journal article·2018-10

Fabrication and characterization of robust hydrophobic lotus leaf-like surface on Si3N4 porous membrane via polymer-derived SiNCO inorganic nanoparticle modification

Yan-Dong Xu, Zhen-Yu Zhu, Tian-Zhao Xu, Hamidreza Abadikhah, Jun-Wei Wang, Xin Xu, Simeon Agathopoulos

Ceramics International· Volume 44· Issue 14
Publisher page

Abstract

Abstract Robust hydrophobic surface was produced by modifying the surface of porous Si 3 N 4 membrane, via aminolysis and pyrolysis process, with organosilane-derived inorganic SiNCO nanoparticles, which are tightly adhered to the Si 3 N 4 grains. The resultant material had a high water contact angle of 142°, attributed to -Si-CH 3 surface terminal groups and a lotus leaf-like hierarchical structure of the nanoparticles, which had a frame structure with Si-N and Si-O covalent bonds in their bulk. The hydrophobic behavior remained practically unchanged after exposure of the produced membranes to aqueous solutions of humic acid, HCl and NaOH, to benzene, as well as to stirring abrasive slurry with SiC particles, and after exposure at high temperatures, up to 500 °C, to air. The inorganic membrane can be considered for use in a broad range of applications which require robust hydrophobic surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Membrane Separation Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Copper based hydrophobic ceramic nanocoating10.1016/j.jeurceramsoc.2011.08.013 ↗
2. How to functionalize ceramics by Perfluoroalkylsilanes for membrane separation process? Properties and application of hydrophobized ceramic membranes10.1021/acsami.6b00140 ↗
3. An effective method to significantly enhance the robustness and adhesion-to-substrate of high transmittance superamphiphobic silica thin films10.1039/C4TA03533J ↗
4. Highly hydrophobic ceramic membranes applied to the removal of volatile organic compounds in pervaporation
5. Enhanced water desalination performance through hierarchically-structured ceramic membranes10.1016/j.jeurceramsoc.2017.02.001 ↗
6. Preparation of alumina membranes comprising a thin separation layer and a support with straight open pores for water desalination10.1016/j.ceramint.2016.04.183 ↗
7. A review of pressure‐driven membrane processes in wastewater treatment and drinking water production10.1002/ep.670220116 ↗
8. Evaluation of the cleaning of a new hydrophobic membrane for osmotic evaporation10.1016/j.seppur.2006.11.016 ↗
9. Preparation and characterization of silicon nitride hollow fiber membranes for seawater desalination10.1016/j.memsci.2013.08.042 ↗
10. Hydrophobic porous alumina hollow fiber for water desalination via membrane distillation process10.1016/j.memsci.2012.02.011 ↗
11. FAS grafted superhydrophobic ceramic membrane10.1016/j.apsusc.2009.06.112 ↗
12. Surface modification of nanostructured ceramic membranes for direct contact membrane distillation10.1016/j.memsci.2008.11.038 ↗
13. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics10.1111/j.1551-2916.2010.03876.x ↗
14. Silicon-containing polymer-derived ceramic nanocomposites (PDC-NCs): preparative approaches and properties10.1039/c2cs15319j ↗
15. Nanostructure and micromechanical properties of silica silicon oxycarbide porous composites10.1111/j.1151-2916.2004.tb06365.x ↗
16. Fabrication of SiOC ceramic microparts and patterned structures from polysiloxanes via liquid cast and pyrolysis10.1111/j.1551-2916.2008.02849.x ↗
17. Surface modification of aluminum nitride by polysilazane and its polymer-derived amorphous silicon oxycarbide ceramic for the enhancement of thermal conductivity in silicone rubber composite10.1016/j.apsusc.2013.12.081 ↗
18. Studies on solution-derived ceramic coatings For oxidation protection of carbon-carbon composites10.1016/0008-6223(94)00168-Y ↗
19. The role of carbon in unexpected visco(an)elastic behavior of amorphous silicon oxycarbide above 1273 K10.1016/j.jnoncrysol.2005.06.008 ↗
20. Fiber-reinforced ceramic-matrix composites with a polysiloxane boron-derived matrix10.1111/j.1151-2916.1997.tb03058.x ↗
21. Interfacial adhesion between polymer separation layer and ceramic support for composite membrane10.1002/aic.12086 ↗
22. Macroporous silicon oxycarbide fibers with luffa-like superhydrophobic shells10.1021/ja902757a ↗
23. Ceramic membrane characterization via the bubble point technique10.1016/S0376-7388(96)00203-7 ↗
24. Steam electrolysis in a solid oxide electrolysis cell fabricated by the phase-inversion tape casting method10.1016/j.elecom.2015.10.015 ↗
25. Mass transfer mechanisms and transport resistances in direct contact membrane distillation process10.1016/j.memsci.2005.10.028 ↗
26. Bioinspired surfaces with special wettability10.1021/ar040224c ↗
27. Effects of surface structure on the hydrophobicity and sliding behavior of water droplets10.1021/la020088p ↗
28. P. Colombo, Polymer derived ceramics: from nanostructure to application, 2010.
29. Phase separation of a hafnium alkoxide-modified polysilazane upon polymer-to-ceramic transformation-a case study10.1016/j.jeurceramsoc.2011.09.003 ↗
30. Quantitative study on structural evolutions and associated energetics in polysilazane-derived amorphous silicon carbonitride ceramics10.1016/j.actamat.2014.03.049 ↗
31. Preparation and characterization of hydrophobic alumina planar membranes for water desalination10.1016/j.jeurceramsoc.2014.07.012 ↗