journal article·2021-12

Effect of nickel oxide and titanium oxide on the microstructural, optical, and mechanical properties of calcium hexaaluminate ceramics

Shichuang Cui, Qingchun Wang, Yang Zhou, Dawei Mao, Jinxiao Bao, Xiwen Song

Ceramics International· Volume 47· Issue 24
Publisher page

Abstract

Abstract The high porosity and poor mechanical properties limit the application of calcium hexaaluminate (CA6) ceramics in the field of colored ceramics. In order to synthesize a new blue ceramic material, Ni2+ and Ti4+ were introduced into CA6 as an effective system to replace cobalt-aluminum spinel. Blue ceramic material with low porosity and good mechanical properties was successfully prepared by doping nickel oxide and titanium oxide into CA6 using a high-temperature solid-phase method. The results show that the sintering, densification, mechanical and optical properties of the ceramic material are affected by the amount of NiO and TiO2 doping. The color for the sample is related to the energy change produced by the substitution of Ni2+ and Ti4+ for Al3+, producing yellow light absorption and blue light reflection in the visible range. Due to its good mechanical and color properties, it can be used as a new type of environmentally friendly ceramic with great industrial potential for a wide range of high-tech applications such as mobile phone backplanes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties · Recycling and utilization of industrial and municipal waste in materials production · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Effect of ZrO2 addition on densification and mechanical properties of MgAl2O4–CaAl4O7–CaAl12O19 composite[J]
2. Mechanism of pore generation in calcium hexaluminate (CA6) ceramics formed in situ from calcined alumina and calcium carbonate aggregates[J]10.1016/j.jeurceramsoc.2016.05.026 ↗
3. Sol–Gel synthesis and characterization of alumina–calcium hexaaluminate composites[J]10.1111/j.1551-2916.2005.00330.x ↗
4. Effects of the initial CaO-Al2O3 ratio on the microstructure development and mechanical properties of porous calcium hexaluminate[J]
5. Physical and mechanical characteristics of in-situ alumina/calcium hexaluminate composites[J]10.1023/A:1006683421321 ↗
6. Microstructure and phase evolution of alumina–spinel self-flowing refractory castables containing nano-alumina particles[J]10.1016/j.ceramint.2010.11.013 ↗
7. Improvement in fatigue resistance performance of corundum castables with addition of different size calcium hexaluminate particles[J]10.1016/j.ceramint.2018.09.155 ↗
8. Forming and sintering of porous calcium-hexaaluminate ceramics with hydraulic alumina[J]10.1007/s10853-006-0799-8 ↗
9. Synthesis of calcium hexaaluminate (CaAl12O19) via reverse micelle process[J]10.1016/j.jnoncrysol.2009.08.032 ↗
10. Improvement of densification and mechanical properties of MgAl2O4–CaAl4O7–CaAl12O19 composite by addition of MnO[J]10.1016/j.ceramint.2016.12.091 ↗
11. Crystal chemistry of hexaaluminates: β-alumina and magnetoplumbite structures[J]10.1016/0022-4596(89)90048-0 ↗
12. Effects of CaO addition on sintering and mechanical properties of Al2O3[J]10.1007/BF00275351 ↗
13. RafaelSalomão.Characterization of aluminum hydroxide (Al(OH)3) for use as a porogenic agent in castable ceramics[J]10.1016/j.jeurceramsoc.2014.09.010 ↗
14. Porous alumina-spinel ceramics for high temperature applications[J]10.1016/j.ceramint.2011.01.012 ↗
15. Abnormal grain growth of alumina: CaO effect[J]10.1111/j.1151-2916.2003.tb03353.x ↗
16. Novel synthesis method and characterization of porous calcium hexa‐aluminate ceramics[J]10.1111/jace.13141 ↗
17. High temperature Al2O3-CA6 insulating foamed ceramics: processing and properties[J]
18. Calcium hexaaluminate synthesis and its influence on the properties of CA2–Al2O3-based refractories[J]10.1016/j.jeurceramsoc.2015.08.034 ↗
19. Aluminum titanate-calcium dialuminate composites with low thermal expansion and high strength[J]10.1016/j.jallcom.2015.09.237 ↗
20. The influence of in-situ formation of hibonite on the properties of zirconia toughened alumina (ZTA) composites[J]10.1016/j.ceramint.2013.11.076 ↗
21. Self-reinforced Ca-hexaluminate/alumina composites with graded microstructures[J]10.1016/j.ceramint.2006.10.001 ↗
22. R-curve behavior of in-situ-toughened Al2O3:CaAl12O19 ceramic composites[J]10.1111/j.1151-2916.1996.tb08088.x ↗
23. Microstructural evolution of Ti4+-doped calcium hexaaluminate ceramics - ScienceDirect[J]10.1016/j.ceramint.2020.01.266 ↗
24. Homogeneously bulk porous calcium hexaaluminate (CaAl12O19): reactive sintering and microstructure development[J]10.1016/j.ceramint.2017.11.138 ↗
25. Peculiarities of CaO·6Al2O3 formation by using low-temperature combustion synthesis[J]10.1002/ejic.200700916 ↗
26. Evolution of crystalline aluminates from hybrid gel-derived precursors studied by XRD and multinuclear solid state MAS NMR: IV: calcium dialuminate, CaAl4O7 and calcium hexaluminate, CaAl12O19[J]
27. Ni-doped hibonite (CaAl12O19): a new turquoise blue ceramic pigment[J]10.1016/j.jeurceramsoc.2009.04.001 ↗
28. Pastoureau · 2001
29. Chromogenic mechanisms in blue-and-white porcelains[J]10.1016/j.jeurceramsoc.2020.06.065 ↗
30. Colour analysis of some cobalt-based blue pigments[J]10.1016/S0955-2219(00)00295-8 ↗
31. Solvothermal synthesis and electrochemical properties of Na2CoSiO4 and Na2CoSiO4/carbon nanotube cathode materials for sodium-ion batteries[J]
32. Hydrothermal synthesis and optical property of nano-sized CoAl2O4 pigment[J]10.1016/S0167-577X(02)00378-6 ↗
33. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics[J]10.1016/j.dental.2003.05.002 ↗
34. An overview of zirconia ceramics: basic properties and clinical applications[J]10.1016/j.jdent.2007.07.008 ↗
35. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends[J]10.1111/j.1551-2916.2009.03278.x ↗
36. Sintering effect of calcium carbonate in high-alumina refractory castables[J]10.1016/j.ceramint.2018.03.066 ↗
37. Characterization of aluminum hydroxide (Al(OH)3) for use as a porogenic agent in castable ceramics[J]10.1016/j.jeurceramsoc.2014.09.010 ↗
38. Homogeneously bulk porous calcium hexaaluminate (CaAl12O19): reactive sintering and microstructure development[J]10.1016/j.ceramint.2017.11.138 ↗
39. The effect of magnesium compounds (MgO and MgAl2O4) on the synthesis of Lanthanum magnesium hexaaluminate (LaMgAl11O19) by solid-state reaction method[J]10.1016/j.ceramint.2017.12.056 ↗
40. Effect of incorporation of nitrogen on calcium hexaaluminate[J]10.1016/j.jeurceramsoc.2020.06.057 ↗
41. Hexagonal ferrites: a review of the synthesis, properties and applications of hexaferrite ceramics[J]10.1016/j.pmatsci.2012.04.001 ↗
42. Substitution of Ti3+ and Ti4+ in hibonite (CaAl12O19)[J]10.2138/am.2014.4532 ↗
43. Colored oxides with hibonite structure: a potential route to non-cobalt blue pigments[J]10.1016/j.progsolidstchem.2016.11.001 ↗
44. Effects of single metal-ion doping on the visible-light photoreactivity of TiO2[J]10.1021/jp908088x ↗
45. Microstructural and mechanical investigation of high alumina refractory castables containing nano-titania[J]10.1016/j.ceramint.2018.09.165 ↗
46. Gibbs energy of formation of Ca3Ti8Al12O37 and phase relations and chemical potentials in the system Al2O3-TiO2-CaO[J]10.1007/s11669-012-0048-6 ↗
47. Microstructure and mechanical properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites[J]10.1016/j.jeurceramsoc.2021.08.024 ↗
48. Influence of morphological instability on grain boundary trajectory during directional solidification[J]10.1016/j.actamat.2019.04.054 ↗
49. Electrical conduction of dense Ga3+-doped SnP2O7–SnO2 composite ceramic at intermediate temperatures[J]10.1016/j.ceramint.2013.09.047 ↗
50. Kinetics and thermodynamics of densification and grain growth: insights from lanthanum doped zirconia[J]10.1016/j.actamat.2018.03.033 ↗
51. Effect of TiO2 addition on the sintering behavior, hardness and fracture toughness of an ultrafine alumina[J]
52. Ionic diffusion as a matter of lattice-strain for electroceramic thin films[J]10.1016/j.ssi.2011.09.009 ↗
53. Hexaluminates as a cleavable fiber-matrix interphase: synthesis, texture development, and phase compatibility[J]10.1016/S0955-2219(99)00255-1 ↗
54. Enhancement of the densification and thermal properties of Ca2Mg2Al28O46 ceramic by MnO addition - ScienceDirect[J]10.1016/j.ceramint.2020.04.188 ↗
55. Preparation and properties of calcium hexaluminate blue ceramics[J]
56. Synthesis and characterization of CeO2-SiO2Nanoparticles by microwave-assisted irradiation method for photocatalytic oxidation of methylene blue dye[J]
57. Thermo-optical properties of LaMg1-xNixAl11O19(0≤x≤1) hexaaluminates for metallic thermal protection system - ScienceDirect[J]10.1016/j.matlet.2011.05.093 ↗
58. Structural studies of CaAl12O19, SrAl12O19, La2/3+δ Al12–δO19, and CaAl10NiTiO19 with the hibonite structure; indications of an unusual type of ferroelectricity[J]10.1515/znb-2015-0224 ↗
59. Coordination and valent state of nickel ions in beryl and chrysoberyl crystals[J]10.1007/s00269-006-0076-z ↗
60. An overview of using solid wastes for pigment industry[J]10.1016/j.jeurceramsoc.2011.10.018 ↗
61. Production of a stable and homogeneous colloid dispersion of nano CoAl2O4 pigment for ceramic ink-jet ink[J]10.1016/j.jeurceramsoc.2014.03.022 ↗
62. Effect of holding time and pressure on the densification, microstructure and mechanical properties of hot pressed Al2O3-CA6-ZrO2/Ni multi-phase composites[J]
63. Statistical properties of residual stresses and intergranular fracture in ceramic materials[J]10.1115/1.2900782 ↗