journal article·2012-01

Microstructure and electrical properties of BaTiO3/Cu ceramic composite sintered in nitrogen atmosphere

Ning Xu, Yong-Ping Pu, Bo Wang, Hai-Dong Wu, Kai Chen

Publisher page

Abstract

Abstract BaTiO3/xCu composite ceramics with x = 0–30 wt.% were fabricated by the traditional mixing oxide method and their microstructure, relative density, electric conductivity, permittivity and dielectric loss were measured as a function of the Cu mass fraction. The X-ray diffraction (XRD) patterns indicated that the dense composite has no chemical reaction between BaTiO3 and Cu during sintering, and the relative diffraction intensity of Cu increased with the increase of Cu. The electric properties showed that the percolation threshold of BaTiO3/Cu composites was x = 0.25 and its conductivity increased as the Cu content increased after that. With increasing Cu content up to 30 wt.%, the permittivity (ɛr) markedly increased from ∼3000 for monolithic BaTiO3 to ∼8000 at 1 kHz. Additionally, the temperature coefficient of this system was less than 5% in the temperature range of 25–115°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Characterization of barium titanate–silver composites, Part I: Microstructure and mechanical properties10.1007/s10853-005-5163-x ↗
2. Electrical and mechanical properties of piezoelectric ceramic/metal composites in the Pb(Zr,Ti)O3/Pt system
3. Percolative BaTiO3–Ni composite nanopowders from alkoxide-mediated synthesis10.1016/j.jeurceramsoc.2009.06.024 ↗
4. Study of Cr/PTC ceramics composite
5. Frequency dependence of dielectric properties of metallodielectric SrTiO3–Pt composites10.1016/j.jeurceramsoc.2006.11.052 ↗
6. Experimental evidence a giant capacitance in insulator–conductor composites at percolation threshold10.1002/(SICI)1521-4095(200002)12:4<294::AID-ADMA294>3.0.CO;2-D ↗
7. Apercolative ferroelectric metal composite with hybrid dielectric dependence10.1016/j.scriptamat.2007.07.020 ↗
8. Wet processing and characterization of ZrO2/stainless steel composites: electrical and mechanical performance10.1590/S1516-14392001000300013 ↗
9. Electromagnetic properties of composites containing elongated conducting inclusions10.1103/PhysRevB.53.6318 ↗
10. Effect of sintering temperature on the secondary abnormal grain growth of BaTiO310.1016/S0955-2219(99)00197-1 ↗
11. Physics of inhomogeneous inorganic materials10.1016/0079-6425(93)90004-5 ↗
12. Electrical behaviour of attritor processed Al/PMMS composite10.1016/S0921-5107(96)01897-1 ↗
13. Dielectric properties of epoxy-barium titanate–carbon black composites
14. New pereolative BaTiO3–Ni composites with a high and frequency-independent dielectric constant (80000)10.1002/1521-4095(200110)13:20<1541::AID-ADMA1541>3.0.CO;2-X ↗
15. Bingchen · 2003