Phase evolution of YAG powders obtained by gel combustion combined with field-assisted rapid synthesis technique
Source abstract
Abstract
Abstract Yttrium aluminum garnet (YAG) nanopowders were synthesized by a novel method combining gel combustion and field-assisted rapid synthesis technique. It is noted that hexagonal YAlO 3 (YAH) is formed first at 800–830 °C by crystallization from the amorphous, and completely transforms to YAG at about 925 °C. The grain size of YAG powders calcined at 925 °C for 3 min is about 60 nm. Moreover, the phase evolution due to different heat treatment methods was also investigated. The results indicate that the crystallization pathways are related to the atmosphere and heating rate. In air, YAG is directly crystallized from amorphous precursors without any intermediate phases. In an anoxic atmosphere, phase formation follows an amorphous-YAH-YAG route at a rapid heating rate, while the amorphous-YAH+YAG-YAG route is observed in the case of slow heating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Advanced ceramic materials synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Phase formation in yttrium aluminum garnet powders synthesized by chemical methods10.1023/A:1004709401795 ↗
2. Novel synthesis of Y3Al5O12 leading to transparent ceramics10.1016/S0038-1098(01)00293-9 ↗
3. Effect of ball-milling granulation with PVB adhesive on the sinterability of co-precipitated Yb:YAG nanopowders10.1016/j.jallcom.2013.12.022 ↗
4. Fabrication of polycrystalline, transparent YAG ceramics by a solid-state reaction method10.1111/j.1151-2916.1995.tb08389.x ↗
5. Solid-state reactive sintering of transparent polycrystalline Nd:YAG ceramics10.1111/j.1551-2916.2006.01051.x ↗
6. Structural and optical properties of highly Nd-doped yttrium aluminum garnet ceramics from alkoxide and glycolate precursors10.1111/j.1551-2916.2006.01000.x ↗
7. Sol–gel processing and sintering of yttrium aluminum garnet (YAG) powders10.1007/BF00360748 ↗
8. Agglomeration control of Nd:YAG nanoparticles via freeze drying for transparent Nd:YAG ceramics10.1111/j.1551-2916.2009.02987.x ↗
9. Co-precipitation synthesis and sintering of yttrium aluminium garnet (YAG) powders: the effect of precipitant10.1016/S0955-2219(00)00116-3 ↗
10. YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution10.1016/j.jeurceramsoc.2009.05.037 ↗
11. YAG:Ce phosphor particles prepared by ultrasonic spray pyrolysis10.1016/S0025-5408(00)00257-9 ↗
12. Nanostructured Nd:YAG powders via gel combustion: the influence of citrate-to-nitrate ratio10.1016/j.ceramint.2006.09.002 ↗
13. Influence of fuels on the morphology of undoped Y3Al5O12 and photoluminescence of Y3Al5O12:Eu3+ prepared by a combustion method10.1016/j.materresbull.2010.05.029 ↗
14. Synthesis and crystallization of yttrium–aluminium garnet and related compounds10.1007/BF00351307 ↗
15. Spark plasma sintering kinetics of pure α-alumina10.1111/j.1551-2916.2011.04424.x ↗
16. Effects of heating rate on microstructure and transparency of spark-plasma-sintered alumina10.1016/j.jeurceramsoc.2008.03.015 ↗
17. Fine-grained transparent MgAl2O4 spinel obtained by spark plasma sintering of commercially available nanopowders10.1016/j.ceramint.2011.06.045 ↗
18. Densification behavior of a fine-grained MgAl2O4 spinel during spark plasma sintering (SPS)10.1016/j.scriptamat.2010.06.012 ↗
19. Transparent yttrium aluminum garnet (YAG) ceramics by spark plasma sintering10.1016/j.jeurceramsoc.2007.02.193 ↗
20. Effect of the spark plasma sintering (SPS) parameters and LiF doping on the mechanical properties and the transparency of polycrystalline Nd-YAG10.1016/j.ceramint.2012.03.066 ↗
21. Transparent YAG obtained by spark plasma sintering of co-precipitated powder-influence of dispersion route and sintering parameters on optical and microstructural characteristics10.1016/j.jeurceramsoc.2012.02.052 ↗
22. Nano-hafnium diboride powders synthesized using a spark plasma sintering apparatus10.1111/j.1551-2916.2012.05141.x ↗
23. Synthesis of nanosized zirconium carbide powders by a combinational method of sol–gel and pulse current heating10.1016/j.jeurceramsoc.2013.07.003 ↗
24. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
25. Sol–gel combustion synthesis of nanocrystalline YAG powder from metal–organic precursors10.1111/j.1551-2916.2008.02505.x ↗
26. Efficient solid-state route for the preparation of spherical YAG:Ce phosphor particles10.1016/j.jallcom.2010.11.143 ↗
27. Co-precipitation synthesis route to yttrium aluminum garnet (YAG) transparent ceramics10.1016/j.jeurceramsoc.2012.02.040 ↗
28. Phase selection in precursor-derived yttrium aluminum garnet and related Al2O3–Y2O3 compositions10.1557/JMR.2005.0133 ↗
29. Non-equilibrium phase synthesis in Al2O3–Y2O3 by spray pyrolysis of nitrate precursors10.1016/S1359-6454(01)00174-4 ↗
30. Phase evolution of yttrium aluminium garnet (YAG) in a citrate–nitrate gel combustion process10.1039/B316434A ↗
31. Spark plasma sintering of alumina10.1111/j.1151-2916.2002.tb00381.x ↗
32. Synthesis of yttrium aluminum garnet from a mixed-metal citrate precursor10.1111/j.1151-2916.2000.tb01367.x ↗
33. Synthesis of yttrium aluminum garnet by reverse strike precipitation10.1557/JMR.1992.0706 ↗
34. Synthesis and white light emission of Dy3+ ions doped hexagonal structure YAlO3 nanocrystalline10.1016/j.jlumin.2011.10.019 ↗
35. Formation of alkoxy-derived yttrium aluminium oxides10.1007/BF01142034 ↗
36. Synthesis of polycrystalline yttrium iron garnet and yttrium aluminium garnet from organic precursors10.1007/BF02387841 ↗
37. Ce-doped YAG phosphors prepared via sol–gel method: effect of some modular parameters10.1016/j.jallcom.2014.06.133 ↗