The effects of sintering method on crystalline morphology and photoluminescent properties of BaY2ZnO5:Tb3+
Source abstract
Abstract
Abstract This paper describes the effects of microwave assisted sintering on the crystalline morphology and photoluminescent properties of BaY2ZnO5 doped with 4 mol% Tb powder. For comparison, the properties of BaY2ZnO5:Tb powders sintered at 1250 °C in conventional furnace for 12 h were also investigated. X-ray powder diffraction analysis showed the enhanced crystallinity of orthorhombic BaY2ZnO5 without second phase or phases of starting materials as BaY2ZnO5:Tb powders sintered at 1250 °C in microwave furnace for 1 h. In the PL studies, the emission spectra of BaY2ZnO5:Tb powders excited at 237 nm exhibits a maximum peak assigned to 5D4 → 7F5 transition. In addition, the emission intensity of the prepared powder is slightly enhanced, compared to that sintered at 1250 °C/12 h in a conventional sintering furnace.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Microwave Dielectric Ceramics Synthesis · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Efficiency enhancement by aluminum addition to some oxide phosphors for field emission displays10.1016/S0141-9382(00)00034-2 ↗
2. Photoluminescence of phosphors for PDP with VUV excitation10.1016/j.elspec.2005.01.232 ↗
3. Phosphors for plasma display panels10.1016/S0925-8388(00)00856-2 ↗
4. Y3Al5O12:Ce0.05 phosphor coatings on gallium nitride for white light emitting diodes10.1149/1.1535207 ↗
5. Yellow-emitting Sr3SiO5:Ce3+, Li+ phosphor for white-light-emitting diodes and yellow-light-emitting diodes10.1063/1.2432947 ↗
6. Nanocrystalline Y3Al5O12:Ce phosphor-based white light-emitting diodes embedded with CdS:Mn/ZnS core/shell quantum dots10.1016/j.matlet.2008.12.001 ↗
7. Emission color variation of M2SiO4:Eu2+ (M=Ba, Sr, Ca) phosphors for light-emitting diode10.1016/j.ssc.2004.10.017 ↗
8. Direct white light phosphor: a porous zinc Gallophosphate with tunable yellow-to-white luminescence10.1021/ja0512879 ↗
9. Luminescent property of Eu3+ in a new compound, (Sr0.99La1.01)Zn0.99O3.49510.1149/1.1445434 ↗
10. Luminescent properties of Eu3+ in defect apatite, Sr3La6(SiO4)610.1149/1.1483102 ↗
11. High output power InGaN ultraviolet light-emitting diodes fabricated on patterned substrates using metalorganic vapor phase epitaxy10.1002/1521-396X(200111)188:1<121::AID-PSSA121>3.0.CO;2-G ↗
12. Synthesis and photoluminescence characteristics of color-tunable BaY2ZnO5:Eu3+ phosphors10.1063/1.2998299 ↗
13. Microwave processing of materials10.1146/annurev.ms.26.080196.001503 ↗
14. Accelerated sintering and phase transformation of TiO2 in microwave radiation10.1557/JMR.1998.0465 ↗
15. Thermal decomposition characteristics of boehmite gels under microwave heating and associated microstructural features10.1016/S0167-577X(97)00228-0 ↗
16. Sintering and grain growth of 3mol% yttria zirconia in a microwave field10.1007/BF00355903 ↗
17. Microwave processing of ceramics10.1016/S1359-0286(98)80011-9 ↗
18. Use of partially oxidized SiC particle bed for microwave sintering of low loss ceramics10.1016/S0921-5093(99)00017-9 ↗
19. Microwave sintering of (Bi0.75Ca1.2Y1.05)(V0.6Fe4.4)O12 microwave magnetic materials10.1016/S0955-2219(03)00401-1 ↗
20. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
21. Synthesis and luminescent properties of Tb3+-activated yttrium indium germanate phosphor10.1016/j.jssc.2007.07.018 ↗
22. Terbium(III) doped silica-xerogels: effect of aluminium(III) co-doping10.1016/S0022-3093(98)00856-4 ↗