Dynamic Response and Energy Absorption of 5052 Aluminum Honeycombs with Gradient‐Thickness Cell Walls under Low‐Velocity Impact
Source abstract
Abstract
To enhance the safety performance of traditional honeycomb material by reducing their instantaneous peak load during collisions, a chemical etching technique is employed to process 5052 aluminum honeycombs, fabricating honeycombs with gradient‐thickness cell walls (HGTCW) whose thickness varies linearly along the height direction. Quasistatic and low‐velocity impact compression tests are conducted using an electronic universal testing machine and drop‐weight impact tester, respectively, on both nonetched honeycombs with uniform cell walls (HUCW) and HGTCW, with etching heights of 50, 100, and 150 mm at varying impact velocities. Comparative analysis of energy dissipation mechanisms is performed through FEM using ABAQUS software. Results demonstrate that 5052 aluminum HGTCW can completely eliminate the peak load during compression, with the load exhibiting a gradual linear increase with displacement, until it reaches the plateau stage of the load–displacement curve. The stiffness of HGTCW exhibits a strong correlation with the etching height, showing a progressive reduction with increasing etching height. Furthermore, the specific energy absorption (SEA) of HGTCW improves significantly with increasing etching height and impact velocity. HGTCW specimens with different etching heights exhibit a 23.5–54.6% increase in SEA compared to HUCW specimens under dynamic impact conditions, demonstrating superior energy absorption characteristics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Fluid Dynamics Simulations and Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Harbin Institute of Technology Harbin 15001 P. R. China
Production and Sales Department Shenzhen CANSINGA Technology Co., LTD Shen Zhen 518102 P. R. China
College of Mechanical Engineering Taiyuan University of Technology Taiyuan 030024 P. R. China
Funding
National Science Fund for Distinguished Young Scholars · National Natural Science Foundation of China
References (28)
Show source-provided references
1. 10.1016/j.compstruct.2017.04.05610.1016/j.compstruct.2017.04.056 ↗
2. 10.1016/j.compstruct.2023.11739910.1016/j.compstruct.2023.117399 ↗
3. 10.1016/j.compstruct.2023.11749310.1016/j.compstruct.2023.117493 ↗
4. 10.1007/s00339-022-05583-010.1007/s00339-022-05583-0 ↗
5. 10.1080/15376494.2023.223609410.1080/15376494.2023.2236094 ↗
6. 10.1007/s00339-023-07248-y10.1007/s00339-023-07248-y ↗
7. 10.1016/j.tws.2024.11181010.1016/j.tws.2024.111810 ↗
8. 10.1016/j.ijsolstr.2015.03.03610.1016/j.ijsolstr.2015.03.036 ↗
9. 10.1016/j.ijsolstr.2011.01.01710.1016/j.ijsolstr.2011.01.017 ↗
10. 10.1016/j.ijmecsci.2014.02.00810.1016/j.ijmecsci.2014.02.008 ↗
11. 10.1016/j.ijimpeng.2013.12.00910.1016/j.ijimpeng.2013.12.009 ↗
12. 10.1080/13588265.2015.104132410.1080/13588265.2015.1041324 ↗
13. 10.1016/j.tws.2014.07.01610.1016/j.tws.2014.07.016 ↗
14. 10.1016/j.ijsolstr.2017.08.01310.1016/j.ijsolstr.2017.08.013 ↗
15. 10.1016/j.ijmecsci.2020.10598710.1016/j.ijmecsci.2020.105987 ↗
16. 10.1016/j.engstruct.2022.11432710.1016/j.engstruct.2022.114327 ↗
17. 10.1016/j.compstruct.2015.04.05710.1016/j.compstruct.2015.04.057 ↗
18. Ogasawara N. · Mech. Mater. Eng. · 2010 · 4 · 1338
19. 10.1016/j.jsv.2023.11768210.1016/j.jsv.2023.117682 ↗
20. 10.1016/j.istruc.2023.03.07410.1016/j.istruc.2023.03.074 ↗
21. 10.1016/j.tws.2015.11.02310.1016/j.tws.2015.11.023 ↗
22. 10.5539/mas.v10n2p9010.5539/mas.v10n2p90 ↗
23. 10.1016/j.ast.2023.10873910.1016/j.ast.2023.108739 ↗
24. 10.1017/CBO978113987832610.1017/CBO9781139878326 ↗
25. 10.1016/j.ijmecsci.2009.03.00210.1016/j.ijmecsci.2009.03.002 ↗
26. 10.1016/j.ijmecsci.2004.12.01210.1016/j.ijmecsci.2004.12.012 ↗
27. 10.1016/j.ijimpeng.2012.02.00810.1016/j.ijimpeng.2012.02.008 ↗
28. 10.1016/j.matdes.2015.03.00410.1016/j.matdes.2015.03.004 ↗