journal article·2021-04

Investigation of perovskite BaCe1-xMnxO3-δ for methane combustion

Xihan Tan, Ning Han, Huibing Chen, Lin Su, Chi Zhang, Ying Li

Ceramics International· Volume 47· Issue 7
Publisher page

Abstract

Abstract The Mn-doped BaCeO3 series composite oxide catalysts were prepared by a sol-gel method. The low-temperature catalytic methane combustion activity test of BaCe1-xMnxO3-δ series composite oxide catalysts at low temperature (200-600 °C) was studied in a fixed bed reactor. The physical properties of the catalyst were characterized by XRD, SEM, particle size analysis and specific surface area measurement, and the conductivity of the sample was measured by AC impedance spectroscopy. Research shows that: the perovskite phase composite oxide catalyst was successfully prepared by the sol-gel method, and the prepared perovskite phase catalyst has good catalytic performance and high temperature stability. The catalytic performance of the catalyst changes with the conductivity, which shows a proportional relationship; when the temperature is lower than 650 °C, Mn doping significantly improves the catalytic activity of the BaCeO3 catalyst for methane combustion. The catalytic activity increases initially and then decreases with the doping amount of Mn. When the doping amount is 0.4 the catalyst has the best catalytic activity, with the ignition temperature of methane at as low as 249.7 °C, and the catalytic methane complete conversion temperature T90 (The corresponding temperature when CH4 conversion rate is 90%) at 423.2 °C. This work is of considerable referential importance in the optimization design of catalysts for CH4 combustion at low temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Novel Pd/SnxZr1−xO2 catalysts for methane total oxidation at low temperature and their18 O-isotope exchange behavior10.1016/j.apcatb.2004.08.006 ↗
2. Effect of ceria on palladium supported catalysts for high temperature combustion of CH4 under lean conditions10.1016/S0920-5861(98)00518-5 ↗
3. Catalytic combustion over platinum group catalysts: fuel-lean versus operation10.1016/S0920-5861(03)00217-7 ↗
4. Enhancement of oxygen permeation fluxes of La0.6Sr0.4CoO3-δ hollow fiber membrane via macrostructure modification and (La0.5Sr0.5)2CoO4+δ decoration10.1016/j.cherd.2018.04.038 ↗
5. Enhancing O2-permeability and CO2-tolerance of La2NiO4+δ membrane via internal ionic-path10.1016/j.matlet.2018.07.104 ↗
6. Synthesis of highly efficient and stable Ni/CexZr1-xGdxO4 and Ni/X-Al2O3 (X = Ce, Zr, Gd, Ce-Zr-Gd) nanocatalysts applied in methane reforming reactions10.1016/j.ceramint.2020.06.299 ↗
7. Efficient removal of organic pollutants by ceramic hollow fibre supported composite catalyst10.1016/j.susmat.2019.e00108 ↗
8. Performance control of dead-end tubular membranes fabricated with a modified phase inversion casting method10.1016/j.ceramint.2020.05.325 ↗
9. One-step thermal processing to prepare BaCo0.95-xBi0.05ZrxO3-δ membranes for oxygen separation10.1016/j.ceramint.2019.03.087 ↗
10. Highly stable dual-phase membrane based on Ce0.9Gd0.1O2-δ -La2NiO4+δ for oxygen permeation under pure CO2 atmosphere10.1002/ente.201800701 ↗
11. High oxygen permeation through A-site deficient K2NiF4+δ-type oxide hollow-fiber membrane10.1016/j.ceramint.2018.03.134 ↗
12. CO2-tolerant Ni-La5.5WO11.25-δ dual-phase membranes with enhanced H2 permeability10.1016/j.ceramint.2017.07.098 ↗
13. Boosting the oxygen evolution electrocatalysis of layered nickel hydroxidenitrate nanosheets by iron doping10.1016/j.ijhydene.2019.03.010 ↗
14. Recent advances in nanostructured metal nitrides for water splitting10.1039/C8TA06529B ↗
15. A novel lanthanum strontium cobalt iron composite membrane synthesised through beneficial phase reaction for oxygen separation10.1016/j.ceramint.2019.06.128 ↗
16. Evaluation of hydrogen separation performance of Ni-BaCe0.85Fe0.15O3-δ cermet membranes10.1016/j.ceramint.2019.02.059 ↗
17. Perovskite oxide based composite hollow fiber membrane for CO2 transport10.1016/j.ceramint.2019.09.059 ↗
18. The effect of microstructure and surface decoration with K2NiF4-type oxide upon the oxygen permeability of perovskite-type La0.7Sr0.3FeO3-δ hollow fiber membranes10.1039/C5RA14230J ↗
19. Li ion conduction of perovskite Li0.375Sr0.4375Ti0.25Ta0.75O3 and related compounds10.1016/j.ceramint.2017.11.186 ↗
20. Structure, stability, and ionic conductivity of perovskite Li2x-ySr1-x-yLayTiO3 solid electrolytes10.1016/j.ceramint.2019.11.277 ↗
21. Superior three‐dimensional perovskite catalyst for catalytic oxidation
22. Fluorine-doped barium cobaltite perovskite membrane for oxygen separation and syngas production10.1016/j.ceramint.2020.07.235 ↗
23. Structural and electrical properties of cerium tungstate: application to methane conversion10.1016/j.ceramint.2019.12.026 ↗
24. Density functional theory calculations of atomic, electronic and thermodynamic properties of cubic LaCoO3 and La1-xSrxCoO3 surfaces10.1039/C4RA12563K ↗
25. Pd doped LaSrCuO4 perovskite nano-catalysts synthesized by a novel solid-state method for CO oxidation and Methane combustion10.1016/j.ceramint.2018.08.211 ↗
26. Effect of enhanced oxygen reduction activity on oxygen permeation of La0.6Sr0.4Co0.2Fe0.8O3-δ membrane decorated by K2NiF4-type oxide10.1016/j.jallcom.2015.09.086 ↗
27. New morphological Ba0.5Sr0.5Co0.8Fe0.2O3−α hollow fibre membranes with high oxygen permeation fluxes10.1016/j.ceramint.2012.06.044 ↗
28. Total oxidation of toluene over metal oxides supported on a natural clinoptilolite-type zeolite10.1016/j.cej.2010.05.020 ↗
29. CO and CH4 total oxidation over manganese oxide supported on ZrO2, TiO2, TiO2-Al2O3 and SiO2-Al2O3 catalysts10.1039/a907468f ↗
30. Characterization and performance in a multicycle test in a fixed-bed reactor of silica-supported copper oxide as oxygen carrier for chemical-looping combustion of methan
31. Metal oxides nanoparticles on SBA-15: efficient catalyst for methane combustion10.1016/j.cattod.2008.04.027 ↗
32. Nanocasted synthesis of mesoporous metal oxides and mixed oxides from mesoporous cubic (Ia3d) vinylsilica10.1166/jnn.2008.226 ↗
33. Synthesis and characterization of LaCr1−xNixO3Perovskite oxide catalysts10.1006/jcat.1997.1509 ↗
34. Kinetics of methane combustion over CVD-made cobalt oxide catalysts10.1016/j.apcatb.2006.03.024 ↗
35. Catalytic oxidation of methane over CeO2-ZrO2 mixed oxide solid solution catalysts prepared via urea hydrolysis10.1016/S0926-860X(02)00230-2 ↗
36. Total oxidation of carbon monoxide and methane over transition metal-fluorite oxide composite catalysts: I. Catalyst composition and activity10.1006/jcat.1995.1132 ↗
37. Nickel-based catalyst derived from NiO-Ce0.75Zr0.25O2 nanocrystalline composite: effect of the synthetic route on the partial oxidation of methane10.1016/j.ceramint.2016.07.119 ↗
38. Development of a kinetic model for the oxidation of methane over Pd/Al2O3 at dry and wet conditions10.1016/j.apcatb.2004.03.006 ↗
39. SSITKA studies of the catalytic flameless combustion of methane10.1016/j.cattod.2007.11.027 ↗
40. The effect of CeO2 on the dynamics of Pd-PdO transformation over Pd/Al2O3 combustion catalysts10.1016/j.catcom.2006.11.020 ↗
41. Total oxidation of methane at low temperature over Pd/TiO2/Al2O3: effects of the support and residual chlorine ions10.1016/j.apcatb.2004.03.009 ↗
42. Synthesis and characterization of mesoporous NiO2/ZrO2-CeO2 catalysts for total methane conversion10.1016/j.ceramint.2017.03.101 ↗
43. Structural and magnetic features of La0.7Sr0.3Mn1−xCoxO3 nano-catalysts for ethane combustion and CO oxidation10.1016/j.ceramint.2015.12.101 ↗
44. An ultra-stable nanosized Ce0.9Fe0.1O2 solid solution with an excellent catalytic performance towards CH4 oxidation10.1039/C2TA00167E ↗
45. Methane oxidation over A-site ordered and disordered Sr0.8Gd0.2CoO3-δ perovskites10.1039/c4cc00913d ↗
46. Encapsulated Co3O4/(SiAl@AlO3) thermal storage functional catalysts for catalytic combustion of lean methane
47. A facile method to promote LaMnO3 combustion of methane10.1016/j.catcom.2017.04.022 ↗
48. Catalytic behaviour of stoichiometric and nonstoi- chiometric LaMnO3 perovskite towards methane combustion10.1016/S0254-0584(02)00218-3 ↗
49. Perovskite-type SrFe1-xMnxO3 catalysts: preparation by Co-precipitation Method and catalytic performance for methane combustion
50. Effects of preparation methods on the catalytic performance of LaMn0.8Mg0.2O3 perovskite for methane combustion10.1016/S1872-2067(10)60101-5 ↗
51. Influence of preparation methods of La2CoMnO6/CeO2 on the methane catalytic combustion10.1016/j.fuel.2016.03.041 ↗