journal article·2022-08Open access

Abrasion behavior and functional properties of composite vitreous enamel coatings fabricated with the addition of 316L stainless steel flakes

Francesca Russo, Vigilio Fontanari, Stefano Rossi

Ceramics International· Volume 48· Issue 16

Abstract

Vitreous enamels are a type of inorganic coating used to protect metals from corrosion and weathering. Their durability is mainly determined by the resistance of the surface to mechanical stresses and damages. It is therefore crucial to improve enamel’s mechanical properties since the brittleness of the glassy matrix can lead to catastrophic failure of the coating. The purpose of this study is to investigate the possibility of improving the abrasion resistance of enamel coatings by adding 316L stainless-steel flakes, used as a second ductile toughening additive. The abrasion resistance of the coatings has been studied by using the P.E.I. abrasion test, coupled with Electrochemical Impedance Spectroscopy (EIS) measurements, and SEM observations. The abrasion mechanisms were investigated thoroughly, and the influence of the additive on the functional properties of the coating was taken under consideration. The stainless steel flakes proved useful in improving the coating’s abrasion resistance without compromising other functional properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Durability of vitreous enamel coatings and their resistance to abrasion, chemicals, and corrosion: a review10.1007/s11998-020-00415-3 ↗
2. Corrosion resistances of steel pipe coated with two types of enamel by two coating processes10.1007/s11665-018-3656-4 ↗
3. Microstructure and corrosion resistance of enamel coatings applied to smooth reinforcing steel10.1016/j.conbuildmat.2012.04.059 ↗
4. Updated definition of glass-ceramics10.1016/j.jnoncrysol.2018.01.033 ↗
5. Chemical durability of porcelain enamels10.1111/j.1151-2916.1945.tb14540.x ↗
6. Chemically resistant enamel10.1002/9780470640906.ch32 ↗
7. A nondestructive methodology for the study of colored enamels: insights into manufacturing and weathering processes10.1111/jace.12402 ↗
8. Silicon nitride modified enamel coatings enable high thermal shock and corrosion resistances for steel protection10.1016/j.surfcoat.2021.127474 ↗
9. Effect of NiCrAlY platelets inclusion on the mechanical and thermal shock properties of glass matrix composites10.1016/j.msea.2010.10.015 ↗
10. Fire resistance and mechanical properties of enamelled aluminium foam10.1016/j.matdes.2017.06.064 ↗
11. Evaluation of the abrasion resistance of enamel coatings10.1016/j.cep.2012.10.009 ↗
12. Tribological behaviour of enamel coatings10.1016/j.wear.2019.02.002 ↗
13. Abrasion resistant glass-ceramic coatings reinforced with WC-nanoparticles10.1016/j.surfcoat.2021.127275 ↗
14. The aesthetic and functional properties of enamel coatings on steel10.1016/j.matdes.2010.04.030 ↗
15. Abrasion resistance of vitreous enamel coatings in function of frit composition and particles presence10.1016/j.wear.2015.01.058 ↗
16. Effects of quartz and feldspar on microstructure and friction and wear properties of enamel coating
17. Influence of mill additives on vitreous enamel properties10.1016/j.matdes.2013.10.059 ↗
18. Abrasion and chemical resistance of composite vitreous enamel coatings with hard particles10.1002/sia.5849 ↗
19. TiB2 embedded borosilicate coatings with improved wear resistance10.1080/02670844.2021.1999726 ↗
20. Influence of addition of hard particles on the mechanical and chemical behavior of vitreous enamel10.1016/j.surfcoat.2018.09.062 ↗
21. Microstructural analysis and surface modification of a vitreous enamel modified with corundum particles10.1002/adem.201900231 ↗
22. The influence of the size of corundum particles on the properties of chemically resistant porcelain enamels10.1016/j.ceramint.2021.01.001 ↗
23. Influence of graphene addition on the mechanical and surface properties of vitreous enamel coatings10.1016/j.surfcoat.2020.126071 ↗
24. Phenomena and mechanisms of crack propagation in glass-ceramics10.1016/j.jmbbm.2007.11.005 ↗
25. Experimental design and performance analysis of alumina coatings deposited by a detonation spray process
26. Recent progress on wear-resistant materials: designs, properties, and applications10.1002/advs.202003739 ↗
27. Toughening of glasses by metallic particles10.1111/j.1151-2916.1981.tb10313.x ↗
28. Development and mechanical properties of metal–particulate glass matrix composites from recycled glasses10.1016/j.compositesa.2003.09.022 ↗
29. Introduction to composite materials
30. Self-healing metal-enamel composite coating and its protection for TiAl alloy against oxidation under thermal shock in NaCl solution10.1016/j.corsci.2020.108526 ↗
31. Improving the fracture toughness of MgO–Al2O3–SiO2 glass/molybdenum composites by the microdispersion of flaky molybdenum particles10.1023/A:1018673318032 ↗
32. Preparation, microstructure and mechanical properties of metal-particulate/glass-matrix composites10.1016/S0266-3538(96)00102-9 ↗
33. Mechanical behaviour of borosilicate glass-copper composites10.1016/S1359-835X(97)00052-3 ↗
34. Mechanical properties of phosphate glass-ceramic-316 L stainless steel composites10.1007/BF00356414 ↗
35. Heat treatment for strengthening silicon carbide ceramic matrix composites
36. Ductile particle ceramic matrix composites— scientific curiosities or engineering materials?10.1016/j.jeurceramsoc.2007.12.009 ↗
37. Mechanical and tribological properties of ceramic-matrix friction materials with steel fiber and mullite fiber10.1016/j.matdes.2014.01.017 ↗
38. Abrasive wear behavior of a brittle matrix (MoSi2) composite reinforced with a ductile phase (Nb)10.1016/S0043-1648(01)00747-5 ↗
39. 1996
40. Latest in aluminium enamels
41. Andrews · 2011
42. ASTM A240 "Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications", ASTM International: West Conshohocken, PA, United States.
43. UNI EN ISO 4288 · 2000
44. Corrosion behaviour of 316L stainless steel and anti-corrosion materials in a high acidified chloride solution10.1016/j.apsusc.2014.09.205 ↗
45. Three-body abrasive wear of ceramic materials10.1016/0043-1648(94)90082-5 ↗
46. Wear by hard particles
47. Porcelain enamels: past, present and future
48. Umbertazzi · 2002
49. Determination of an effective viscosity of powders as a function of temperature
50. Heterogeneous bubble nucleation dynamics10.1017/jfm.2020.761 ↗
51. Effect pigments—past, present and future10.1016/j.porgcoat.2005.07.003 ↗
52. A comparative review of the aqueous corrosion of glasses, crystalline ceramics, and metals10.1038/s41529-018-0037-2 ↗
53. Electrochemical impedance spectroscopy for studying the degradation of enamel coatings10.1016/S0010-938X(01)00149-4 ↗
54. Significance of Pourbaix diagrams to study the corrosion behaviour of hardfacing alloys based on chromium carbides at 298 K (25 °C)10.1007/s40735-016-0047-y ↗