journal article·2019-09

Influences of Ga concentration on performances of CuInGaSe2 cells fabricated by sputtering-based method with ceramic quaternary target

Xunyan Lyu, Daming Zhuang, Ming Zhao, Ning Zhang, Yaowei Wei, Yixuan Wu, Guoan Ren, Chen Wang, Lan Hu, Jinquan Wei, Qianming Gong

Ceramics International· Volume 45· Issue 13
Publisher page

Abstract

Abstract Copper Indium Gallium Selenide (Cu(In,Ga)Se 2 , CIGSe) absorbers with different Ga contents were prepared by sputtering CIGSe ceramic targets and post-annealing. CIGSe solar cell devices were fabricated with other functional layers. The device performances and absorber properties were investigated. Increasing Ga content led to an increase in V OC and a decrease in J SC . Ga was supposed to diffuse towards back contact during the annealing process. The best performance was obtained as the ratio of Ga/(In + Ga) reaches 0.32 with the efficiency of 13.8% and a V OC of 537 mV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Cu2ZnSnSSe4 solar cells with 9.6% efficiency via selenizing Cu-Zn-Sn-S precursor sputtered from a quaternary target10.1016/j.solmat.2017.08.011 ↗
2. Synthesizing three-dimensional ordered macroporous CuInxGa1−x Se2 thin films by template-assisted electrodeposition from modified ionic liquid10.1016/j.ceramint.2017.10.171 ↗
3. Enhancing efficiency of Cu(In,Ga)Se2 solar cells on flexible stainless steel foils using NaF co-evaporation10.1016/j.solener.2013.03.010 ↗
4. Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules10.1109/JPHOTOV.2012.2226869 ↗
5. The effects of selenium content on Cu(InGa)Se2 thin film solar cells by sputtering from quaternary target with Se-free post annealing10.1016/j.vacuum.2016.12.041 ↗
6. Comprehensive characterization of CIGS absorber layers grown by one-step sputtering process10.1016/j.ceramint.2018.11.120 ↗
7. CIGS absorbing layers prepared by RF magnetron sputtering from a single quaternary target10.1016/j.ceramint.2016.06.067 ↗
8. Study on how the content of selenium in the precursors influences the properties of CuInSe2 thin films10.1016/j.apsusc.2017.10.139 ↗
9. CIGS thin films grown by hybrid sputtering-evaporation method: properties and PV performance10.1016/j.solener.2018.02.024 ↗
10. Copper indium gallium selenide based solar cells – a review10.1039/C7EE00826K ↗
11. Effect of growth conditions on microstructure of sputtered precursor for CuIn1-xGaxSe2 (CIGS) absorber layer deposited on stainless steel substrates10.1016/j.tsf.2018.08.045 ↗
12. Effect of Cu content on the photovoltaic properties of wide bandgap CIGS thin-film solar cells prepared by single-stage process10.1016/j.cap.2016.08.019 ↗
13. A challenge for x-ray photoelectron spectroscopy characterization of Cu(In,Ga)Se2 absorbers: the accurate quantification of Ga/(Ga + In) ratio10.1016/j.tsf.2018.11.029 ↗
14. Effects of Ga concentration on structural and electrical properties of screen printed-CIGS absorber layers on polyethylene terephthalate10.1016/j.mssp.2012.03.002 ↗
15. Effect of the absorber layer band-gap on CIGS solar cell10.1016/j.cjph.2017.01.011 ↗
16. Rear interface modification for efficient Cu(In,Ga)Se2 solar cells processed with metallic precursors and low-cost Se vapor10.1016/j.solmat.2018.06.052 ↗
17. Growth and characterization of CIGS thin films by plasma-assisted and thermal-assisted Se vapor selenization process10.1016/j.jallcom.2017.01.201 ↗
18. Bandgap engineering of Cu(In1-xGax)Se2 absorber layers fabricated using CuInSe2 and CuGaSe2 targets for one-step sputtering process10.1364/OME.6.003541 ↗
19. Effect of Ga introduction during the second stage of a coevaporation process of Cu(In,Ga)Se2 layers at low temperature on polyimide substrates10.1016/j.tsf.2018.11.037 ↗
20. Surface evolution of sputtered Cu(In,Ga)Se2 thin films under various annealing temperatures10.1007/s10854-015-2991-6 ↗
21. Copper content dependence of electrical properties and Raman spectra of Se-deficient Cu(In,Ga)Se2 thin films for solar cells10.1007/s10854-016-4947-x ↗
22. Characterization of Cu(In,Ga)Se2 (CIGS) films with varying gallium ratios10.1016/j.jallcom.2015.09.006 ↗
23. Sulfurization of Co-evaporated Cu(in,Ga)Se2 as a postdeposition treatment10.1109/JPHOTOV.2018.2793759 ↗