Study on sintering behaviour of ytterbium disilicate and ytterbium monosilicate for environmental barrier coating applications
Source abstract
Abstract
Yb2Si2O7 (YbDS) and Yb2SiO5 (YbMS) are two promising materials being developed as environmental barrier coatings (EBC) for the protection of Ceramic Matrix Composites (CMC) applied to gas-turbine engines operating in high-temperature corrosive environments. In this work, sintering behaviour of YbDS, YbMS, and YbDS/YbMS composites compacts were investigated. The effect of the thermal ageing at 1350 °C on microstructural characteristics as well as crack healing and elastic properties were examined. It was found that YbDS had a lower critical sintering temperature and higher grain growth rate than that of YbMS due to lower activation energy. The sintering behaviour of the YbDS/YbMS composites showed that the addition of YbMS retarded the grain growth rates and contributed to the stabilisation of the elastic properties. In addition to this, composite containing 22 wt %YbMS displayed a crack healing behaviour during high-temperature exposure which was attributed to the generation of compressive stress consequently accelerated diffusion in YbDS matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Potential application of ceramic matrix composites to aero-engine components10.1016/S1359-835X(98)00139-0 ↗
2. High-temperature stability of SiC-based composites in high-water-vapor-pressure environments10.1111/j.1151-2916.2003.tb03463.x ↗
3. Oxidation and volatilization of silica formers in water vapor10.1111/j.1151-2916.2003.tb03459.x ↗
4. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
5. Current status of environmental barrier coatings for Si-based ceramics
6. Upper temperature limit of environmental barrier coatings based on mullite and BSAS10.1111/j.1151-2916.2003.tb03466.x ↗
7. Advanced environmental barrier coatings for SiC/SiC ceramic matrix composite turbine components10.1002/9781119100430.ch10 ↗
8. Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4ceramics10.1016/j.jeurceramsoc.2004.12.013 ↗
9. Water vapour corrosion of rare earth monosilicates for environmental barrier coating application10.1016/j.ceramint.2017.02.123 ↗
10. High-temperature solid solutions of silicates of the rare earth elements
11. Damage tolerance and extensive plastic deformation of β-Yb 2 Si 2 O 7 from room to high temperatures10.1111/jace.13702 ↗
12. Phase and microstructure evolution in plasma sprayed Yb2Si2O7 coatings10.1016/j.jeurceramsoc.2018.11.018 ↗
13. Molten silicate reactions with plasma sprayed ytterbium silicate coatings10.1016/j.surfcoat.2015.12.053 ↗
14. CMAS degradation of environmental barrier coatings10.1016/j.surfcoat.2007.06.045 ↗
15. Thermochemical interaction of thermal barrier coatings with molten CaO-MgO-Al 2 O 3-SiO 2 (CMAS) deposits10.1111/j.1551-2916.2006.01209.x ↗
16. Plasma spray deposition of tri-layer environmental barrier coatings10.1016/j.jeurceramsoc.2014.04.027 ↗
17. Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings10.1007/s10853-015-9358-5 ↗
18. Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor10.1016/j.actamat.2015.12.053 ↗
19. Characterization of Yb2Si2O7–Yb2SiO5 composite environmental barrier coatings resultant from in situ plasma spray processing10.1016/j.ceramint.2020.05.228 ↗
20. Thermal shock resistance of tri-layer Yb 2 SiO 5/Yb 2 Si 2 O 7/Si coating for SiC and SiC-matrix composites10.1111/jace.15713 ↗
21. Degradation of ytterbium disilicate environmental barrier coatings in high temperature steam atmosphere10.1016/j.jeurceramsoc.2019.04.034 ↗
22. Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure10.1016/j.actamat.2015.10.019 ↗
23. Property evolutions of Si/mixed Yb2Si2O7 and Yb2SiO5 environmental barrier coatings completely wrapping up SiCf/SiC composites under 1300 °C water vapor corrosion10.1016/j.ceramint.2021.04.246 ↗
24. The interaction of calcium–magnesium–aluminosilicate with ytterbium silicate environmental barrier materials10.1016/j.surfcoat.2015.08.069 ↗
25. Webster · 2020
26. Mechanical properties of air plasma sprayed environmental barrier coating (EBC) systems: preliminary assessments
27. Comparative study on high-temperature performance and thermal shock behavior of plasma-sprayed Yb2SiO5and Yb2Si2O7coatings10.1016/j.surfcoat.2018.06.056 ↗
28. ASTM Standard E112-13 · 2013
29. Densification behaviour and sintering kinetics of ThO2-4%UO 2 pellet10.1016/j.jnucmat.2010.11.029 ↗
30. Intermediate and final stage sintering10.1016/B978-075066385-4/50005-4 ↗
31. Mechanical and thermal properties of Yb2SiO5: a promising material for T/EBCs applications10.1111/jace.14085 ↗
32. Mechanical and thermal properties of Yb2SiO5: first-principles calculations and chemical bond theory investigations10.1557/jmr.2014.201 ↗
33. Theoretical prediction and experimental investigation on the thermal and mechanical properties of bulk β-Yb 2 Si 2 O 710.1111/jace.12618 ↗
34. Effect of yttrium and lanthanum on the final-stage sintering behavior of ultrahigh-purity alumina10.1111/j.1151-2916.1997.tb03084.x ↗
35. Microstructure evolution and thermomechanical properties of plasma-sprayed Yb 2 SiO 5 coating during thermal aging10.1111/jace.14690 ↗
36. Effect of second-phase particle morphology on grain growth kinetics10.1016/j.actamat.2009.07.025 ↗
37. Pinning effect of second-phase particles on grain growth in polycrystalline films studied by 3-D phase field simulations10.1016/j.actamat.2006.11.018 ↗
38. Structure stabilization by zirconia pinning effect of Y2Si2O7 environmental barrier coatings synthesized by solution precursor plasma spraying process10.1016/j.surfcoat.2016.10.015 ↗
39. Zener pinning and grain growth: a two-dimensional vertex computer simulation10.1016/S1359-6454(98)00383-8 ↗
40. Effect of sintering temperature and TiB2 content on the grain size of B4C-TiB2 composites
41. Mechanical properties and microstructural evolution of alumina-zirconia nanocomposites by microwave sintering10.1016/j.ceramint.2014.03.153 ↗
42. On the effective young’s modulus of elasticity for porous materials: microstructure modelling and comparison between calculated and experimental values10.1515/JMBM.1993.4.2.119 ↗
43. Thermal shock behavior of mixed ytterbium disilicates and ytterbium monosilicates composite environmental barrier coatings10.1016/j.surfcoat.2018.08.041 ↗
44. Mechanical properties and microstructure of Yb2SiO5 environmental barrier coatings under isothermal heat treatment10.1016/j.jeurceramsoc.2019.12.057 ↗
45. Sintering with external pressure, sinter. From
46. Path and kinetics of microstructural change in simple sintering10.1533/9781845699949.1.65 ↗
47. Analysis of the sintering pressure10.1111/j.1151-2916.1987.tb05743.x ↗
48. Relation between coarsening and densification in solid-state sintering of ceramics: experimental test on superfine zirconia powder compacts10.1557/JMR.1999.0189 ↗
49. Residual stresses and constrained sintering of YSZ/Al2O3composite coatings10.1016/j.actamat.2004.02.007 ↗
50. Electrical and hydrogen reduction enhances kinetics in doped zirconia and ceria: I. grain growth study10.1111/jace.14615 ↗
51. Constrained sintering of YSZ/Al2O3composite coatings on metal substrates produced from eletrophoretic deposition10.1016/j.jeurceramsoc.2006.09.016 ↗
52. Thermal-expansion behavior of two-phase solids10.1063/1.1658619 ↗
53. Behavior of large pores during sintering and hot isostatic pressing10.1111/j.1151-2916.1986.tb07442.x ↗
54. Critical evaluation of hot forging experiments: case study in alumina10.1111/j.1151-2916.2003.tb03431.x ↗