journal article·2024-08Open access

Design and Development of In‐Process‐Resolution‐Tunable Stereolithography System Utilizing Two‐Photon Polymerization

Makoto Shinohara, Takashi Ushida, Katsuko S. Furukawa

Advanced Engineering Materials· Volume 26· Issue 15

Abstract

Two‐photon lithography is considered a promising technology because it can achieve high resolution up to scale of 100 nm among additional processing technologies; further, it can be used to fabricate nano‐/microstructures. However, it requires an unrealistic long time to obtain a practical model that is close to the human organ diameter in the order of millimeters. In this study, an in‐process‐resolution‐tunable (iPRT) stereolithography system is reported, that realizes an optimal laser processing pathway using a new algorithm that automatically generates the processing pathway obtained by dividing the fabrication area by the effect of microstructure disappearance during the surface offset. It is demonstrated that the aforementioned algorithm can produce structures up to 50 times faster than the conventional methods and can be applied to cell culture scaffold for regenerative medicine.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nonlinear Optical Materials Studies · Nanofabrication and Lithography Techniques · Photochromic and Fluorescence Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering School of Engineering The University of Tokyo 7-3-1 Hongo Bunkyo-ku Tokyo 113-8654 Japan

Department of Bioengineering School of Engineering The University of Tokyo 7-3-1 Hongo Bunkyo-ku Tokyo 113-8654 Japan

Funding

Japan Society for the Promotion of Science

References (37)

Show source-provided references
1. 10.1088/1468-6996/16/3/03350210.1088/1468-6996/16/3/033502 ↗
2. 10.3390/polym1412233610.3390/polym14122336 ↗
3. 10.1016/j.ijpharm.2023.12278010.1016/j.ijpharm.2023.122780 ↗
4. 10.1007/s00170-021-07123-110.1007/s00170-021-07123-1 ↗
5. 10.1016/j.heliyon.2019.e0280410.1016/j.heliyon.2019.e02804 ↗
6. 10.1016/j.ijpharm.2020.11943010.1016/j.ijpharm.2020.119430 ↗
7. 10.1016/j.dib.2016.09.04210.1016/j.dib.2016.09.042 ↗
8. 10.1021/acsabm.1c0028310.1021/acsabm.1c00283 ↗
9. 10.1002/adhm.20140044210.1002/adhm.201400442 ↗
10. 10.15302/J-ENG-201501510.15302/J-ENG-2015015 ↗
11. 10.1016/j.ejps.2019.05.00810.1016/j.ejps.2019.05.008 ↗
12. 10.1002/marc.20220058610.1002/marc.202200586 ↗
13. 10.4155/fmc.10.25310.4155/fmc.10.253 ↗
14. 10.1002/term.5710.1002/term.57 ↗
15. 10.1038/3508913010.1038/35089130 ↗
16. 10.1039/b902159k10.1039/b902159k ↗
17. 10.1002/elsc.20090000210.1002/elsc.200900002 ↗
18. 10.1002/anie.20060399510.1002/anie.200603995 ↗
19. 10.1364/OE.16.01659210.1364/OE.16.016592 ↗
20. 10.1039/C3LC51169C10.1039/C3LC51169C ↗
21. 10.1016/j.biomaterials.2011.08.07710.1016/j.biomaterials.2011.08.077 ↗
22. 10.1016/j.actbio.2018.04.03010.1016/j.actbio.2018.04.030 ↗
23. 10.1021/acsami.9b0409610.1021/acsami.9b04096 ↗
24. 10.1364/OE.18.01719310.1364/OE.18.017193 ↗
25. 10.1002/adma.20120202410.1002/adma.201202024 ↗
26. 10.1002/mabi.20100047710.1002/mabi.201000477 ↗
27. 10.1016/j.biomaterials.2012.11.03110.1016/j.biomaterials.2012.11.031 ↗
28. 10.1016/j.biomaterials.2013.11.08910.1016/j.biomaterials.2013.11.089 ↗
29. 10.1299/jbse.20-0000910.1299/jbse.20-00009 ↗
30. 10.1016/j.optlaseng.2015.02.00610.1016/j.optlaseng.2015.02.006 ↗
31. 10.1063/1.282445510.1063/1.2824455 ↗
32. 10.1109/TUFFC.2014.307010.1109/TUFFC.2014.3070 ↗
33. 10.1038/s41467-019-10249-210.1038/s41467-019-10249-2 ↗
34. 10.1016/j.msec.2015.11.07110.1016/j.msec.2015.11.071 ↗
35. 10.18063/ijb.v9i2.65010.18063/ijb.v9i2.650 ↗
36. 10.1126/science.aax876010.1126/science.aax8760 ↗
37. 10.1364/OE.19.01173210.1364/OE.19.011732 ↗