journal article·2011-08

Formation and characterization of porous spherical biphasic calcium phosphate (BCP) granules using PCL

Do-Van Tuyen, Byong-Taek Lee

Ceramics International· Volume 37· Issue 6
Publisher page

Abstract

Abstract We developed a process to fabricate porous spherical BCP granules using different volumetric ratios of polycaprolactone (PCL). This technique takes advantage of the formation of spherical drop shapes that occur for any liquid. The method to produce porous granules is based on the liquid immiscibility effect of a PCL solution and distilled water. Granules were sintered at 1300 °C and 1400 °C using conventional and microwave sintering techniques. Using this approach, the granules showed a good pore-interconnected relation and granules with a porosity that ranged from 36.12% to 59.8%, inner pore sizes that ranged from 30 μm to 250 μm, and a granular size of about 1.5 mm could be obtained. Granules were characterized for microstructure, phase composition and porosity. Using this novel approach, we were able to achieve desirable porous characteristics that simulate natural bone structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Calcium Carbonate Crystallization and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. The art of writing a scientific article
2. Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering10.1016/j.biomaterials.2003.12.023 ↗
3. Fabrication and cellular biocompatibility of porous carbonated biphasic calcium phosphate ceramics with a nanostructure10.1016/j.actbio.2008.07.035 ↗
4. Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering10.1016/j.addr.2007.03.011 ↗
5. Replacement of the rabbit medial meniscus with a polyester–carbon fibre bioprosthesis10.1016/0142-9612(90)90045-R ↗
6. Hench · Bioceram. J. Am. Ceram. Soc. · 1998 · 81 · 170510.1111/j.1151-2916.1998.tb02540.x ↗
7. Bioceramics consisting of calcium phosphate salts10.1016/0142-9612(80)90059-9 ↗
8. Granules of osteoapatite and glass-reinforced. hydroxyapatite implanted in rabbit tibiae
9. A comparison of the osteoinductive potential of two calcium phosphate ceramics implanted intramuscularly in goats10.1023/A:1021191432366 ↗
10. Zhang · 2000
11. Effect of surface structure on protein adsorption to biphasic calcium-phosphate ceramics in vitro and in vivo10.1016/j.actbio.2008.11.024 ↗
12. Fabrication and characterization of porous hydroxyapatite/β-tricalcium phosphate ceramics by microwave sintering10.1016/j.matlet.2005.09.010 ↗
13. A new injectable bone substitute combining poly(ɛ-caprolactone) microparticles with biphasic calcium phosphate granules10.1016/S0142-9612(01)00022-9 ↗
14. A method to fabricate porous spherical hydroxyapatite granules intended for time-controlled drug release10.1016/S0142-9612(02)00049-2 ↗
15. Bioceramics; from concept to clinic10.1111/j.1151-2916.1991.tb07132.x ↗
16. Biodegradable drug delivery system for the treatment of bone infection and repair10.1023/A:1008995926566 ↗
17. Sugar cross-linked gelatin for controlled release: microspheres and disks10.1016/S0142-9612(98)00034-9 ↗
18. Development of porous spherical hydroxyapatite granules: application towards protein delivery10.1023/A:1008918412198 ↗
19. Porous spherical hydroxyapatite and fluorhydroxyapatite granules: processing and characterization10.1016/j.stam.2003.11.007 ↗
20. Bone formation process in porous calcium carbonate and hydroxyapatite10.1002/jbm.820260705 ↗
21. Calvarial bone response to a tricalcium phosphate-genipin crosslinked gelatin composite10.1016/j.biomaterials.2004.09.011 ↗
22. Fabrication and characterization of porous hydroxyapatite granules10.1016/0142-9612(95)00301-0 ↗
23. Miscibility, viscosity and density of poly(e-caprolactone) in acetone+carbon dioxide binary fluid mixtures10.1016/j.supflu.2006.03.026 ↗
24. The computer aided manufacture of ceramics using multilayer jet printing10.1007/BF00455415 ↗
25. Ink jet printing of PZT aqueous ceramic suspensions10.1023/A:1006689713205 ↗
26. In situ synthesis of spherical BCP nanopowders by microwave assisted process10.1016/j.matchemphys.2007.02.009 ↗
27. Fabrication of porous hydroxyapatite ceramics by microwave sintering method