journal article·2024-06Open access

Parameters Optimization of Active Flexible Tool‐Assisted Shear Thickening Polishing Method for Concave Surface

Xinyu Chen, Jingyu Cai, Lanying Shao, Binghai Lyu

Advanced Engineering Materials· Volume 26· Issue 11

Abstract

An innovative approach, active flexible tool‐assisted shear thickening polishing (AFT‐STP), is introduced to overcome the limitations of low efficiency involved in the STP process of the concave surface. The principle and characteristics of AFT‐STP are presented, accompanied by the design of a flexible tool structure and the creation of an experimental setup. Utilizing the Taguchi method, experiments are planned and results are assessed via the signal‐to‐noise ratio to optimize process parameters. A variance analysis is then used to ascertain the relative influence of four key parameters—polishing speed, polishing gap, abrasive particle size, and abrasive concentration on the polishing performance of quartz glass in STP. Under the optimal parameters, a concave quartz glass workpiece with diameter Ø 20 mm and curvature radius 488 mm is polished, the average surface roughness Sa of the five measuring points on the surface decreases from 142.18 ± 8.63 (Avg. ± Std.) nm to 5.34 ± 1.16 nm in 45 min with MRR 57.3 nm min−1, and the surface defects of the processing area are completely removed, leaving only minor pits. The results show that the AFT‐STP is an effective method for high‐quality polishing of concave surfaces.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical Engineering Zhejiang University of Technology Hangzhou 310014 China

Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Ministry of Education and Zhejiang Province Zhejiang University of Technology Hangzhou 310014 Zhejiang China

Funding

Natural Science Foundation of Zhejiang Province · National Natural Science Foundation of China

References (30)

Show source-provided references
1. 10.3390/met909094510.3390/met9090945 ↗
2. 10.3901/JME.2020.17.23310.3901/JME.2020.17.233 ↗
3. 10.1016/j.jmapro.2023.05.06410.1016/j.jmapro.2023.05.064 ↗
4. 10.1016/j.apsusc.2019.01.12010.1016/j.apsusc.2019.01.120 ↗
5. 10.3390/mi1412221010.3390/mi14122210 ↗
6. 10.1007/978-981-16-9613-8_210.1007/978-981-16-9613-8_2 ↗
7. 10.1504/IJAT.2019.10349110.1504/IJAT.2019.103491 ↗
8. 10.1177/135065011881769410.1177/1350650118817694 ↗
9. 10.1007/s11465-023-0766-y10.1007/s11465-023-0766-y ↗
10. 10.1016/j.ijmachtools.2015.04.01010.1016/j.ijmachtools.2015.04.010 ↗
11. 10.1016/j.cirp.2020.04.09310.1016/j.cirp.2020.04.093 ↗
12. 10.1016/j.jmrt.2020.03.02810.1016/j.jmrt.2020.03.028 ↗
13. 10.1016/j.jmapro.2023.10.03110.1016/j.jmapro.2023.10.031 ↗
14. 10.1016/j.jmrt.2023.12.12210.1016/j.jmrt.2023.12.122 ↗
15. 10.1016/j.jmapro.2024.01.04010.1016/j.jmapro.2024.01.040 ↗
16. 10.1016/j.cirp.2017.04.08210.1016/j.cirp.2017.04.082 ↗
17. 10.1007/s00170-019-03600-w10.1007/s00170-019-03600-w ↗
18. 10.1007/s00170-021-07176-210.1007/s00170-021-07176-2 ↗
19. 10.3390/lubricants1102005810.3390/lubricants11020058 ↗
20. 10.1016/j.jmrt.2020.12.11210.1016/j.jmrt.2020.12.112 ↗
21. 10.1016/j.cirp.2016.06.00310.1016/j.cirp.2016.06.003 ↗
22. 10.1364/AO.34.00374310.1364/AO.34.003743 ↗
23. 10.1109/24.38737510.1109/24.387375 ↗
24. 10.1016/j.surfcoat.2023.12977110.1016/j.surfcoat.2023.129771 ↗
25. 10.1007/s00170-019-03477-910.1007/s00170-019-03477-9 ↗
26. 10.1016/j.ceramint.2020.05.26310.1016/j.ceramint.2020.05.263 ↗
27. 10.1016/j.jmrt.2023.07.11210.1016/j.jmrt.2023.07.112 ↗
28. 10.1016/j.precisioneng.2015.04.01410.1016/j.precisioneng.2015.04.014 ↗
29. 10.1149/2162-8777/ac305a10.1149/2162-8777/ac305a ↗
30. 10.1364/OE.11.00095810.1364/OE.11.000958 ↗