journal article·2021-05

Transformation of polysilicon cutting waste into SiC/α-Si3N4 composite powders via electromagnetic induction heating

Qiaoyang Sun, Lei Yuan, Endong Jin, Tianpeng Wen, Chen Tian, Jingkun Yu

Ceramics International· Volume 47· Issue 9
Publisher page

Abstract

Abstract In order to use polysilicon cutting waste more efficiently, SiC/α-Si3N4 composite powders were prepared via electromagnetic induction heating at ambient pressure. Factors affecting synthesis and reaction mechanisms of the SiC/α-Si3N4 composite powders were investigated. Results show that the morphology of obtained α-Si3N4 consists of particles equiaxed with diameter in the micron range and one-dimensional Si3N4 nanowires with diameter of tens to hundreds of nanometers and length of up to tens of microns. It was found that the addition of NH4Cl can promote nitridation by controlling reaction temperature and participating in the reaction. In addition, the existence of Fe2O3 impurities was found to be beneficial to the formation of α-Si3N4 in reaction process by removing the SiO2 film from silicon and providing FeSi2 liquid phase as effective pass for vapor phase. Mechanisms used to grow Si3N4-NWs were vapor-solid (VS) and vapor-liquid-solid (VLS) depositions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. New processes for the production of solar-grade polycrystalline silicon: a review10.1016/j.solmat.2007.10.003 ↗
2. Ecodesign of organic photovoltaic modules from Danish and Chinese perspectives10.1039/C5EE01763G ↗
3. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
4. Preparation of αSi3N4 by direct nitridation using polysilicon waste by diamond wire cutting10.1111/ijac.13254 ↗
5. Recycling of silicon kerf waste for preparation of porous SiCw/SiC membrane supports by in situ synthesis10.1111/ijac.13314 ↗
6. Transformation of waste crystalline silicon into submicro β-SiC by multimode microwave sintering with low carbon emissions10.1016/j.powtec.2017.09.024 ↗
7. Preparation of Si3N4 porous ceramics via foam-gelcasting and microwave-nitridation method10.1016/j.ceramint.2018.06.231 ↗
8. Low-temperature preparation of Si3N4 whiskers bonded/reinforced SiC porous ceramics via foam-gelcasting combined with catalytic nitridation10.1016/j.jeurceramsoc.2017.10.043 ↗
9. Low-temperature preparation of Si3N4/SiC porous ceramics via foam-gelcasting and microwave-assisted catalytic nitridation10.1016/j.ceramint.2018.03.096 ↗
10. Self-propagating high temperature-synthesis of Si3N4: role of ammonium salt addition10.1016/S0955-2219(00)00168-0 ↗
11. Consolidation and mechanical properties of nanostructured 2MoSi2-SiC composite synthesized by high-frequency induction heated combustion10.1016/j.msea.2006.12.114 ↗
12. Simultaneous high-frequency induction heated combustion synthesis and consolidation of nanostructured HfSi2-SiC composite10.1016/j.ceramint.2008.08.007 ↗
13. Properties and fast low-temperature consolidation of nanocrystalline Ni-ZrO2 composites by high-frequency induction heated sintering10.1016/j.jallcom.2010.11.170 ↗
14. Effect of nickel boride additive on simultaneous densification and phase decomposition of TiB2-WB2 solid solutions by pressureless sintering using induction heating10.1016/j.jeurceramsoc.2006.05.081 ↗
15. Room temperature fast synthesis of zinc oxide nanowires by inductive heating10.1063/1.2709618 ↗
16. Carbon nanostructures produced by CCVD with induction heating10.1016/j.carbon.2003.12.034 ↗
17. Rapid synthesis of carbon nanotubes via inductive heating10.1063/1.2387942 ↗
18. Thermodynamics of refractory non-oxide and its composite materials
19. In situ preparation of SiC/Si3N4-NW composite powders by combustion synthesis10.1016/j.ceramint.2011.07.032 ↗
20. Cost effective combustion synthesis of silicon nitride10.1016/j.materresbull.2007.06.051 ↗
21. Preparation of Si3N4 powder by combustion synthesis
22. Combustion synthesis of Si3N4 powder10.1557/JMR.1997.0117 ↗
23. Reaction-bonded silicon nitride: its formation and properties10.1007/BF00561287 ↗
24. A mechanism for the nitridation of Fe-contaminated silicon10.1007/BF00548727 ↗
25. Formation mechanism of Si3N4 nanowires via carbothermal reduction of carbonaceous silica xerogels10.1021/jp0619282 ↗
26. On reactions between silicon and nitrogen10.1007/BF00551961 ↗
27. Growth and optical properties of ultra-long single-crystalline -Si3N4 nanobelts10.1007/s00339-004-3040-0 ↗
28. A simple method to synthesize Si3N4 and Si/SiO2 nanowires from Si or Si/SiO2 mixture10.1016/S0022-0248(01)01650-5 ↗
29. Catalystless synthesis of crystalline Si3N4/amorphous SiO2 nanocables from silicon substrates and N210.1016/j.cplett.2003.11.069 ↗