journal article·2019-06

In situ characterization of LiY(WO4)2 nanotubes for electrochemical energy storage

Zehu Xie, Na Peng, Tingting Liu, Xing Cheng, Wuquan Ye, Runtian Zheng, Jundong Zhang, Haoxiang Yu, Jie Shu

Ceramics International· Volume 45· Issue 9
Publisher page

Abstract

Abstract Here, LiY(WO4)2 nanotubes are prepared via a feasible electrospinning technique. This new anode material shows excellent electrochemical properties. The capacity loss of LiY(WO4)2 nanotubes is as low as 6.9% after 156 cycles, while bulk LiY(WO4)2 presents the capacity loss higher than 55.0%. Even after 600 long-life cycles, the capacity loss of the nanotubes is only 9%. It can be seen that the hollow structure with a rough surface and a porous morphology contributes to the improvement of electrochemical performance. Furthermore, online X-ray diffraction (XRD) method is firstly applied to understand the lithium ions insertion/extraction mechanism of LiY(WO4)2 nanotubes. It can be concluded that it is an asymmetrical two-phase reaction. A phase transformation from LiY(WO4)2 to Li3Y(WO4)2 can be obviously seen from the in situ XRD during discharge process. While Li2Y(WO4)2 appears as an intermediate phase with a reverse charge reaction. In addition, in situ XRD also demonstrates that LiY(WO4)2 nanotubes have surprised electrochemical reversibility. All the above results indicate that LiY(WO4)2 nanotubes can be expected to be anode candidate for rechargeable lithium ion batteries (LIBs).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Progress in electrical energy storage system: a critical review10.1016/j.pnsc.2008.07.014 ↗
2. Building better batteries10.1038/451652a ↗
3. A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries10.1038/ncomms3365 ↗
4. BaNb3.6O10 nanowires with superior electrochemical performance towards ultrafast and highly stable lithium storage10.1016/j.ensm.2018.06.018 ↗
5. Investigation of reversible Li insertion into LiY(WO4)210.1021/acs.chemmater.6b01341 ↗
6. LiCrTiO4 nanowires with the (111) peak evolution during cycling for high-performance lithium ion battery anodes10.1021/acssuschemeng.7b02567 ↗
7. FeNb11O29 nanotubes: superior electrochemical energy storage performance and operating mechanism10.1016/j.nanoen.2019.01.065 ↗
8. Seed-assisted synthesis of highly ordered TiO2@alpha-Fe2O3 core/shell arrays on carbon textiles for lithium-ion battery applications10.1039/c2ee03396h ↗
9. Hierarchical 3D Co3O4@MnO2 core/shell nanoconch arrays on Ni foam for enhanced electrochemical performance10.1007/s10008-014-2611-z ↗
10. Seed-assisted synthesis of Co3O4@alpha-Fe2O3 core-shell nanoneedle arrays for lithium-ion battery anode with high capacity10.1039/c3ra47189f ↗
11. Single-crystalline LiMn2O4 nanotubes synthesized via template-engaged reaction as cathodes for high power lithium ion batteries10.1002/adfm.201001448 ↗
12. Recent advances in metal oxide-based electrode architecture design for electrochemical energy storage10.1002/adma.201202146 ↗
13. SnO2 and TiO2 nanosheets for lithium-ion batteries10.1016/S1369-7021(12)70115-3 ↗
14. Nanostructured anode materials for lithium ion batteries: progress, challenge and perspective10.1002/aenm.201600374 ↗
15. Rational material design for ultrafast rechargeable lithium-ion batteries10.1039/C4CS00442F ↗
16. Alternate synthesis and reflectivity spectrum of stage l lithium-graphite intercalation compound10.1016/0008-6223(78)90026-X ↗
17. A reversible graphite-lithium negative electrode for electrochemical generators10.1016/0378-7753(83)87040-2 ↗
18. TiNb2O7 hollow nanofiber anode with superior electrochemical performance in rechargeable lithium ion batteries10.1016/j.nanoen.2017.05.057 ↗
19. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems--the solid electrolyte interphase model10.1149/1.2128859 ↗
20. Composition, depth profiles and lateral distribution of materials in the SEI built on Hopg-TOF SIMS and XPS studies10.1016/S0378-7753(01)00505-5 ↗
21. Electrochemically lithiated graphite characterized by photoelectron spectroscopy10.1016/S0378-7753(03)00277-5 ↗
22. W3Nb14O44 nanowires: ultrastable lithium storage anode materials for advanced rechargeable batteries10.1016/j.ensm.2018.09.008 ↗
23. A corrected procedure and consistent interpretation for temperature programmed reduction of supported MoO310.1007/BF00814265 ↗
24. Li3V(MoO4)3: a new material for both Li extraction and insertion10.1021/cm100213a ↗
25. LiFe(MoO4)2 as a novel anode material for lithium-ion batteries10.1021/am502352c ↗
26. Synthesis and redox behavior of a new polyanion compound, Li2Co2(MoO4)3, as 4 V class positive electrode material for lithium batteries10.1007/BF02410310 ↗
27. Synthesis of a polyanion cathode material, Li2Co2(MoO4)3, and its electrochemical properties for lithium batteries10.1149/1.1804093 ↗
28. Brannerite-type vanadium-molybdenum oxide LiVMoO6 as a promising anode material for lithium-ion batteries with high capacity and rate capability10.1021/acsami.5b05030 ↗
29. Improved cycling performance of nano-composite Li2Ni2(MoO4)3 as a lithium battery cathode material10.1016/j.jpowsour.2006.04.133 ↗
30. New lithiated NASICON-type Li2Ni2(MoO4)3 for rechargeable lithium batteries-synthesis, structural, and electrochemical properties10.1149/1.1760711 ↗
31. Electrochemical characterization of amorphous LiFe(WO4)2 thin films as positive electrodes for rechargeable lithium batteries10.1016/j.electacta.2008.04.063 ↗
32. Effects of different electrolytes containing Na2WO4 on the electrochemical performance of nickel hydroxide electrodes for nickel-metal hydride batteries10.1016/j.ijhydene.2013.12.070 ↗
33. Crystal structure of LiLnW2O8 (Ln=lanthanides and Y): an X-ray powder diffraction study10.1016/j.jssc.2011.05.046 ↗
34. Reversible lithium storage at highly populated vacant sites in an amorphous vanadium pentoxide electrode10.1021/cm502268u ↗
35. Intercalation pseudo-capacitive TiNb2O7@carbon electrode for high-performance lithium ion hybrid electrochemical supercapacitors with ultrahigh energy density10.1016/j.nanoen.2015.04.011 ↗
36. MnFe2O4@C nanofibers as high-performance anode for sodium-ion batteries10.1021/acs.nanolett.6b00942 ↗
37. Electrospun core-shell fibers for robust silicon nanoparticle-based lithium ion battery anodes10.1021/nl203817r ↗
38. K6Nb10.8O30 groove nanobelts as high performance lithium-ion battery anode towards long-life energy storage10.1016/j.nanoen.2018.07.057 ↗
39. Deep insights into kinetics and structural evolution of nitrogen-doped carbon coated TiNb24O62 nanowires as high-performance lithium container10.1016/j.nanoen.2018.10.025 ↗
40. Rapid and durable electrochemical storage behavior enabled by V4Nb18O55 beaded nanofibers: a joint theoretical and experimental study10.1039/C8TA05447A ↗
41. LiCrTiO4: a high-performance insertion anode for lithium-ion batteries10.1002/cphc.201200398 ↗
42. Nanocrystalline LiCrTiO4 as anode for asymmetric hybrid supercapacitor10.1016/j.ssi.2010.04.016 ↗
43. Spinel LiCrTiO4 fibers as an advanced anode material in high performance lithium ion batteries10.1016/j.ssi.2013.01.018 ↗
44. Comparative study of Na2Li2Ti6O14 prepared by different methods as advanced anode material for lithium-ion batteries10.1016/j.jelechem.2014.01.005 ↗
45. Recent advances in the research of MLi2Ti6O14 (M=2Na, Sr, Ba, Pb) anode materials for Li-ion batteries10.1016/j.jpowsour.2018.07.086 ↗
46. Recent progress of NiCo2O4-based anodes for high-performance lithium-ion batteries10.1016/j.cossms.2018.05.005 ↗
47. Controllable synthesis of hierarchical ball-in-ball hollow microsphere for high performance layered Li-rich oxide cathode material10.1039/C7TA02553J ↗
48. Facile synthesis of lithium-vanadium-molybdenum oxide nanocomposite as high-performance anode material for lithium ion batteries10.1016/j.ceramint.2016.12.011 ↗
49. Sol-gel synthesis and in situ X-ray diffraction study of Li3Nd3W2O12 as a lithium container10.1021/acsami.8b01329 ↗
50. Effect of sodium-site doping on enhancing the lithium storage performance of sodium lithium titanate10.1021/acsami.6b01293 ↗
51. Nano-sized copper tungstate thin films as positive electrodes for rechargeable Li batteries10.1016/j.electacta.2008.01.014 ↗
52. Design of well-defined porous Ti2Nb10O29/C microspheres assembled from nanoparticles as anode materials for high-rate lithium ion batteries10.1016/j.electacta.2018.09.133 ↗
53. Intercalation pseudo-capacitive TiNb2O7@carbon electrode for high-performance lithium ion hybrid electrochemical supercapacitors with ultrahigh energy density10.1016/j.nanoen.2015.04.011 ↗
54. Enhanced rate performance of Li4Ti5O12 anode material by ethanol-assisted hydrothermal synthesis for lithium-ion battery10.1016/j.ceramint.2014.02.077 ↗
55. Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS10.1016/j.electacta.2011.02.119 ↗
56. Studies on stability and capacity for long-life cycle performance of Li(Ni0.5Co0.2Mn0.3)O2 by Mo modification for lithium-ion battery10.1016/j.jpowsour.2017.05.013 ↗
57. 3D NiCo2S4 nanorod arrays as electrode materials for electrochemical energy storage application10.1016/j.ceramint.2016.08.133 ↗
58. Li5Cr7Ti6O25 as a novel negative electrode material for lithium-ion batteries10.1039/C5CC05349H ↗
59. Synthesis and electrochemical properties of Li4Ti5O1210.1016/j.jallcom.2011.03.078 ↗