journal article·2015-08

Improving the electrical properties of niobium-doped titania sputtering targets by sintering in oxygen-deficient atmospheres

Ming-Wei Wu, Ching-Huai Chang, Yan-Chi Chen

Ceramics International· Volume 41· Issue 7
Publisher page

Abstract

Abstract Niobium-doped titania (TNO) film can be used as a transparent conductive oxide (TCO) film due to its excellent conductivity and visible transparency. The performances of TNO sputtering targets are thus critical issues in optimizing sputtered films. This study clarifies the influences of inert and reducing atmospheres on the microstructure, densification, crystal structure, and electrical properties of TNO sputtering targets. The results indicate that a sintering atmosphere of 90% Ar–10% H 2 can result in a lower sintered density, larger grain size, and lower resistivity than can an atmosphere of Ar, followed by one of air. Sintering in 90% Ar–10% H 2 or Ar obviously decreases the resistivity of TiO 2 , from >10 8 Ω cm to −1 Ω cm, and the TNO target, from >10 1 Ω cm to −1 Ω cm. The resistivity of TNO target sintered at 1200 °C in 90% Ar–10% H 2 is as low as 1.8×10 −2 Ω cm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Electronic and Structural Properties of Oxides · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. A transparent metal: Nb-doped anatase TiO210.1063/1.1949728 ↗
2. Transparent conducting oxide films of heavily Nb-doped titania by reactive co-sputtering10.1016/j.jallcom.2011.08.020 ↗
3. Transparent and conducting TiO2:Nb films made by sputter deposition: application to spectrally selective solar reflectors10.1016/j.solmat.2009.02.023 ↗
4. Transparent conducting Nb-doped anatase TiO2 (TNO) thin films sputtered from various oxide targets10.1016/j.tsf.2009.07.205 ↗
5. Investigation on the electrical properties and inhomogeneous distribution of ZnO:Al thin films prepared by DC magnetron sputtering at low deposition temperature10.1063/1.2407265 ↗
6. Room-temperature deposition of transparent conducting Al-doped ZnO10.1016/j.apsusc.2008.12.021 ↗
7. Effect of target properties on transparent conducting impurity-doped ZnO thin films deposited by DC magnetron sputtering10.1016/j.tsf.2010.08.007 ↗
8. Highly conductive alumina-added ZnO ceramic target prepared by reduction sintering and its effects on the properties of deposited thin films by direct current magnetron sputtering10.1016/j.tsf.2010.06.004 ↗
9. High rate deposition of TiO2 by DC sputtering of the TiO2−x target10.1016/S0040-6090(01)01023-9 ↗
10. Transparent conductive Nb-doped TiO2 films deposited by direct-current magnetron sputtering using a TiO2−x target10.1016/j.tsf.2007.10.047 ↗
11. The densification, microstructure, and electrical properties of aluminum-doped zinc oxide sputtering target for transparent conductive oxide film10.1016/j.jeurceramsoc.2012.04.030 ↗
12. The sintering behavior, microstructure, and electrical properties of gallium-doped zinc oxide ceramic targets10.1016/j.jeurceramsoc.2014.05.022 ↗
13. Colloidal dispersion of nano-scale ZnO powders using amphibious and anionic polyelectrolytes10.1016/j.ceramint.2008.05.014 ↗
14. Sintering behavior of nano- and micro-sized ZnO powder targets for rf magnetron sputtering applications10.1111/j.1551-2916.2011.04874.x ↗
15. The sintering trajectory and electrical properties of niobium-doped titania sputtering targets10.1111/jace.13271 ↗
16. Intrinsic defects on a TiO2 (110) (1×1) surface and their reaction with oxygen: a scanning tunneling microscopy study10.1016/S0039-6028(98)00356-2 ↗
17. Activation of room-temperature ferromagnetism in nonstoichiometric TiO2−δ powders by oxygen vacancies10.1063/1.2999501 ↗
18. Efficient suppression of electron-hole recombination in oxygen-deficient hydrogen-treated TiO2 nanowires for photoelectrochemical water splitting10.1021/jp4099914 ↗
19. Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting10.1021/nl201766h ↗
20. Oxygen-deficient TiO2−δ nanoparticles via hydrogen reduction for high rate capability lithium batteries10.1021/cm2031009 ↗
21. Reduction extraction kinetics of titania and iron from an ilmenite by H2–Ar gas mixtures10.2355/isijinternational.49.164 ↗
22. Ambient effects on electric-field-induced local charge modification of TiO210.1063/1.3675630 ↗
23. Average grain size in polycrystalline ceramics10.1111/j.1151-2916.1969.tb11975.x ↗
24. Effect of sintering on microstructure of TiO2 ceramics10.1179/174367607X155981 ↗
25. Effect of sintering atmosphere on the densification behavior of hot pressed TiN ceramics10.1016/j.ceramint.2013.03.062 ↗