A novel combustion fuel for the synthesis of nanocrystalline ZnAl2O4 particles based on the thermodynamic correlations and their structural and optical studies
Source abstract
Abstract
Abstract ZnAl2O4 nanocrystalline particles were prepared using the solution combustion method using a new combustion fuel, Leucine. The prepared samples' structural, microstructural–elemental composition, and optical characteristics were investigated using XRD, SEM-EDS, and UV–Visible spectroscopy. As-synthesized ZnAl2O4 nanoparticles are polycrystalline, with no secondary phases, and crystallized in a cubic - spinel structure. The polycrystalline nature of the prepared sample is due to the exothermicity of fuel and oxidizer, which demonstrate that the fuel utilized (Leucine) provided adequate energy for the production of nanoparticles in their as-synthesized form, as supported by adiabatic temperature through thermodynamic calculations. The thermodynamic calculations also include a universal method to estimate the specific heat capacity at constant pressure. Furthermore, even after 2 h of calcination at 600 °C, ZnAl2O4 exhibits a single phase with no secondary phases, indicating the material stability and single-phase nature. The crystallinity of ZnAl2O4 nanoparticles was observed to increase with increasing annealing temperature. SEM micrographs of as-synthesized samples exhibit the formation of dense particles, voids, and pores in the as-synthesized sample. In addition, tiny aggregates were detected on the surface of more prominent clusters, which reduced as the calcination progressed. In addition, calcined samples exhibit a greater optical reflectance than as-synthesized samples. Tauc's graphs were used to compute the optical energy bandgap. The calculated energy band gap is redshifted to that of the bulk material. The bandgap energy decreases upon calcination, suggesting that the prepared materials have a larger crystallite size or more crystallinity. Correlations were found between the Tad, and the structural and optical properties of the prepared samples. The findings suggest that Leucine could be used as a novel combustion fuel to produce crystalline ZnAl2O4 nanoparticles in their as-synthesis form.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Thermal and Kinetic Analysis · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. The novel low-temperature synthesis of nanocrystalline MgAl2O4 spinel using "gel" precursors10.1016/S0025-5408(02)00740-7 ↗
2. ZnAl2O4-Functionalized zinc oxide microstructures for highly selective hydrogen gas sensing applications10.1002/pssa.201700772 ↗
3. Synthesis and characterization of zinc-aluminum oxide thin films by sol-gel technique10.1016/S0254-0584(00)00270-4 ↗
4. Catalytic properties of Pd supported on ZnO/ZnAl2O4/Al2O3 mixtures in dimethyl ether auto thermal reforming10.1016/j.apcatb.2008.07.012 ↗
5. Metal-support effects of platinum supported on zinc aluminate10.1016/S0042-207X(01)00204-4 ↗
6. Rhodium complexes supported on zinc aluminate spinel as catalysts for hydroformylation and hydrogenation: preparation and activity10.1016/S1381-1169(02)00073-0 ↗
7. Optical properties of Cr doped ZnAl2O4 nanoparticles with Spinel structure synthesized by hydrothermal method
8. Solvothermal synthesis and characterization of nanosized zinc aluminate spinel used in iso-butane combustion10.1016/j.jallcom.2009.11.151 ↗
9. Synthesis of ZnAl2O4 and evaluation of the response in propane atmospheres of pellets and thick films manufactured with powders of the oxide10.3390/s21072362 ↗
10. Synthesis of zinc aluminate (ZnAl2O4) spinel and its application as a photocatalyst10.1590/S1516-14392014005000073 ↗
11. Rapid annealing: a novel processing technique for Cr: ZnAl2O4 nanoparticles10.1016/j.jallcom.2017.09.026 ↗
12. Sol-gel synthesis and characterization of ZnAl2O4 powders for transparent ceramics10.1016/j.ceramint.2018.11.179 ↗
13. Structural, elastic, thermophysical and dielectric properties of zinc aluminate (ZnAl2O4)10.1016/j.jeurceramsoc.2003.06.001 ↗
14. Effect of calcination temperature on structural and optical properties of MAl2O4 (M = Ni, Cu, Zn) aluminate spinel nanoparticles10.1007/s40145-019-0317-5 ↗
15. Structural and optical properties of ZnAl2O+ powders synthesized by solution combustion method: effects of a mixture of fuels10.1016/j.ijleo.2020.164170 ↗
16. Effect of Cu2+ ions on structural, morphological, optical and magnetic behaviors of ZnAl2O4 spinel
17. Preparation of mesoporous ZnAl2O4 nanoflakes by ion exchange from a Na-dawsonite parent material in the presence of an ionic liquid10.1039/C8RA10524C ↗
18. Microwave-assisted combustion synthesis of photoluminescent ZnAl2O4:Eu nanopowders10.1088/2053-1591/ab5869 ↗
19. Prediction of heat capacities of solid inorganic salts from group contributions10.1021/ie9501485 ↗
20. The effect of fuel and fuel-oxidizer combinations on ZnO nanoparticles synthesized by solution combustion technique10.1016/j.apt.2015.07.010 ↗
21. Young
22. Optical properties and versatile photocatalytic degradation ability of MAl2O4 (M=Ni,Cu ,Zn )aluminate spinel nanoparticles10.1007/s10854-018-8924-4 ↗
23. Combustion synthesis of Al-doped ZnO nanoparticles using a new fuel and the study of its structural, microstructural and optical properties
24. Characterization of ZnAl2O4 spinel obtained by hydrothermal and microwave-assisted combustion method: a comparative study10.1590/1980-5373-mr-2016-0977 ↗