Micro-structure response and fracture mechanisms of C/SiC composites subjected to low-velocity ballistic penetration
Source abstract
Abstract
Abstract Dynamic response and fracture mechanisms of Carbon Fiber Reinforced Silicon Carbide Composites (C/SiC) especially during low-velocity ballistic penetration are studied both experimentally and numerically. The gas-gun facility is used to fire spherical metallic projectile for striking velocity of 150 m s −1 on the target panels, and the impact phenomenon is captured through high-speed photography. A micro-structure based approach is employed to model C/SiC target in this paper. This proposed numerical technique captured the mechanical response (residual energy, expansion process and velocity of debris cloud, fracture morphology and mode) of target, with adequate accuracy. The fracture modes involve void collapse, delamination, fiber bundle splitting and breakage. The debris cloud possesses two types of constituents, classified by fragments' volume and high-energy powdering column at the front. The experimental and calculated results emphasize that the impact velocity, projectile shape and hardness have significant influence on the mechanical behavior of C/SiC composites, including fragment size, fracture surface morphology, fracture mode and mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. The effect of hole defects on the oxidation behaviour of two-dimensional C/SiC composites10.1016/j.ceramint.2016.06.200 ↗
2. Three-dimensional carbon/silicon carbide composites prepared by chemical vapor infiltration10.1111/j.1151-2916.1997.tb03069.x ↗
3. Fabrication and oxidation resistant behavior of plasma sprayed Si/Yb2Si2O7/LaMgAl11O19 coating for Cf/SiC composites at 1673K10.1016/j.ceramint.2016.09.171 ↗
4. From columbia to discovery: understanding the impact threat to the space shuttle10.1016/j.ijimpeng.2007.12.013 ↗
5. Residual mechanical properties of a carbon fibers/PEEK space robotic arm after simulated orbital debris impact10.1016/j.ijimpeng.2015.05.010 ↗
6. Dynamic fracture of C/SiC composites under high strain-rate loading: microstructures and mechanisms10.1016/j.carbon.2015.05.015 ↗
7. Damage evolution and distribution of interpenetrating phase composites under dynamic loading10.1016/j.ceramint.2014.05.031 ↗
8. The compressive and tensile behavior of a 0/90 C fiber woven composite at high strain rates10.1016/j.carbon.2013.04.073 ↗
9. The dynamic tensile properties of 2D-C/SiC composites at elevated temperatures10.1016/j.ijimpeng.2014.10.006 ↗
10. Rigid and eroding projectile penetration into concrete targets based on an extended dynamic cavity expansion model10.1016/j.ijimpeng.2016.10.005 ↗
11. Experimental study on penetration behavior of reactive material projectile impacting aluminum plate10.1016/j.ijimpeng.2016.05.007 ↗
12. Investigation on dynamic penetration of closed-cell aluminium foam using in situ deceleration measurement10.1016/j.compositesb.2016.06.040 ↗
13. Mechanical behavior of C/SiC composites under hypervelocity impact at different temperatures: micro-structures, damage and mechanisms10.1016/j.compositesa.2016.05.015 ↗
14. Impact resistance of 2D plain-woven C/SiC composites at high temperature10.1016/j.matdes.2015.11.024 ↗
15. Experimental study on the impact resistance of 2D plain-woven C/SiC composite10.1016/j.ceramint.2014.07.031 ↗
16. Finite element modeling of impact, damage evolution and penetration of thick-section composites10.1016/j.ijimpeng.2010.11.001 ↗
17. Ballistic impact behavior of woven ceramic fabric reinforced metal matrix composites10.1016/j.ijimpeng.2015.07.005 ↗
18. Mechanisms of penetration in polyethylene reinforced cross-ply laminates10.1016/j.ijimpeng.2015.08.012 ↗
19. Experimental and numerical investigation on SiC coating delamination from C/SiC composites10.1016/j.compscitech.2015.02.012 ↗
20. Predictions of elastic property on 2.5D C/SiC composites based on numerical modeling and semi-analytical method10.1016/j.compositesb.2015.01.009 ↗
21. Experimental and numerical evaluation of bending and tensile behaviour of carbon-fibre reinforced SiC10.1016/j.compositesa.2012.07.017 ↗
22. Numerical modeling of oxidized C/SiC microcomposite in air oxidizing environments below 800°C: microstructure and mechanical behavior10.1016/j.jeurceramsoc.2015.05.039 ↗
23. Slip zone model for interfacial failures of stiff film/soft substrate composite system in flexible electronics10.1016/j.mechmat.2014.08.007 ↗
24. Effect of loading rate and temperature on monotonic tensile behavior in two-dimensional C/SiC composites10.1016/j.ceramint.2014.08.024 ↗
25. Microstructure and frictional properties of C/SiC brake materials with sandwich structure10.1016/j.ceramint.2011.04.075 ↗
26. Tensile fatigue behavior of plain-weave reinforced Cf/C-SiC composites10.1016/j.ceramint.2016.01.068 ↗
27. In-plane crushing of a hierarchical honeycomb10.1016/j.ijsolstr.2016.02.003 ↗
28. Influence of cell wall shape and density on the mechanical behaviour of 2D foam structures10.1016/j.actamat.2004.11.025 ↗
29. The effect of cell irregularity on the high strain compression of 2D voronoi honeycombs10.1016/j.ijsolstr.2005.05.008 ↗
30. Macro/micro structure dependence of mechanical strength of low temperature sintered silicon carbide ceramic foams10.1016/j.ceramint.2012.03.030 ↗
31. Effect of heat treatment on the thermal expansion of 2D and 3D C/SiC composites from room temperature to 1400°C10.1016/S0008-6223(03)00125-8 ↗
32. Thermal residual stresses in ceramic matrix composites-I. axisymmetrical model and finite element analysis10.1016/0956-7151(94)00429-3 ↗
33. Bird strike on a flat plate: experiments and numerical simulations10.1016/j.ijimpeng.2014.03.006 ↗
34. The low-velocity-to-hypervelocity penetration transition for impact craters in metal targets10.1016/S0921-5093(98)00796-5 ↗
35. Impact perforation of sandwich panels with aluminum foam core: a numerical and analytical study10.1016/j.ijimpeng.2016.05.013 ↗
36. Experimental observations and computer simulations for metallic projectile fragmentation and impact crater development in thick metal targets10.1016/j.ijimpeng.2005.06.004 ↗
37. Effects of alloy type and heat treatment on ejecta and crater sizes in aluminum alloys subjected to hypervelocity impacts10.1016/j.ijimpeng.2012.11.004 ↗
38. An experimental study of penetration resistance of ceramic armour subjected to projectile impact10.1016/j.ijimpeng.2005.03.004 ↗
39. Numerical simulations of ceramic target subjected to ballistic impact using combined DEM/FEM approach10.1016/j.ijmecsci.2016.04.019 ↗
40. Experimental study on expansion characteristics of debris clouds produced by oblique hypervelocity impact of LY12 aluminum projectiles with thin LY12 aluminum plates10.1016/j.ijimpeng.2008.07.026 ↗
41. Impact damage and residual strength predictions of 2D woven SiC/SiC composites10.1016/j.finel.2016.01.001 ↗
42. Fracture behavior of silicon nitride ceramics subjected to hypervelocity impact10.1016/j.ijimpeng.2011.01.003 ↗