journal article·2021-09

Effect of sodium carbonate addition on the properties of calcium silicate scaffolds fabricated by 3DIP

Kang Liu, Jinping Sun, Zeyu Zhao, Zhuojun Zhang, Chuanjie Wang, Gang Chen, Peng Zhang

Ceramics International· Volume 47· Issue 17
Publisher page

Abstract

Abstract 3D ink printing (3DIP) technology can accurately control the macroscopic size and microstructure of bioceramic scaffolds. However, nonceramic components in the printing ink used in 3DIP severely affect densification, resulting in less desirable mechanical properties of the scaffolds. In this study, a strategy of sintering assisted by a sintering aid (sodium carbonate) was used to prepare calcium silicate (CSi) scaffolds with high strength. The addition of 1% sintering aid to a CSi scaffold sintered at 1100 °C led to an appreciable compressive strength (47.8 MPa) and high elastic modulus (1847 MPa). Moreover, the CSi scaffolds with sintering aids showed better degradation ability and mineralization ability than the CSi scaffolds without sintering aids. It is expected that the method involving strengthening with sintering aids will promote the application of 3DIP bioceramic scaffolds in the repair of bone defects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Bone structure and function
2. Substituted hydroxyapatites for bone regeneration: a review of current trends10.1002/jbm.b.33651 ↗
3. Structure and chemistry of the apatites and other calcium orthophosphates
4. Substituted hydroxyapatites for bone repair10.1007/s10856-012-4598-2 ↗
5. A biomimetic biphasic osteochondral scaffold with layer-specific release of stem cell differentiation inducers for the reconstruction of osteochondral defects10.1002/adhm.202000076 ↗
6. Application of inorganic nanocomposite hydrogels in bone tissue engineering10.1016/j.isci.2020.101845 ↗
7. Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review10.1021/bm200083n ↗
8. Biopolymers for tissue engineering applications: a review
9. Waste to health: a review of waste derived materials for tissue engineering10.1016/j.jclepro.2021.125792 ↗
10. Current advances in bone tissue engineering concerning ceramic and bioglass scaffolds: a review10.1016/j.ceramint.2019.07.096 ↗
11. Combustion assisted synthesis of hardystonite nanopowder10.1016/j.ceramint.2016.06.088 ↗
12. A review of bioactive silicate ceramics10.1088/1748-6041/8/3/032001 ↗
13. Porous scaffold prepared from α′L-Dicalcium silicate doped with phosphorus for bone grafts10.1016/j.ceramint.2017.09.208 ↗
14. Calcium silicate/calcium phosphate biphasic cements for vital pulp therapy: chemical-physical properties and human pulp cells response10.1007/s00784-015-1443-2 ↗
15. Self-setting properties and in vitro bioactivity of calcium sulfate hemihydrate-tricalcium silicate composite bone cements10.1016/j.actbio.2007.05.003 ↗
16. Preparation of macroporous calcium silicate ceramics10.1016/j.matlet.2004.01.008 ↗
17. A novel bioactive porous CaSiO3 scaffold for bone tissue engineering10.1002/jbm.a.30525 ↗
18. 3D gel printing of porous calcium silicate scaffold for bone tissue engineering10.1007/s10853-019-03626-1 ↗
19. 3D gel-printing of hydroxyapatite scaffold for bone tissue engineering10.1016/j.ceramint.2018.09.300 ↗
20. 3D-printed scaffolds with bioactive elements-induced photothermal effect for bone tumor therapy10.1016/j.actbio.2018.04.014 ↗
21. Bioactive glass-reinforced bioceramic ink writing scaffolds: sintering, microstructure and mechanical behavior10.1088/1758-5090/7/3/035010 ↗
22. Three-dimensional printing of complex structures: man made or toward nature10.1021/nn504894j ↗
23. Effect of PCL concentration on PCL/CaSiO3 porous composite scaffolds for bone engineering10.1016/j.ceramint.2020.02.079 ↗
24. Fabricating the nanostructured surfaces of CaSiO3 scaffolds10.1016/j.apsusc.2018.05.218 ↗
25. Effects of h-BN addition on microstructures and mechanical properties of beta-CaSiO3 bioceramics10.1016/j.jmbbm.2016.05.014 ↗
26. Enhanced mechanical property of Ca5(PO4)2SiO4 bioceramic by a biocompatible sintering aid of zinc oxide10.1016/j.ceramint.2018.07.051 ↗
27. Preparation and characterization of low temperature heat-treated 45S5 bioactive glass-ceramic analogues10.1515/bglass-2015-0008 ↗
28. Biomimetic gelatin/HA biocomposites with effective elastic properties and 3D-structural flexibility using a 3D-printing process10.1016/j.addma.2020.101616 ↗
29. The Ceramic Society of Japan · 2012
30. Sintering of calcium phosphate bioceramics10.1016/j.actbio.2012.11.029 ↗
31. Rahaman · 2017
32. Characterization of the compaction and sintering of hydroxyapatite powders by mercury porosimetry10.1016/0032-5910(74)80033-1 ↗
33. Controlled grain growth10.1016/B978-0-12-341809-8.50024-3 ↗
34. Grain growth in porous compacts10.1111/j.1151-2916.1965.tb14665.x ↗
35. Liquid‐phase sintering of ceramics10.1111/j.1151-2916.1987.tb04868.x ↗
36. Davis · 2012
37. Structure reinforcement of porous hydroxyapatite pellets using sodium carbonate as sintering aid: microstructure, secondary phases and mechanical properties10.1016/j.apt.2019.05.013 ↗