journal article·2022-01

Sodium niobates and protonic niobates nanowires obtained from hydrothermal synthesis: Electrochemical behavior in aqueous electrolyte

Adilar Gonçalves dos Santos Júnior, Leonardo Marasca Antonini, Edna Jerusa Pacheco Sampaio, Antonio Marcos Helgueira de Andrade, Cesar Aguzzoli, Célia de Fraga Malfatti

Ceramics International· Volume 48· Issue 2
Publisher page

Abstract

Abstract Niobium-based oxides can be used in several applications due to a diverse set of properties. In this work, Na2Nb2O6.H2O sodium niobate nanowires were obtained by hydrothermal synthesis at low temperature. Dehydrated sodium niobate (Na2Nb2O6) and sodium niobate with perovskite structure (NaNbO3) were obtained by submitting Na2Nb2O6.H2O to heat treatment (350 °C and 500 °C, respectively). To obtain protonic niobates, sodium niobates were immersed in nitric acid in order to promote ion exchange reactions. From this procedure, protonic niobates (H3O)2Nb2O6.H2O and (H3O)2Nb2O6 were obtained. The sample NaNbO3 did not undergo any transformation. Cyclic voltammetry tests carried out in a neutral aqueous solution 1 M Na2SO4 showed a wide potential window for both niobates (sodium and protonic). However, the protonic niobate samples (H3O)2Nb2O6.H2O and (H3O)2Nb2O6 presented much higher current density values than the sodium niobates. This result can be related to a structural rearrangement that allowed a significant increase in the intercalation of sodium Na + ions from the electrolyte into the structure of these protonic niobates, when polarized. Therefore, in this work, it was demonstrated that it is possible to obtain protonic niobates from sodium niobates, as well as, it was verified the distinct electrochemical behavior between these materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Niobium oxides and niobates physical properties: Review and prospects10.1016/j.pmatsci.2016.02.001 ↗
2. Recent advances in nanostructured Nb-based oxides for electrochemical energy storage10.1039/C6NR01340F ↗
3. Hydrogen photochromism in Nb2O5 powders10.1039/C4CP02834A ↗
4. Nanostructured Nb2O5 catalysts10.3402/nano.v3i0.17631 ↗
5. Fast and highly-sensitive hydrogen sensing of Nb2O5 nanowires at room temperature10.1016/j.ijhydene.2011.12.004 ↗
6. Osteogenic differentiation of bone marrow-derived mesenchymal stem cells on anodized niobium surface10.1007/s10856-019-6305-z ↗
7. Giant piezoelectricity in oxide thin films with nanopillar structure10.1126/science.abb3209 ↗
8. Effect of synthesis conditions on crystal morphology and layer thickness of nanostructured sodium niobate supported on metallic substrate
9. Facile synthesis of Nb2O5 nanorod array films and their electrochemical properties10.1016/j.apsusc.2011.07.001 ↗
10. Synthesis of self-ordered and well-aligned Nb2O5 nanotubes10.1039/C4CE01540A ↗
11. Quasi‐Aligned Ag–Nb2O5 nanobelt arrays with enhanced photocatalytic and antibacterial activities10.1111/j.1551-2916.2010.04370.x ↗
12. Fabrication of Nb2O5 nanosheets for high-rate lithium ion storage applications10.1038/srep08326 ↗
13. Surface sprouting growth of Na2Nb2O6·H2O nanowires and fabrication of NaNbO3 nanostructures with controlled morphologies10.1016/j.apsusc.2011.08.133 ↗
14. Nb2O5 hollow nanospheres as anode material for enhanced performance in lithium ion batteries10.1016/j.materresbull.2012.06.004 ↗
15. Prototype sandia octahedral molecular sieve (SOMS) Na2Nb2O6·H2O: synthesis, structure and thermodynamic stability10.1021/cm035066i ↗
16. Synthesis, structure, and piezoelectric properties of ferroelectric and antiferroelectric NaNbO3 nanostructures10.1039/C4CE01116C ↗
17. In situ precursor-template route to semi-ordered NaNbO3 nanobelt arrays
18. In situ observation of dehydration-induced phase transformation from Na2Nb2O6–H2O to NaNbO310.1021/jp308289r ↗
19. In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies10.1016/j.actbio.2008.04.005 ↗
20. H3ONb3O8 and HNb3O8: new protonic oxides with a layer structure involving ion exchange properties10.1016/0025-5408(85)90123-0 ↗
21. Wire structure and morphology transformation of niobium oxide and niobates by molten salt synthesis10.1021/cm802776g ↗
22. Synthesis of mesoporous niobium nitride nanobelt arrays and their capacitive properties10.1016/j.apsusc.2016.04.173 ↗
23. New cubic perovskites prepared from LiNbO3 and LiTaO3 via ion exchange10.1016/0022-4596(82)90150-5 ↗
24. Capacitance response in an aqueous electrolyte of Nb2O5 nanochannel layers anodically grown in pure molten o-H3PO410.1016/j.electacta.2018.06.014 ↗
25. A highly sensitive enzyme-amplified immunosensor based on a nanoporous niobium oxide (Nb2O5) electrode10.3390/s100505160 ↗
26. On-chip sensor solution for hydrogen gas detection with the anodic niobium-oxide nanorod arrays10.1016/j.snb.2019.01.009 ↗
27. Apatite-forming ability of niobium oxide gels in a simulated body fluid10.2109/jcersj.109.1275_929 ↗
28. Flow stress of commercially pure niobium over a broad range of temperatures and strain rates10.1016/S0921-5093(00)00740-1 ↗
29. Synthesis of nanoparticles via solvothermal and hydrothermal methods
30. Electrochemical and corrosion characterization of TiO2-RuO2/Ti electrodes modified with WO310.1007/s12678-019-00537-2 ↗
31. Takeno · 2005
32. Corrosion of niobium in sulphuric and hydrochloric acid solutions at 75 and 95°C10.1016/j.corsci.2006.05.028 ↗
33. New insights into the operating voltage of aqueous supercapacitors10.1002/chem.201704420 ↗