Experimental characterization of failure behaviour for three-dimensional woven carbon/carbon composites under pin-loading
Source abstract
Abstract
Abstract An experimental approach of three-dimensional woven carbon/carbon composites arranged in various geometrical configuration is presented in this paper. Seven types of samples divided into three groups were tested under pin-loading to determine the effects of width-to-hole diameter ratio (W/D), edge distance -to- hole diameter ratio (E/D) and hole diameter-to- thickness ratio (D/t) on the failure mode. For an advanced understanding of failure propagation, damage mechanism was observed and assessed combining acoustic emission monitoring. The experimental results and observations indicated that net-tension failure and shearing-out failure switched to bearing failure with the increasing ratio of W/D and E/D, respectively. while D/t hardly affected the failure mode. Major features of the damage mechanisms included matrix crashing and cracking, fiber micro-buckling and bending, interface debonding and fiber breakage with different acoustic emission signal ranges.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A review of input data and modelling assumptions in longitudinal strength models for unidirectional fibre-reinforced composites10.1016/j.compstruct.2016.05.002 ↗
2. High performance carbon fibre reinforced epoxy composites with controllable stiffness10.1016/j.compscitech.2014.09.008 ↗
3. Secondary bending effects in progressively damaged single-lap, single-bolt composite joints10.1016/j.rinp.2016.08.021 ↗
4. An experimental study on the bearing strength behavior of Al2O3 particle filled glass fiber reinforced epoxy composites pinned joints10.1016/j.compstruct.2009.08.014 ↗
5. On the prediction of bolted single-lap composite joints10.1016/j.compstruct.2012.01.016 ↗
6. Bearing strength and failure behavior of bolted composite joints (part I: experimental investigation)10.1016/j.compscitech.2005.02.011 ↗
7. Progressive failure analysis of 2D woven composites at the meso-micro scale10.1016/j.compstruct.2017.07.023 ↗
8. Experimental and numerical investigation on mechanical behaviors of woven fabric composites under off-axial loading10.1016/j.ijmecsci.2018.03.030 ↗
9. Multiscale model of woven ceramic matrix composites considering manufacturing induced damage10.1016/j.compstruct.2015.02.015 ↗
10. Review of applications for advanced three-dimensional fibre textile composites10.1016/S1359-835X(99)00034-2 ↗
11. Multi-scale modeling, stress and failure analyses of 3-D woven composites10.1007/s10853-006-0197-2 ↗
12. Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension10.1016/j.compositesa.2014.01.003 ↗
13. Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending10.1016/j.compstruct.2016.01.100 ↗
14. Transverse impact behavior and energy absorption of three-dimensional orthogonal hybrid woven composites10.1016/j.compstruct.2006.08.011 ↗
15. Effect of off-axis angle on low-velocity impact and compression after impact damage mechanisms of 3D woven composites10.1016/j.matdes.2020.108672 ↗
16. The strength of bolted joints in multi-directional CFRP laminates10.1016/0010-4361(77)90027-1 ↗
17. Failure analysis of woven laminated glass–vinylester composites with pin-loaded hole10.1016/j.compstruct.2004.10.009 ↗
18. Failure Analysis of two-dimensional carbon-epoxy composite plate pinned joint10.1080/107594199305502 ↗
19. Notched and pin bearing strengths of GFRP composite laminates10.1177/002199839603001805 ↗
20. Failure mechanisms in bolted CFRP10.1177/073168449801700302 ↗
21. On the bearing strength of bolted graphite/epoxy laminates10.1177/002199839002401201 ↗
22. Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints10.1016/S0266-3538(02)00088-X ↗
23. An experimental study of bolt–hole clearance effects in single-lap, multibolt composite joints10.1177/0021998305048157 ↗
24. Behavior of three-dimensional woven carbon composites in single-bolt bearing10.1016/j.compstruct.2015.03.022 ↗
25. Buckley · 1993
26. Fatigue damage characterization in plain-weave carbon-carbon fabric reinforced plastic composites10.1177/073168449801701501 ↗
27. Elastic modulus of 3D carbon/carbon composite using image-based finite element simulations and experiments10.1016/j.compstruct.2012.11.019 ↗
28. Failure behavior investigation of a unidirectional carbon–carbon composite10.1016/j.matdes.2013.10.058 ↗
29. ASTM Standard D5961 · 2010
30. Experiments and modeling of clamping effects on the bearing strength of mechanically fastened joints in CFRP laminates
31. Application of three-dimensionally reinforced carbon–carbon composites to dovetail joint structures10.1016/S0266-3538(02)00157-4 ↗
32. Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emission10.1016/j.compscitech.2005.07.013 ↗
33. Acoustic emission characteristics of micro-failure processes in polymer blends and composites10.1016/S0266-3538(00)00060-9 ↗
34. Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites10.1016/0266-3538(95)00121-2 ↗