journal article·2021-12

Mechanical properties and microstructures of reduced graphene oxide reinforced titanium matrix composites produced by spark plasma sintering and simple shear extrusion

Sayyed Mohammad Reza Sedehi, Mohammad Khosravi, Yadollah Yaghoubinezhad

Ceramics International· Volume 47· Issue 23
Publisher page

Abstract

Abstract The present research was conducted to improve the mechanical properties of pure titanium, in which a composite reinforced with reduced graphene oxide (RGO) nanosheets was fabricated using spark plasma sintering (SPS) method and was subjected to severe plastic deformation (SPD) process at room temperature with simple shear extrusion (SSE). Its mechanical properties were investigated in terms of tensile and yield strengths applying tension and hardness tests. Moreover, characterizations were accomplished through field emission scanning electron microscopy (FE-SEM) equipped with EDS, light microscopy (LM), and X-ray diffraction (XRD). The obtained results revealed that the grain growth was observed for all the samples in the annealing step, yet the elongation in the highest percentage of RGO was severely limited. Following SSE, the grain size decreased in the severe plastic deformation and consequently, mechanical properties of composite improved. In this regard, the hardness improved from 373 HV after SPS to 536.5 HV after two passes of SSE for composite reinforced by 0.1% RGO; moreover, tensile strength enhanced up to 969 MPa. This nanocomposite might be utilized in diverse fields, particularly in bio applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Lütjering · 2007
2. Evolution of microstructure and tensile properties of in situ titanium matrix composites with volume fraction of (TiB+ TiC) reinforcements
3. Yan · 2014
4. Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties10.1016/j.scriptamat.2013.03.017 ↗
5. Microstructure and mechanical properties of P/M titanium matrix composites reinforced by in-situ synthesized TiC–TiB
6. Correlation between microstructures of SiC-reinforced titanium matrix composite and liquid route processing parameters10.1007/s10853-015-9108-8 ↗
7. Effect of composition and sintering temperature on mechanical properties of ZrO2 particulate-reinforced titanium-matrix composite10.1016/S1003-6326(11)61397-6 ↗
8. Strengthening analyses and mechanical assessment of Ti/Al2O3 nano-composites produced by friction stir processing10.1016/j.msea.2015.02.038 ↗
9. Relationship between hardness and tensile tests in titanium reinforced with yttria nanoparticles10.1016/j.msea.2005.03.070 ↗
10. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
11. Detection of individual gas molecules adsorbed on graphene10.1038/nmat1967 ↗
12. Superior thermal conductivity of single-layer graphene10.1021/nl0731872 ↗
13. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
14. Sintering effect on microstructural evolution and mechanical properties of spark plasma sintered Ti matrix composites reinforced by reduced graphene oxides10.1016/j.ceramint.2018.06.252 ↗
15. The microstructures and mechanical properties of graphene-reinforced titanium matrix composites
16. Preparation mechanism of hierarchical layered structure of graphene/copper composite with ultrahigh tensile strength
17. Effects of graphene content on the microstructure and properties of copper matrix composites
18. Investigation on arc erosion behaviors and mechanism of W70Cu30 electrical contact materials adding graphene
19. Synergistic enhancing effect for mechanical and electrical properties of tungsten copper composites using spark plasma infiltrating sintering of copper-coated graphene10.1038/s41598-017-18114-2 ↗
20. Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying10.1016/j.jallcom.2014.01.225 ↗
21. Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing, dispersion, microstructure stability and strengthening10.1016/j.matchar.2017.08.009 ↗
22. Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction10.1016/j.msea.2017.08.079 ↗
23. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
24. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
25. Azushima · CIRP Ann. - Manuf. Technol. · 2008 · 57 · 71610.1016/j.cirp.2008.09.005 ↗
26. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
27. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
28. Using high-pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
29. Developing superplasticity in a magnesium AZ31 alloy by ECAP10.1007/s10853-008-2846-0 ↗
30. Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP10.1007/s10853-010-4589-y ↗
31. Avoiding cracks and inhomogeneities in billets processed by ECAP10.1007/s10853-010-4384-9 ↗
32. Room-temperature equal channel angular extrusion of pure magnesium10.1016/j.actamat.2010.01.051 ↗
33. Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique10.1016/j.msea.2009.08.051 ↗
34. Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique10.1016/j.msea.2009.08.051 ↗
35. Crystal plasticity finite element modeling of crystallographic textures in simple shear extrusion (SSE) process10.1016/j.matdes.2016.07.030 ↗
36. Creep of doped polycrystalline Al2O310.1111/j.1151-2916.1970.tb15983.x ↗
37. Hot-pressing of magnesium aluminate spinel—I. Kinetics and densification mechanism
38. Densification of nanocrystalline NiO ceramics by spark plasma sintering10.1016/j.msea.2009.10.011 ↗
39. An analytical approach for simple shear extrusion process with a linear die profile10.1016/j.matdes.2015.06.023 ↗
40. Bagherpour · 2014
41. Advanced mechanical properties of pure titanium with ultrafine grained structure10.1016/S1359-6462(01)01089-2 ↗
42. Grain-size distribution effects in plastic flow and failure10.1016/j.msea.2006.08.116 ↗
43. Microhardness evolution and mechanical characteristics of commercial purity titanium processed by high-pressure torsion10.1016/j.msea.2014.07.030 ↗
44. Hardening by annealing and softening by deformation in nanostructured metals10.1126/science.1124268 ↗
45. The effect of annealing on tensile deformation behavior of nanostructured SPD titanium10.1016/S1359-6462(03)00395-6 ↗
46. Osseointegration of titanium, titanium alloy and zirconia dental implants, current knowledge and open questions10.1111/prd.12179 ↗
47. Suzuki · 2013
48. Balyanov · 2000
49. The corrosion behaviour of commercial purity titanium processed by high-pressure torsion10.1007/s10853-013-7988-z ↗
50. Influence of nanostructure on titanium corrosion resistance in fluoridated medium10.1080/02670836.2017.1407557 ↗
51. Effects of annealing on microstructure and mechanical properties of nano-grained titanium produced by combination of asymmetric and symmetric rolling10.1016/j.msea.2012.08.005 ↗
52. The processing of ultrafine-grained materials through the application of severe plastic deformation10.1007/s10853-006-1475-8 ↗
53. The innovation potential of bulk nanostructured materials10.1002/adem.200700078 ↗
54. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
55. Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing10.1016/S1359-6454(97)00355-8 ↗
56. Advanced mechanical properties of pure titanium with ultrafine grained structure10.1016/S1359-6462(01)01089-2 ↗
57. Review of the production of ultrafine grained and nanograined metals by applying severe plastic deformation
58. The decomposition of Si3N4 in titanium and its effect on wear properties10.1016/j.wear.2018.12.094 ↗
59. Eftekhari · 2017
60. Knacke · 1991