Facile modified synthesis and intermediate temperature electrical properties of Sn0.95Al0.05P2O7/KSn2(PO4)3 composite electrolyte
Source abstract
Abstract
Abstract In this study, Sn 0.95 Al 0.05 P 2 O 7 and a novel dense Sn 0.95 Al 0.05 P 2 O 7 /KSn 2 (PO 4 ) 3 composite electrolytes were synthesized. The structural characterization of X–ray diffraction (XRD) and microstructual properties of scanning electron microscopy (SEM) were carried out. The XRD results indicated that an in-situ reaction between Sn 0.95 Al 0.05 P 2 O 7 and inorganic melt salt take place to form the Sn 0.95 Al 0.05 P 2 O 7 /KSn 2 (PO 4 ) 3 composite. The intermediate temperature electrical properties were determined by using impedance spectroscopy, oxygen concentration cell and hydrogen concentration discharge cell. Finally, the H 2 /O 2 fuel cell using the Sn 0.95 Al 0.05 P 2 O 7 /KSn 2 (PO 4 ) 3 as electrolyte membrane was constructed and the obtained maximum power output densities were 67.7 mW cm −2 and 142.1 mW cm −2 at 650 °C and 700 °C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced Battery Materials and Technologies · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. 1,2,4-Triazolium perfluorobutanesulfonate as an archetypal pure protic organic ionic plastic crystal electrolyte for all-solid-state fuel cells10.1039/C4EE02280G ↗
2. Niobium phosphates as an intermediate temperature proton conducting electrolyte for fuel cells10.1039/c2jm34704k ↗
3. Structural, morphological and mechanical investigations of in situ synthesized c-CeO2/α-Al2O3 composites10.1016/j.ceramint.2016.09.215 ↗
4. Proton-conducting solid oxide fuel cell (SOFC) with Y-doped BaZrO3 electrolyte10.1016/j.elecom.2017.05.006 ↗
5. Addressing fuel recycling in solid oxide fuel cell systems fed by alternative fuels10.1016/j.energy.2017.03.082 ↗
6. Nanomaterials for solid oxide fuel cells: a review10.1016/j.rser.2017.09.046 ↗
7. Study of the transport of alkali metal ions in a nonaqueous polymer electrolyte based on Nafion10.1016/j.ssi.2016.11.017 ↗
8. Effect of suspension stability on bonding strength and electrochemical behavior of electrophoretically deposited HA–YSZ nanostructured composite coatings10.1016/j.ceramint.2017.06.036 ↗
9. Nafion-AC-based asymmetric capacitive deionization10.1016/j.electacta.2016.12.069 ↗
10. Structure and conductivity of NiO/YSZ composite prepared via modified glycine-nitrate process at varying sintering temperatures10.1016/j.ceramint.2017.08.193 ↗
11. Comparative study of the sintering behaviors between YSZ and LZ/YSZ composite10.1016/j.matlet.2016.12.105 ↗
12. Proton conduction in In-doped SnP2O7 at intermediate temperatures10.1149/1.2210669 ↗
13. Structure, water uptake, and electrical conductivity of TiP2O710.1111/j.1551-2916.2010.04281.x ↗
14. Studies on ionic conductivity of Sr2+-doped CeP2O7 electrolyte in humid atmosphere10.1021/jp311547g ↗
15. Intermediate temperature proton conduction in Al-doped SnP2O710.1149/1.2789296 ↗
16. Proton conduction in non-doped and acceptor-doped metal pyrophosphate (MP2O7) composite ceramics at intermediate temperatures10.1039/c2jm15335a ↗
17. Effect of MnO doping in tetravalent metal pyrophosphate (MP2O7; M=Ce, Sn, Zr) electrolytes10.1016/j.ceramint.2015.10.082 ↗
18. An H3PO4-doped polybenzimidazole/Sn0.95Al0.05P2O7 composite membrane for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2011.03.094 ↗
19. Proton conduction in Sn0.95Al0.05P2O7–PBI–PTFE composite membrane10.1149/1.2897758 ↗
20. A proton-conducting composite membrane: Sn0.95Al0.05P2O7 and polystyrene-b-poly(ethylene/propylene)-b-polystyrene10.1016/j.electacta.2010.07.043 ↗
21. Fe0.4Ta0.5P2O7-based composite membrane for high-temperature, low-humidity proton exchange membrane fuel cells10.1016/j.electacta.2013.08.107 ↗
22. Phosphoric acid doped polybenzimidazole membranes: physiochemical characterization and fuel cell applications10.1023/A:1017558523354 ↗
23. Oxidative degradation of acid doped polybenzimidazole membranes and fuel cell durability in the presence of ferrous ions10.1016/j.jpowsour.2013.03.194 ↗
24. Capacity fade of NaTi2(PO4)3 in aqueous electrolyte solutions: relating pH increases to long term stability10.1016/j.electacta.2017.03.106 ↗
25. Cubic KTi2(PO4)3 as electrode materials for sodium-ion batteries10.1016/j.jcis.2016.08.007 ↗
26. The preparation and graphene surface coating NaTi2(PO4)3 as cathode material for lithium ion batteries10.1016/j.apsusc.2016.12.117 ↗
27. Potassium ditin(IV) tris[phosphate(V)], KSn2(PO4)3
28. NASICON-structured NaSn2(PO4)3 with excellent high-rate properties as anode material for lithium ion batteries10.1021/acs.chemmater.5b02471 ↗
29. Novel SrCe1-xYbxO3-α-(Na/K)Cl composite electrolytes for intermediate temperature solid oxide fuel cells10.1016/j.ssi.2017.09.009 ↗
30. Ionic conduction in Sn1-xScxP2O7 for intermediate temperature fuel cells10.1016/j.jpowsour.2010.07.067 ↗
31. Transport properties of BaCe0.95Y0.05O3-α mixed conductors for hydrogen separation10.1016/S0167-2738(97)00320-2 ↗
32. Proton conduction in acceptor doped SnP2O710.1016/j.ssi.2010.12.011 ↗
33. Conductivity of SnP2O7 and In-doped SnP2O7 prepared by anaqueous solution method10.1016/j.ssi.2008.11.006 ↗
34. Simultaneous doping with La3+ and Y3+ for Ba2+- and Ce4+- sites in BaCeO3 and the ionic conduction10.1016/S0167-2738(99)00005-3 ↗
35. Proton conductivity in stoichiometric and sub-stoichiometric yittrium doped SrCeO3 ceramic electrolytes10.1016/j.jpowsour.2004.02.036 ↗