journal article·2024-09Open access

Optimisation of powder extrusion moulding process for thick ceramic electrodes of LiCoO2 for enhanced energy-density lithium-ion batteries

D. del Rio-Santos, C. de la Torre-Gamarra, A.J. Fernández-Ropero, B. Levenfeld, A. Varez

Ceramics International· Volume 50· Issue 18

Abstract

Lithium-ion batteries are widely used in portable electronic devices because of their high energy and power density. To enhance the energy density of these batteries, one strategy involves increasing the active material loading by increasing the thickness of the electrodes. In previous studies, we demonstrated that powder extrusion moulding (PEM) is a scalable and efficient method for producing additive-free LTO and LFP ceramic electrodes, which exhibit remarkable electrochemical performance with thicknesses up to 500 μm. This study focuses on the preparation and optimisation of the entire manufacturing process for thick ceramic electrodes of LiCoO2 (LCO) with a high mass loading of 180 mg cm−2 using the PEM process. Different powder loadings of mixtures of LCO and a thermoplastic multi-component binder were explored to obtain a formulation suitable for rheology. The optimal formulation comprises 60 vol% of powder. After binder removal via a combination of solvent and thermal treatment, followed by air sintering, parts with varying porosities were obtained. Striking a balance between porosity and thermal degradation is crucial for achieving optimal electrochemical behaviour. Electrochemical evaluations of the electrodes sintered at 900 °C and 1000 °C revealed areal capacity values as high as 17 mAh cm−2 at C/25 and 7 mAh cm−2 at C/6.25, respectively. These values far exceed the 1−2 mAh cm−2 obtained from commercial LCO electrodes. These results indicate a strategy for the production of electrodes to fabricate lithium-ion batteries with a low ratio of inactive materials and, therefore, with higher energy densities.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. High-voltage “single-Crystal” cathode materials for lithium-ion batteries10.1021/acs.energyfuels.0c03608 ↗
2. Progress and perspective of high-voltage lithium cobalt oxide in lithium-ion batteries10.1016/j.jechem.2022.07.007 ↗
3. Electrode architecture design to Promote charge‐transport kinetics in high‐loading and high‐energy lithium‐based batteries10.1002/smtd.202100518 ↗
4. Recent progress and perspectives on designing high-performance thick electrodes for all-solid-state lithium batteries10.1016/j.etran.2021.100152 ↗
5. Thick electrode batteries: Principles, Opportunities, and Challenges10.1002/aenm.201901457 ↗
6. Thick electrodes for high energy lithium ion batteries10.1149/2.0401507jes ↗
7. Sintered electrode full cells for high energy density lithium-ion batteries10.1007/s10800-018-1242-y ↗
8. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
9. All-solid-state batteries with thick electrode Configurations10.1021/acs.jpclett.7b02880 ↗
10. High‐performance, low‐cost, and dense‐structure electrodes with high mass loading for lithium‐ion batteries10.1002/adfm.201903961 ↗
11. Stable cycling of high-density three-dimensional sintered LiCoO2 plate cathodes10.1016/j.jpowsour.2022.232223 ↗
12. Three-dimensional cathode with periodically aligned microchannels for improving volumetric energy density of lithium-ion batteries10.1016/j.jpowsour.2020.227764 ↗
13. Enhancing low electronic conductivity materials in all active material electrodes through multicomponent architecture10.1039/D2YA00269H ↗
14. Electronically conductive metal oxide incorporation in electrode to enable high energy density all active material electrodes10.1016/j.jelechem.2023.117920 ↗
15. Fabrication and characterization of plasma Sprayed TiO2 and Li4Ti5O12 materials as all active material lithium-ion battery electrodes10.3390/batteries9120598 ↗
16. Challenges in solvent-free methods for manufacturing electrodes and electrolytes for lithium-based batteries10.3390/polym13030323 ↗
17. Design of battery electrodes with Dual-Scale porosity to minimize tortuosity and maximize performance10.1002/adma.201204055 ↗
18. Levenfeld Laredo
19. Additive-free Li4Ti5O12 thick electrodes for Li-ion batteries with high electrochemical performance10.1039/C7TA10683A ↗
20. High mass loading additive-free LiFePO4 cathodes with 500 μm thickness for high areal capacity Li-ion batteries10.1016/j.jpowsour.2020.228033 ↗
21. Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries10.1016/j.jpowsour.2019.226923 ↗
22. Optimization of the processing of 8-YSZ powder by powder injection Molding for SOFC electrolytes10.1111/j.1744-7402.2008.02286.x ↗
23. High-capacity Li4Ti5O12-C thick ceramic electrodes manufactured by powder injection moulding
24. Prospects and problems with ceramic injection moulding10.4028/www.scientific.net/KEM.56-57.265 ↗
25. Manas-Zloczower · 2012
26. Viscometry and plastometry
27. Speed function of viscosity of disperse systems I10.1007/BF01431449 ↗
28. Effective length Scale for Predicting solvent-Debinding times of components produced by powder injection Molding10.1111/j.1151-2916.1999.tb01888.x ↗
29. Enhanced cycle stability of LiCoO2 at high voltage by mixed conductive Li7.5La3Zr1.5Co0.5O12 coating10.1016/j.ceramint.2020.07.080 ↗
30. Chemical Transformations in Li-ion battery electrode materials by Carbothermic reduction10.1021/acssuschemeng.8b06540 ↗
31. Synthesis and thermal stability of LiCoO210.1006/jssc.1995.1238 ↗
32. Electronic structure of CoO, Li-doped electronic structure of CoO, Li-doped CoO, and LiCoO210.1103/PhysRevB.44.6090 ↗
33. Electronic conductivity of LiCoO2 and its Enhancement by Magnesium doping10.1149/1.1837976 ↗
34. Thick sintered electrode lithium-ion battery discharge Simulations: Incorporating lithiation-Dependent electronic conductivity and lithiation gradient due to charge cycle10.1149/1945-7111/abc747 ↗
35. Exploring the influence of porosity and thickness on lithium-ion battery electrodes using an image-based model10.1016/j.jpowsour.2022.231779 ↗
36. Thick electrode with thickness-independent capacity enabled by assembled two-dimensional porous nanosheets10.1016/j.ensm.2020.12.034 ↗
37. Impact of electrode porosity architecture on electrochemical performances of 1 mm-thick LiFePO4 binder-free Li-ion electrodes fabricated by Spark Plasma Sintering10.1016/j.jpowsour.2020.229402 ↗
38. Diffusion‐limited C‐rate: a Fundamental Principle Quantifying the Intrinsic limits of Li‐ion batteries10.1002/aenm.201902523 ↗
39. Quantifying the factors limiting rate performance in battery electrodes10.1038/s41467-019-09792-9 ↗