The effect of bismuth oxide polymorph forms on degradation processes in ZnO varistors
Source abstract
Abstract
Abstract The behavior of a ZnO–Bi 2 O 3 binary system and ZnO-based varistors under a biasing electric field and temperature was investigated. Both types of samples were exposed to aging with 50 μA DC at 115 °C for 22 h. The degradation effect of DC biasing was manifested by a drop of varistor voltage as well as the presence of peaks in the thermally stimulated discharge current (TSDC) spectra. It was found that the TSDC generation is related to a particular form of the Bi 2 O 3 in ceramics. Activation energies of the thermally stimulated responses ranged from 0.01 eV to 0.17 eV. In the high temperature range, the peaks attributable to degradation were found in the TSDC current when the Bi-rich inter-granular phase formed agglomerates and the Bi 2 O 3 was in its β- or defective γ- variety. When Bi 2 O 3 was in an α-form, well-crystallized γ-form, or an amorphous form, none of the high temperature TSDC maximums were identified. Under a DC bias, the varistor voltage returned to its starting value when the samples were cooled to room temperature. However, passing the current in the opposite direction by reversing the bias from positive to negative exhibited a persistent drop of the varistor voltage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · ZnO doping and properties · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. A mechanism of degradation in leakage currents through ZnO varistors10.1063/1.330433 ↗
2. Transient Voltage Suppression Devices, Harris Cooperation, USA, (1993), p. 3–3
3. Effect of annealing on the ac leakage components of the ZnO varistor10.1063/1.346766 ↗
4. Electrical conduction of ZnO varistors under continuous DC stress10.1143/JJAP.19.909 ↗
5. Degradation phenomena due to impulse-current in zinc oxide varistors10.1111/j.1151-2916.1995.tb08041.x ↗
6. Effects of thermal treatments on the conductance of tin oxide10.1016/0272-8842(95)00051-8 ↗
7. O wozmoznosti izgotowlenija simietriczeskich varistorov iz okisi cinka c primiestju okosi bizmuta Uczonyje zapiski LGPT im
8. Non-linear electrical properties of zinc oxide ceramics
9. SnO2, ZnO and related polycrystalline compound semiconductors: an overview and review on the voltage-dependent resistance (non-ohmic) feature10.1016/j.jeurceramsoc.2007.06.011 ↗
10. Key role of oxygen at zinc-oxide varistor grain-boundaries10.1063/1.103661 ↗
11. Relationship between grain boundaries and electrical degradation of ZnO varistors10.1002/eej.20493 ↗
12. Study on recovery of electrical degradation of ZnO varistors10.4028/www.scientific.net/KEM.350.209 ↗
13. Effects of annealing on the grain boundary potential barrier of ZnO varistor10.1007/BF02402992 ↗
14. Electrical properties of varistors in relation to their true bismuth composition after sintering10.1016/S0254-0584(99)00227-8 ↗
15. Effects of bismuth sesquioxide on the characteristics of ZnO varistors10.1111/j.1151-2916.1986.tb04774.x ↗
16. Microstucture and crystal structure of bismuth oxide phases in zinc oxide varistor ceramics10.1111/j.1151-2916.1988.tb05915.x ↗
17. Mechanical properties and dimensional effects of ZnO- and SnO2-based varistors
18. M. Nawata, H. Kawamura, M.Ieda, A. Kanematsu, Advances in varistor technology, in: L. Lionel, L.M. Levinson, (Eds.), Proceedings of the 2nd International Varistor Conference, Schenectady N.Y., 1988, Ceramics Transactions. vol. 3, 1989, pp. 186–193.
19. Thermally stimulated currents as measure of degradation of zinc oxide varistors10.1080/10420150215787 ↗
20. Microstructure and crystal phases of prazeodymium in zinc oxide ceramics
21. Kröger S · 1964
22. Oxygen diffusion in Bi2O3-doped ZnO10.1590/S1516-14392008000200019 ↗