Laser‐Powder Melt Pool Solidification Dynamics and Microstructural Engineering of Ti‐5553 Microlattices
Source abstract
Abstract
The fine geometric and topological control afforded by additive manufacturing technologies has enabled the manufacture of architected materials across length scales, and enabling tunable mechanical performance as a function of local and global design. Progress has been made to tune the mechanical response of architected materials through geometry, but understanding how the geometry and processing conditions will inform the microstructure remains a challenge due to the rapid solidification in laser powder bed fusion. This study uses in situ X‐ray imaging and electron backscatter diffraction microscopy to demonstrate that the melt pool size, microstructure morphology, and elastic strain distribution is influenced by a combination of lattice geometry and laser processing conditions. These results indicate that within larger melt pools the local thermal gradients are sufficient to enable a columnar‐to‐equiaxed transition across the melt pool. The solidification mechanisms producing these microstructures are examined across the first 5 ms of melting and solidification, described via in situ high‐speed X‐ray imaging and mirrored via multiphysics simulation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science & Engineering Johns Hopkins University Baltimore 21230 MD USA
Materials Science Division Lawrence Livermore National Laboratory Livermore 94550 CA USA
Funding
U.S. Department of Energy · Laboratory Directed Research and Development · Office of Naval Research
References (54)
Show source-provided references
1. 10.1016/S0022-5096(01)00010-210.1016/S0022-5096(01)00010-2 ↗
2. 10.1016/j.jmps.2018.12.01510.1016/j.jmps.2018.12.015 ↗
3. 10.1038/nmat469410.1038/nmat4694 ↗
4. 10.1016/j.matdes.2021.10947910.1016/j.matdes.2021.109479 ↗
5. N. A.Fleck V. S.Deshpande M. F.Ashby inProc. of the Royal Society A: Mathematical Physical and Engineering Sciences 2010 Vol.466 pp.2495–2516 https://doi.org/10.1098/rspa.2010.0215.10.1098/rspa.2010.0215 ↗
6. 10.1016/j.compstruct.2024.11804210.1016/j.compstruct.2024.118042 ↗
7. 10.1016/j.ijmachtools.2023.10409910.1016/j.ijmachtools.2023.104099 ↗
8. 10.1016/B978-0-323-35321-2.00018-210.1016/B978-0-323-35321-2.00018-2 ↗
9. 10.1007/978‐3‐642‐35950‐7_16866‐110.1007/978‐3‐642‐35950‐7_16866‐1 ↗
10. Frazier W. E. · Metal Addit. Manuf. : A Rev. · 2014 · 23 · 1917
11. 10.1016/j.mser.2021.10060610.1016/j.mser.2021.100606 ↗
12. 10.1016/j.matdes.2021.10948910.1016/j.matdes.2021.109489 ↗
13. 10.1016/j.jmbbm.2015.09.02010.1016/j.jmbbm.2015.09.020 ↗
14. 10.1016/j.addma.2020.10143310.1016/j.addma.2020.101433 ↗
15. 10.1016/j.addma.2019.10089010.1016/j.addma.2019.100890 ↗
16. 10.1007/s40194-020-00907-110.1007/s40194-020-00907-1 ↗
17. 10.1002/admt.20190098110.1002/admt.201900981 ↗
18. 10.1016/j.matchar.2021.11135010.1016/j.matchar.2021.111350 ↗
19. 10.1007/s11661-021-06273-x10.1007/s11661-021-06273-x ↗
20. 10.1007/s11837-019-03618-110.1007/s11837-019-03618-1 ↗
21. 10.1016/j.msea.2020.14009310.1016/j.msea.2020.140093 ↗
22. 10.1016/j.actamat.2014.12.05410.1016/j.actamat.2014.12.054 ↗
23. 10.1007/s11837-015-1759-z10.1007/s11837-015-1759-z ↗
24. 10.1016/j.msea.2019.01.03110.1016/j.msea.2019.01.031 ↗
25. Simonelli M. · On the Texture Formation of Selective Laser Melted Ti‐6Al‐4V · 2014 · 45 · 2863
26. 10.1016/j.msea.2013.08.03210.1016/j.msea.2013.08.032 ↗
27. 10.1038/s41427-020-0212-010.1038/s41427-020-0212-0 ↗
28. 10.1016/j.jmst.2020.05.00410.1016/j.jmst.2020.05.004 ↗
29. 10.1016/j.jmrt.2021.05.05710.1016/j.jmrt.2021.05.057 ↗
30. 10.1016/j.actamat.2017.02.02510.1016/j.actamat.2017.02.025 ↗
31. 10.1002/adem.20190018510.1002/adem.201900185 ↗
32. Matthews M. · 2018
33. 10.1038/s41467-022-28694-x10.1038/s41467-022-28694-x ↗
34. 10.1016/j.optlastec.2022.10881110.1016/j.optlastec.2022.108811 ↗
35. 10.1088/0022-3727/40/18/03710.1088/0022-3727/40/18/037 ↗
36. 10.2172/146617910.2172/1466179 ↗
37. Martin A. · Rev. Sci. Instrum. · 2022 · 93 · 041304
38. 10.1063/1.501723610.1063/1.5017236 ↗
39. 10.1038/nmeth.208910.1038/nmeth.2089 ↗
40. 10.1046/j.1365-2818.2002.01010.x10.1046/j.1365-2818.2002.01010.x ↗
41. 10.1107/S090904951100289510.1107/S0909049511002895 ↗
42. 10.1007/BF0266733310.1007/BF02667333 ↗
43. J.Ye A. M.Rubenchik M. F.Crumb G.Guss M. J.Matthews inConf. on Lasers and Electro‐Optics Washington D.C.: OSA2018 p.JW2A.117 https://doi.org/10.1364/CLEO_AT.2018.JW2A.117.10.1364/CLEO_AT.2018.JW2A.117 ↗
44. Fullwood D. · 2015
45. 10.1088/1757‐899X/375/1/01200310.1088/1757‐899X/375/1/012003 ↗
46. 10.1016/S1369-7021(12)70163-310.1016/S1369-7021(12)70163-3 ↗
47. 10.1063/1.302654210.1063/1.3026542 ↗
48. 10.1038/s41598-020-58598-z10.1038/s41598-020-58598-z ↗
49. 10.1016/j.matdes.2017.11.02110.1016/j.matdes.2017.11.021 ↗
50. 10.1557/mrs.2019.23110.1557/mrs.2019.231 ↗
51. 10.1007/s40516-023-00243-410.1007/s40516-023-00243-4 ↗
52. 10.3390/ma1316355610.3390/ma13163556 ↗
53. 10.3390/ma1423717610.3390/ma14237176 ↗
54. Yang P. · Addit. Manuf. · 2023 · 76 · 103769