10.1002/(SICI)1521-4095(200004)12:8<582::AID-ADMA582>3.0.CO;2-3 ↗
18. Ultrasmall functional ferromagnetic nanostructures grown by focused electron-beam-induced deposition10.1021/nn201517r ↗
19. CoNi bimetallic nanofibers by electrospinning: nickel-based soft magnetic material with improved magnetic properties10.1021/jp1041074 ↗
20. Hybrid carbon silica nanofibers through sol-gel electrospinning10.1021/la503290n ↗
21. 1D magnetic materials of Fe3O4 and Fe with high performance of microwave absorption fabricated by electrospinning method10.1038/srep07493 ↗
22. Electrospun Fe2O3 nanotubes and Fe3O4 nanofibers by citric acid sol-gel method10.1111/jace.15164 ↗
23. The cobalt zinc spinel ferrite nanofiber: lightweight and efficient microwave absorber10.1111/jace.12909 ↗
24. Synthesis and microwave absorption properties of Fe-C nanofibers by electrospinning with disperse Fe nanoparticles parceled by carbon10.1016/j.carbon.2014.03.037 ↗
25. Exploration of the novel stacked structure and one-step fabrication of electrospun silica microbelts with controllable wettability10.1039/c3ra42356e ↗
26. Shell thickness-dependent microwave absorption of core-shell Fe3O4@C composites10.1021/am502910d ↗
27. Exchange resonance modes in a ferromagnetic sphere10.1063/1.347502 ↗
28. Effect of metal grain size on multiple microwave resonances of Fe/TiO2, metal-semiconductor composite10.1063/1.3496393 ↗
29. Spin wave mode transition induced by surface anisotropy and characteristic length in magnetic nanoparticles10.1063/1.3360882 ↗
30. Preparation of Fe2Ni2N/SiO2 nanocomposite via a two-step route and investigation of its electromagnetic properties10.1063/1.4773991 ↗
31. Enhanced microwave absorption of Fe nanoflakes after coating with SiO2 nanoshell10.1088/0957-4484/21/9/095708 ↗
32. Flexible nanocomposites with enhanced microwave absorption properties based on Fe3O4/SiO2 nanorods and polyvinylidene fluoride10.1039/C5TA01924A ↗
33. Reduction synthesis of FexOy@SiO2 core-shell nanostructure with enhanced microwave-absorption properties10.1016/j.jallcom.2014.03.002 ↗