Heat-rate-controlled hydrothermal crystallization of high-performance LiMn0.7Fe0.3PO4 cathode material for lithium-ion batteries
Source abstract
Abstract
Abstract High supersaturation degree can endow hydrothermal products with small size, high crystallinity, designed morphology and orientation. However, adjusting the hydrothermal supersaturation level in organic-free systems is still a great challenge. In this work, high supersaturation degree is feasibly achieved via a green and efficient strategy just by elevating the hydrothermal heating rate, where cubic-like LiMn0.7Fe0.3PO4 cathode material with improved electrochemical kinetics is obtained. Detailed studies reveal that the elevated heating rate could improve the critical dissolved temperature of the precursor and lead to shortened time window for nucleation, and finally give rise to high supersaturation level and fast crystallization kinetics. By this heating-rate-controlled hydrothermal strategy, cuboid-like LiMn0.7Fe0.3PO4 particles with average length of 373 nm are successfully synthesized at the optimal heating rate of 5 °C/min. After coated with conductive carbon, the LiMn0.7Fe0.3PO4/C electrode possesses enhanced conductivity for both electron and Li+, which delivers superior electrochemical properties of 166.5 mAh·g−1 and 87.3 mAh·g−1 at the rates of 0.1 C and 10 C, respectively. We believe this work provides new perspectives for the synthesis of properties-controlled nanocrystals in the hydrothermal system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Few atomic layered lithium cathode materials to achieve ultrahigh rate capability in lithium-ion batteries10.1002/adma.201700605 ↗
2. Mn substitution controlled Li-diffusion in single crystalline nanotubular LiFePO4 high rate-capability cathodes: experimental and theoretical studies10.1016/j.jpowsour.2018.10.020 ↗
3. LiFePO4 anchored on pristine graphene for ultrafast lithium battery10.1021/acsaem.8b00721 ↗
4. Improvement of electrochemical activity of LiMnPO4-based cathode by surface iron enrichment10.1016/j.jpowsour.2016.12.001 ↗
5. Mixed-carbon-coated LiMn0.4Fe0.6PO4 nanopowders with excellent high rate and low temperature performances for lithium-ion batteries10.1016/j.electacta.2016.03.017 ↗
6. Lithium diffusion in cation-mixing-free LiMn1-xFexPO4 synthesized by hydrothermal process10.1149/2.0991514jes ↗
7. Different electrochemical responses of LiFe0.5Mn0.5PO4 prepared by mechanochemical and solvothermal methods, J. Alloy
8. Microwave-assisted solvothermal synthesis and performances of LiMn0.7Fe0.3PO4 nanoplates10.1080/10426914.2017.1364754 ↗
9. Electrospun LiFe1-yMnyPO4/C nanofiber composites as self-supporting cathodes in Li-ion batteries10.1002/aenm.201100534 ↗
10. Facile synthesis of micro-spherical LiMn0.7Fe0.3PO4/C cathodes with advanced cycle life and rate performance for lithium-ion battery10.1016/j.ceramint.2016.12.025 ↗
11. High-performance lithium-ion cathode LiMn0.7Fe0.3PO4/C and the mechanism of performance enhancements through Fe substitution10.1021/am403991f ↗
12. Hydrothermal synthesis of well-dispersed LiMn0.7Fe0.3PO4/C nanocrystalline cathodes for lithium-ion batteries10.1016/S1452-3981(23)17356-1 ↗
13. The improved electrochemical performances of LiMn1-xFexPO4 solid solutions as cathodes for Lithium-ion batteries10.1080/10667857.2016.1214664 ↗
14. Preparation and electrochemical properties of LiMn1-xFexPO4/C composite cathode materials for lithium ion batteries10.1016/j.ceramint.2015.05.061 ↗
15. LiMn0.7Fe0.3PO4 nanorods grown on graphene sheets synthesized in situ by modified microwave-assisted solvothermal method as high-performance cathode materials10.1007/s10853-017-1835-6 ↗
16. Controllable synthesis of nano-sized LiFePO4/C via a high shear mixer facilitated hydrothermal method for high rate Li-ion batteries10.1016/j.electacta.2015.05.103 ↗
17. Chemical and morphological transformation through hydrothermal process for LiFePO4 preparation in organic-free system10.1016/j.electacta.2013.02.042 ↗
18. A review: conventional and supercritical hydro/solvothermal synthesis of ultrafine particles as cathode in lithium battery10.1016/j.ceramint.2017.12.236 ↗
19. Temperature-dependent crystallinity and morphology of LiFePO4 prepared by hydrothermal synthesis10.1039/c2jm30191a ↗
20. High-Energy-Density LiMn0.7Fe0.3PO4 nanorods synthesized by microwave-assisted solvothermal method10.1134/S1023193513080119 ↗
21. Effect of mechanical stirring and temperature on dynamic hydrothermal synthesis of titanate nanotubes10.1016/j.jallcom.2017.06.172 ↗
22. Fast growth of well-aligned ZnO nanowire arrays by a microwave heating method and their photocatalytic properties10.1088/0957-4484/27/43/435402 ↗
23. 3D LiCoO2 nanosheets assembled nanorod arrays via confined dissolution-recrystallization for advanced aqueous lithium-ion batteries10.1016/j.nanoen.2018.11.085 ↗
24. Green synthesis of high-performance LiFePO4 nanocrystals in pure water10.1039/C8GC02584C ↗
25. Time dependence of the size distribution, number concentration and surface area in La Mer Sulfur Sols
26. Kinetics and mechanisms of aggregative nanocrystal growth10.1021/cm402139r ↗
27. Controlling the size and magnetic properties of nano CoFe2O4 by microwave assisted co-precipitation method10.1088/2053-1591/aaa73f ↗
28. Facile hydrothermal synthesis and luminescent properties of Sm3+/Eu3+ codoped GdPO4 phosphors10.1016/j.jpcs.2017.08.031 ↗
29. An understanding of the photocatalytic properties and pollutant degradation mechanism of SrTiO3 nanoparticles10.1111/php.12586 ↗
30. Effects of heating rate on morphology and performance of lithium iron phosphate synthesized by hydrothermal route in organic-free solution10.1007/s11581-017-2287-3 ↗
31. Synthesis of LiMn0.8Fe0.2PO4 mesocrystals for high-performance Li-ion cathode materials10.1016/j.electacta.2016.09.005 ↗
32. Fast precipitation-induced LiFe0.5Mn0.5PO4/C nanorods with a fine size and large exposure of the (010) faces for high-performance lithium-ion batteries10.1016/j.jallcom.2019.04.184 ↗
33. Nonstochiometry in LiMn0.5Fe0.5PO4: structural and electrochemical properties10.1149/2.068309jes ↗
34. Metal organic frameworks derived porous lithium iron phosphate with continuous nitrogen-doped carbon networks for lithium ion batteries10.1016/j.jpowsour.2015.11.022 ↗
35. Improved electrochemical performance and capacity fading mechanism of nano-sized LiMn0.9Fe0.1PO4 cathode modified by polyacene coating10.1039/C4TA05900J ↗
36. Nonaqueous synthesis of nano-sized LiMnPO4@C as a cathode material for high performance lithium ion batteries10.1016/j.electacta.2016.02.090 ↗
37. The best addition of graphene to LiMn0.7Fe0.3PO4/C cathode material synthesized by wet ball milling combined with spray drying method10.1016/j.jallcom.2018.07.043 ↗