journal article·2013-07

Novel high-strength NiCuCoTiTa alloy with plasticity

Sumanta Samal, Krishanu Biswas

Journal of Nanoparticle Research· Volume 15· Issue 7
Publisher page

Abstract

The present investigation reports a novel Ni–Ti-based Ni48Cu10Co2Ti38Ta2 alloy, obtained by arc melting cum suction casting route under ultrahigh-purity Ar atmosphere. X-ray diffractometer, scanning electron microscopy, and transmission electron microscopy (TEM) investigations reveal a microstructure consisting of nanostructured eutectic between cubic NiTi and hexagonal Ni3Ti with micron-scale NiTi and cubic Ti2Ni dendrites. Detailed TEM investigation indicates substantial reduction in the interlamellar spacing as the alloy chemistry changes from binary to quinary. The alloy shows a high compressive strength, 2 GPa, with high plasticity 13 %. Fractography surface of this new alloy reveals mixed mode of fracture. The results are discussed in light of the available literature on deformation of nanostructured eutectic with micron-sized dendrites in the microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Cahn RW, Haasen P (1996) Physical metallurgy. North-Holland, Amsterdam
2. Chatterjee S, Abinandanan TA, Chattopadhyay K (2008) Phase formation in Ti/Ni dissimilar welds. Mater Sci Eng A 490:7–1510.1016/j.msea.2007.12.041 ↗
3. Das J, Güth A, Klauß HJ, Mickel C, Löser W, Eckert J, Roy SK, Schultz L (2003) Effect of casting conditions on microstructure and mechanical properties of high-strength Zr73.5Nb9Cu7Ni1Al9.5 in situ composites. Scr Mater 49:1189–119510.1016/j.scriptamat.2003.08.015 ↗
4. Eckert J, Kuhn U, Mattern N, He G, Gebert A (2002) Structural bulk metallic glasses with different length-scale of constituent phases. Intermetallics 10:1183–119010.1016/S0966-9795(02)00133-4 ↗
5. Elliott R (1983) Eutectic solidification processing: crystalline and glassy alloys. Butterworths, London10.1016/B978-0-408-10714-3.50007-1 ↗
6. Fan C, Ott RT, Hufnagel TC (2002) Metallic glass matrix composite with precipitated ductile reinforcement. Appl Phys Lett 81:1020–102210.1063/1.1498864 ↗
7. Hays CC, Kim CP, Johnson WL (2000) Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Phys Rev Lett 84:2901–290410.1103/PhysRevLett.84.2901 ↗
8. He G, Hagiwara M (2004) Ti-Cu-Ni(Fe, Cr, Co)-Sn-Ta(Nb) alloys with potential for biomedical applications. Trans Jpn Inst Metals 45:1120–1123
9. He G, Eckert J, Löser W, Schultz L (2003a) Novel Ti-base nanostructure–dendrite composite with enhanced plasticity. Nat Mater 2:33–3710.1038/nmat792 ↗
10. He G, Löser W, Eckert J (2003b) In situ formed Ti–Cu–Ni–Sn–Ta nanostructure-dendrite composite with large plasticity. Acta Mater 51:5223–523410.1016/S1359-6454(03)00386-0 ↗
11. He G, Eckert J, Löser W, Hagiwara M (2004) Composition dependence of the microstructure and the mechanical properties of nano/ultrafine-structured Ti–Cu–Ni–Sn–Nb alloys. Acta Mater 52:3035–304610.1016/j.actamat.2004.03.006 ↗
12. Kim KB, Das J, Xu W, Zhang ZF, Eckert J (2006) Microscopic deformation mechanism of a Ti66.1Nb13.9Ni4.8Cu8Sn7.2 nanostructure–dendrite composite. Acta Mater 54:3701–371110.1016/j.actamat.2006.04.006 ↗
13. Kim KB, Das J, Baier F, Eckert J (2007) Microstructural investigation of a deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure–dendrite composite. J Alloy Compd 434–435:106–16910.1016/j.jallcom.2006.08.133 ↗
14. Kuhn U, Eckert J, Mattern N, Schultz L (2002) ZrNbCuNiAl bulk metallic glass matrix composites containing dendritic bcc phase precipitates. Appl Phys Lett 80:2478–248010.1063/1.1467707 ↗
15. Lee JK, Bae DH, Yi S, Kim WT, Kim DH (2004) Effects of Sn addition on glass forming ability and crystallization behavior in Ni–Zr–Ti–Si alloys. J Non-Cryst Solids 333:212–22010.1016/j.jnoncrysol.2003.10.011 ↗
16. Leonhard A, Xing LQ, Heilmaier M, Gebert A, Eckert J, Schultz L (1998) Effect of crystalline precipitations on the mechanical behavior of bulk glass forming Zr-based alloys. Nanostruct Mater 10:805–81710.1016/S0965-9773(98)00117-2 ↗
17. Louzguine DV, Kato H, Inoue A (2004) High-strength hypereutectic Ti–Fe–Co bulk alloy with good ductility. Philos Mag Lett 84:359–36410.1080/09500830410001728336 ↗
18. Ma E (2003) Nanocrystalline materials: controlling plastic instability. Nat Mater 2:7–810.1038/nmat797 ↗
19. Massalski TB (1990) Binary alloy phase diagrams, 2nd edn. ASM International, Metals Park, OH
20. Mondal B, Samal S, Biswas K, Govind (2011) Development of ultrafine Ti–Fe–Sn in situ composite with enhanced plasticity. IOP Conf Ser Mater Sci Engineering 27:012025–012031. doi: 10.1088/1757-899X/27/1/01202510.1088/1757-899X/27/1/012025 ↗
21. Otsuka K, Ren X (2005) Physical metallurgy of Ti–Ni-based shape memory alloys. Prog Mater Sci 50:511–67810.1016/j.pmatsci.2004.10.001 ↗
22. Park JM, Sohn SW, Kim TE, Kim KB, Kim WT, Kim DH (2007) Nanostructure–dendrite composites in the Fe–Zr binary alloy system exhibiting high strength and plasticity. Scr Mater 57:1153–115610.1016/j.scriptamat.2007.08.004 ↗
23. Park JM, Mattern N, Kuhn U, Eckert J, Kim KB, Kim WT, Chattopadhyaya K, Kim DH (2009) High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity. J Mater Res 24:2605–260910.1557/jmr.2009.0297 ↗
24. Samal S, Biswas K (2013) Phase transformation behaviour of Ni–Ti-based multicomponent alloys, communicated
25. Samal S, Mondal B, Biswas K, Govind (2012) Electron microscopic study on the suction cast in situ Ti–Fe–Sn ultrafine composites. Metall Mater Trans A 44:427–439. doi: 10.1007/s11661-012-1404-110.1007/s11661-012-1404-1 ↗
26. Srivastava RM, Eckert J, Loser W, Dhindaw BK, Schultz L (2002) Cooling rate evaluation for bulk amorphous alloys from eutectic microstructures in casting process. Mater Trans, JIM 43:1670–167510.2320/matertrans.43.1670 ↗
27. Sun BB, Sui ML, Wang YM, He G, Eckert J, Ma E (2006) Ultrafine composite microstructure in a bulk Ti alloy for high strength, strain hardening and tensile ductility. Acta Mater 54:1349–135710.1016/j.actamat.2005.11.011 ↗
28. Szuecs F, Kim CP, Johnson WL (2001) Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallics glass composite. Acta Mater 49:1507–151310.1016/S1359-6454(01)00068-4 ↗
29. Underwood EE (1970) Quantitative stereology, 1st edn. Addison-Wesley, Boston, MA
30. Wang Y, Chen M, Zhou F, Ma E (2002) High tensile ductility in a nanostructured metal. Nature 419:912–91510.1038/nature01133 ↗
31. Xu D, Duan G, Johnson WL, Garland C (2004) Formation and properties of new Ni-based amorphous alloys with critical casting thickness up to 5 mm. Acta Mater 52:3493–349710.1016/j.actamat.2004.04.001 ↗
32. Yi S, Lee YK, Kim WK, Kim DH (2001) Ni-based bulk amorphous alloys in Ni–Ti–Zr–Si system. J Non-Cryst Solids 291:132–13610.1016/S0022-3093(01)00801-8 ↗