Evolution on phase composition and properties of alumina-based ceramics fabricated from high-titania special-grade natural bauxite micropowder
Source abstract
Abstract
Abstract In this study, Al2O3-based ceramics were fabricated with natural bauxite powder as the raw material. The phase compositions evolution behavior during the heat treatment and its influence on the properties of fabricated ceramics were investigated. With increasing heat treatment temperature, the sintering degree of high-titania special-grade bauxite became better. The samples showed decreased porosity, increased bulk density, Vickers hardness, fracture toughness and flexural strength. However, when the heat temperature increased to 1650 °C, decomposition of tieillite occurs in sample, leading to increased Al2O3 and TiO2 content in the liquid phase. Corundum and mullite grains with anisotropic growth appeared in the samples, leading to a decrease in the density, the Vickers hardness and flexural strength of samples decreased consequently. However, those anisotropic grains could prolong the crack propagation path and improve the fracture toughness of the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Additive manufacturing of dense alumina ceramics10.1111/ijac.12319 ↗
2. Ballistic performance of Al2O3 mosaic armors with gap-filling materials10.1016/j.ceramint.2016.11.087 ↗
3. Correlations among processing parameters and porosity of a lightweight alumina10.1016/j.ceramint.2018.05.005 ↗
4. Fabrication of lightweight alumina with nanoscale intracrystalline pores10.1111/jace.16914 ↗
5. Fracture toughness enhancement for alumina systems: a review10.1111/j.1744-7402.2008.02224.x ↗
6. Novel design of elongated mullite reinforced highly porous alumina ceramics using carbonized rice husk as pore-forming agent10.1016/j.ceramint.2019.04.095 ↗
7. Preparation and properties of porous SiC-Al2O3 ceramics using coal ash10.1111/ijac.13080 ↗
8. Effects of sintering temperature and V2O5 additive on the properties of SiC-Al2O3 ceramic foams10.1016/j.jallcom.2017.10.170 ↗
9. Effects of pyrolusite and dolomite co-additives on the structure and properties of bauxite-based ceramics10.1016/j.matchemphys.2019.03.072 ↗
10. Influence of Si3N4 content on the physical and mechanical properties of zirconia-toughened alumina (ZTA) ceramic composites10.1088/2053-1591/ab0e54 ↗
11. Modelling and optimizing the liquid phase sintering of alumina/CaO–SiO2–Al2O3 ceramics using response surface methodology10.1016/j.ceramint.2020.09.153 ↗
12. Low-temperature sintering of coarse alumina powder compact with sufficient mechanical strength10.1016/j.ceramint.2017.01.024 ↗
13. Negative permittivity in titanium nitride‐alumina composite for functionalized structural ceramics10.1111/jace.16763 ↗
14. Effects of TiO2 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina ceramic composite10.1016/j.ceramint.2014.11.080 ↗
15. Effect of MgO·Al2O3·SiO2 glass-ceramic as sintering aid on properties of alumina armors10.1016/j.msea.2020.139237 ↗
16. Effect of addition of TiO2 on reaction sintered MgO–Al2O3 spinels10.1016/S0955-2219(00)00097-2 ↗
17. Influence of TiO2 additive on sintering temperature and microwave dielectric properties of Mg0.90Ni0.1SiO3 ceramics10.1016/j.jeurceramsoc.2017.03.047 ↗
18. Anisotropic grain growth in α‐Al2O3 with SiO2 and TiO2 additions10.1111/j.1151-2916.2000.tb01642.x ↗
19. Constitution of calcined refractory-grade bauxites: an interpretation10.1016/0272-8842(85)90008-2 ↗
20. Refractory bauxites. How processing can improve high temperature mechanical properties10.1016/0272-8842(86)90038-6 ↗
21. Effect of TiO2 on phase evolution and microstructure of MgAl2O4 spinel in different atmospheres10.1016/j.ceramint.2010.09.016 ↗
22. Aluminum titanate formation by solid-state reaction of fine Al2O3 and TiO2 powders10.1111/j.1151-2916.1987.tb04849.x ↗
23. Sandwich materials formed by thick alumina tapes and thin-layered alumina–aluminium titanate structures shaped by EPD10.1016/j.jeurceramsoc.2008.07.048 ↗
24. Effect of TiO2 on the mullite formation and mechanical properties of alumina porcelain10.1016/j.jeurceramsoc.2009.10.009 ↗
25. Effects of liquid phases on densification of TiO2-doped Al2O3–ZrO2 composite ceramics10.1016/j.ceramint.2013.08.049 ↗
26. Microstructure and superplastic behavior of TiO2-doped Al2O3–ZrO2 (3Y) composite ceramics10.1016/j.msea.2012.05.079 ↗
27. Anisotropic grain growth in α‐Al2O3 with SiO2 and TiO2 additions10.1111/j.1151-2916.2000.tb01642.x ↗
28. Synthesis, evaluation and characterization of alumina ceramics with elongated grains10.1016/j.ceramint.2004.10.008 ↗
29. Influence of additives on density, microstructure and mechanical properties of alumina10.1016/S0924-0136(02)00956-1 ↗
30. Effect of Al2O3 particle size on the mechanical properties of alumina-based ceramics10.1016/j.msea.2006.10.073 ↗
31. Effect of strontia on the densification and mechanical properties of sol–gel alumina10.1016/j.ceramint.2005.06.014 ↗