Porous Titanium Coatings Through Electrophoretic Deposition of TiH2 Suspensions
Source abstract
Abstract
Abstract In the biomedical field, modification of titanium surfaces to improve the osteoinductive and antibacterial behavior is widely investigated. This functionalization can be further ameliorated by providing a porous coating with high loading capacity for bioactive materials and drug delivery carriers at the implant surface. In this work, a new powder metallurgical processing route used to deposit such porous pure titanium coatings on Ti based substrates is presented. The coatings were prepared by electrophoretic deposition (EPD) of TiH2 powder suspensions followed by dehydrogenation and sintering in vacuum. The use of hydrides allowed to lower the sintering temperature below that of the α–β transition of the Ti6Al4V substrate. Measurement of the tensile bond strength confirmed a strong adhesion of the porous coating. Deposition of powders with different grain sizes resulted in porous titanium coatings with varying thickness, pore morphology, and surface roughness. The possibility to extend this coating technique to complex shaped implants is highlighted.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Electrophoretic Deposition in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. 10.1016/j.pmatsci.2008.06.00410.1016/j.pmatsci.2008.06.004 ↗
2. 10.1002/adem.20040557610.1002/adem.200405576 ↗
3. 10.1016/j.biomaterials.2004.01.02110.1016/j.biomaterials.2004.01.021 ↗
4. 10.1016/j.biomaterials.2005.12.00210.1016/j.biomaterials.2005.12.002 ↗
5. 10.1023/B:JMSM.0000042679.28493.7f10.1023/B:JMSM.0000042679.28493.7f ↗
6. 10.1016/S0142-9612(99)00242-210.1016/S0142-9612(99)00242-2 ↗
7. 10.1016/j.dental.2006.06.02510.1016/j.dental.2006.06.025 ↗
8. 10.1002/jbm.b.3146310.1002/jbm.b.31463 ↗
9. 10.1016/j.matlet.2008.04.01110.1016/j.matlet.2008.04.011 ↗
10. 10.1002/adem.20070027310.1002/adem.200700273 ↗
11. 10.1016/S0921-5093(03)00117-510.1016/S0921-5093(03)00117-5 ↗
12. 10.1039/tf940350027910.1039/tf9403500279 ↗
13. 10.4028/www.scientific.net/AMR.47-50.99510.4028/www.scientific.net/AMR.47-50.995 ↗
14. 10.1016/j.actbio.2004.11.00910.1016/j.actbio.2004.11.009 ↗
15. 10.1111/j.1600-0501.2004.01054.x10.1111/j.1600-0501.2004.01054.x ↗
16. Guidance for Industry on the Testing of Metallic Plasma Sprayed Coatings on Orthopedic Implants to Support Reconsideration of Postmarket Surveillance Requirements U.S. Department of Health and Human Services Food and Drug Administration Center for Devices and Radiological Health 2000.