journal article·2015-11

Spherical indentation with multiple partial unloading for assessing the mechanical properties of ZrB2–SiC composites

Q.Q. Huang, Y. Song, W.W. Liu, Y. Chen, F. Qi, D. Zhao, Y.G. Wang

Ceramics International· Volume 41· Issue 9
Publisher page

Abstract

In this research, spherical instrumented micro-indentation tests with multiple partial unloading were performed to determine the mechanical properties of the ZrB2–SiC composites reinforced with and without the mixture of boron nitride nanotubes (BNNTs) and boron nitride nanoplatelets (BNNPs), the indentation stress–strain curves of these ZrB2–SiC composites were also reconstructed. Results showed that strain-hardening exponents of the sintered ZrB2–SiC composites are in the range of ~0.50 to ~0.52, and the added mixture of BNNTs–BNNPs has little effect on the indentation yield strength of the composites. Synergetic influences of the Orowan-type strengthening effect and the capability of large plastic deformation associated with the added BNNPs might be ascribed to the neglectable changes in the strain-hardening exponent and the indentation yield strength of the (BNNT–BNNP)/(ZrB2–SiC) composites. This research is expected to facilitate a better understanding of the microscopic plastic deformation behavior of ZrB2 and its composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Densification of ZrB2-based composites and their mechanical and physical properties: a review10.1016/j.jeurceramsoc.2008.11.008 ↗
2. Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic10.1016/j.scriptamat.2009.05.041 ↗
3. Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2–SiC matrix ultrahigh temperature ceramics10.1016/j.jallcom.2009.04.109 ↗
4. Tough hybrid ceramic-based material with high strength10.1016/j.scriptamat.2012.07.042 ↗
5. Effect of graphite flake on the mechanical properties of hot pressed ZrB2–SiC ceramics10.1016/j.matlet.2008.07.027 ↗
6. Mechanical properties and thermal shock resistance of ZrB2–SiC ceramic toughened with graphite flake and SiC whiskers10.1016/j.scriptamat.2009.07.001 ↗
7. Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite10.1016/j.matchemphys.2009.03.033 ↗
8. Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites10.1016/j.jallcom.2008.04.092 ↗
9. Effect of carbon nanotubes on the properties of ZrB2–SiC ceramics10.1016/j.msea.2007.11.027 ↗
10. Purification of single-Wall carbon nanotubes by heat treatment and supercritical extraction10.1590/S1516-14392011005000051 ↗
11. Boron nitride nanotubes: pronounced resistance to oxidation10.1063/1.1667278 ↗
12. Fracture toughness and toughening mechanisms in a (ZrB2–SiC) composite reinforced with boronnitride nanotubes and boron nitride nanoplatelets10.1016/j.scriptamat.2012.12.005 ↗
13. Nanoindentation initiated dislocation in barium titanate (BaTi3)10.1063/1.2766846 ↗
14. Room-temperature dislocation activity during mechanical deformation of polycrystalline ultra-high-temperature ceramics10.1016/j.scriptamat.2009.08.038 ↗
15. Determination of post-yield hardening response in a ZrB2 ceramic10.1016/j.scriptamat.2011.08.020 ↗
16. Determination of mechanical properties by instrumented indentation10.1007/s11012-006-9018-6 ↗
17. A simple predictive model for spherical indentation10.1557/JMR.1993.0297 ↗
18. Determining the mechanical properties of small volumes of material from submicrometer spherical indentations10.1557/JMR.1995.0101 ↗
19. Hill · J. Mech. Phys. Solids · 1987 · 35 · 56510.1016/0022-5096(87)90017-2 ↗
20. A therorectical-study of the brinell hardness test10.1098/rspa.1989.0056 ↗
21. Depth-sensing indentation for assessing the mechanical properties of cold-sprayed Ta10.1016/j.surfcoat.2010.08.146 ↗
22. Integrated characterization of cold sprayed aluminum coatings10.1016/j.actamat.2006.09.006 ↗
23. An elastic–plastic indentation model and its solutions10.1557/JMR.1996.0299 ↗
24. Measurement of the elastic modulus of a multi-wall boron nitride nanotube10.1016/S0038-1098(97)10125-9 ↗
25. Thermal-conductivity and tensile-properties of BN, SiC and Ge nanotubes10.1016/j.commatsci.2009.05.027 ↗
26. Young׳s modulus, density and phase composition of pressureless sintered self-sealed Si3N4/BN laminated structures10.1016/j.jeurceramsoc.2007.11.020 ↗
27. Laminated ZrB2–SiC ceramic with improved strength and toughness10.1016/j.scriptamat.2010.10.005 ↗
28. Prediction of fracture strength in Al2O3/SiCp ceramic matrix nanocomposites10.1016/j.stam.2007.01.001 ↗
29. Do thermal residual stresses contribute to the improved fracture toughness of carbon nanotube/alumina nanocomposites10.1016/j.scriptamat.2011.11.026 ↗
30. Electronic structure, bonding, and ground-state properties of AlB2-type transition-metal diborides10.1103/PhysRevB.63.045115 ↗
31. Electronic structure, elasticity and hardness of diborides of zirconium and hafnium: first principles calculations10.1016/j.commatsci.2008.04.002 ↗