Insights into tribological performances of magnetron-sputtered Si-B-C-N films in air and seawater conditions
Source abstract
Abstract
The Si-B-C-N composite films were deposited using a RF magnetron co-sputtering system with separate SiC and B targets under the Ar + N 2 gas mixture, to optimize self-lubricant behaviors in both air and artificial seawater environments. Results revealed a total X-ray amorphous structure across all films, regardless of B content, characterized by the predominant chemical bonds of Si-C, Si-N, B-N and C-C (sp 2 and sp 3 ). Despite this amorphous nature, some twisted lattice fringes corresponding to graphitic basal planes were observed. The incorporation of B maintained the film's hardness at approximately 20 GPa while progressively increasing the elastic modulus, likely due to bond length shortening. In air, the films with 16.1 at.% B content exhibited significantly enhanced anti-friction and wear resistance properties, which were attributed to the formation of as-deposited lubricant chemical bonds (C-C, B-N, and C-N) and stable hardness. Under artificial seawater, the coefficient of friction remained stable, ranging from 0.35 to 0.40, irrespective of B content. However, the wear rate gradually increased with higher B content, primarily due to tribo-corrosion effects and the reduction in the hardness-to-elastic modulus ratio.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Bibliometric analysis for ocean renewable energy: an comprehensive review for hotspots, frontiers, and emerging trends10.1016/j.rser.2022.112739 ↗
2. Environmental impact of renewable energy source based electrical power plants: solar, wind, hydroelectric, biomass, geothermal, tidal, ocean and osmotic10.1016/j.rser.2022.112279 ↗
3. Genome engineering of materials based on Ce doping, high-performance electromagnetic wave absorber for marine environment10.1016/j.compositesb.2024.111882 ↗
4. Research progress of marine anti-corrosion and wear-resistant coating10.1016/j.triboint.2024.109864 ↗
5. Evaluation under temperature cycling of the tribological properties of Ag-SiNx films for green tribological applications10.1016/j.ceramint.2023.06.267 ↗
6. J. Luan, F. Kong, J. Xu, F. Fernandes, M. Evaristo, S. Dong, A. Cavaleiro, H. Ju. Deciphering the mechanical strengthening mechanism: Soft metal doping in ceramic matrices-A case study of TiN-Ag films. Mater. Design. 248 (2024) 113489.10.1016/j.matdes.2024.113489 ↗
7. Shihong Zhang. Enhancing the durability of Ti–Al–C coatings: The role of powder composition and processing variables10.1016/j.jmrt.2024.12.226 ↗
8. Microstructure, mechanical and tribological properties of TiN-Ag films deposited by reactive magnetron sputtering10.1016/j.vacuum.2017.03.026 ↗
9. Improved tribo-corrosion performance of duplex treatment on H13 steel by plasma nitriding and CrAlN coating10.1016/j.surfin.2025.105738 ↗
10. Stability of small chemical groups on hexagonal-SiC(0001) surfaces: A theoretical study10.1016/j.susc.2012.03.022 ↗
11. A novel SiC composite material infilatrated by basalt glass-ceramic with a high hardness10.1016/j.ceramint.2023.05.293 ↗
12. Silicon carbide/enamel composite coatings for steel corrosion protection: Microstructure, thermal expansion behavior, and anti-corrosion performance10.1016/j.surfcoat.2022.128172 ↗
13. X. Yang, Q. Huang, Z. Su, X. Chang, L. Chai, C. Liu, L. Xie, D. Huang. Resistance to oxidation and ablation of SiC coating on graphite prepared by chemical vapor reaction. Corrosion Science. 75(2013): 16-27.10.1016/j.corsci.2013.05.009 ↗
14. Corrosion of SiC-coated graphite susceptor by NH and Cl10.1016/j.ceramint.2021.10.208 ↗
15. Enhancing the corrosion resistance of polymer derived ceramic coatings on steels by incorporating SiC nanowires10.1016/j.matlet.2024.136839 ↗
16. Finite element simulation of stress distribution and development of Cf/SiC ceramic-matrix composite coated with single layer SiC coating during thermal shock10.1016/j.compositesb.2013.03.028 ↗
17. Influence of the PVD sputtering method on structural characteristics of SiCN-coatings-Comparison of RF, DC and HiPIMS sputtering and target configurations10.1016/j.surfcoat.2011.04.095 ↗
18. Characterization of sp3 bond content of carbon films deposited by high power gas injection magnetron sputtering method by UV and VIS Raman spectroscopy10.1016/j.saa.2018.01.015 ↗
19. Study of structural and electronic environments of hydrogenated amorphous silicon carbonitride (a-SiCN:H) films deposited by hot wire chemical vapor deposition10.1016/j.apsusc.2008.02.077 ↗
20. Amorphous Silicoboron Carbonitride Ceramic with Very High Viscosity at Temperatures above 150
21. C. Haluschka, H. Kleebe, R. Franke, R. Riedel. Silicon carbonitride ceramics derived from polysilazanes Part I. Investigation of compositional and structural properties. Journal of the European Ceramic Society. 20(2000): 1355-1364.10.1016/S0955-2219(00)00010-8 ↗
22. J. Kalas, R. Vernhes, S. Hreben, J. Vlcek, J. E. Klemberg-Sapieha, L. Martinu. High-temperature stability of the mechanical and optical properties of Si-B-C-N films prepared by magnetron sputtering. Thin Solid Films. 518(2009): 174-179.10.1016/j.tsf.2009.06.017 ↗
23. Houška · Influence of substrate bias voltage on structure and properties of hard Si-B-C-N films prepared by reactive magnetron sputtering. Diamond and Related Materials · 2007 · 16 · 29
24. J. Cizek, J. VLCEK, S. Potocky, J. Houska, Z. Soukup, J. Kalas, P. Jedrzejowski, J. E. Klemberg-Sapieha, L. Martinu. Mechanical and optical properties of quaternary Si-B-C-N films prepared by reactive magnetron sputtering. Thin Solid Films. 516(2008): 7286-7293.10.1016/j.tsf.2007.12.156 ↗
25. Microstructure characterization of high-temperature, oxidation-resistant Si-B-C-N films10.1016/j.tsf.2013.07.013 ↗
26. T. Berlind, N. Hellgren, M. P. Johansson, L. Hultman. Microstructure, mechanical properties, and wetting behavior of Si-C-N thin films grown by reactive magnetron sputtering. Surface and Coatings Technology. 141(2001): 145-155.10.1016/S0257-8972(01)01236-1 ↗
27. K. Quillin, H. Yeom, X. Pu, D. Frazer, K. N. Sasidhar, K. Sridharan. Effects of elevated temperature exposure on the residual stress state and microstructure of PVD Cr coatings on SiC investigated via in situ X-ray diffraction and transmission electron microscopy. 879(2023):145273.10.1016/j.msea.2023.145273 ↗
28. Effect of substrate temperature on the adhesion properties of magnetron sputtered nano-composite Si-C-N hard films10.1016/j.matlet.2007.05.043 ↗
29. DIET in the bulk: evidence for hot electron cleavage of Si H bonds in SiO2 films10.1016/S0039-6028(97)00527-X ↗
30. Y. Harima, L. Zhu, H. Tang, K. Yamashita, A. Takata, J. Ohshita, A. Kunai, M. Ishikawa. Electrochemical cleavage of a Si-Si bond in poly[(tetraethyldisilanylene)oligo(2,5-thienylene)] films. Synthetic Metals. 98(1998): 79-81.10.1016/S0379-6779(98)00159-3 ↗
31. The affinity of Si-N and Si-C bonding in amorphous silicon carbon nitride (a-SiCN) thin film10.1016/j.diamond.2004.10.045 ↗
32. D. H. Zhang, Y. Gao, J. Wei, Z. Q. Mo. Influence of silane partial pressure on the properties of amorphous SiCN films prepared by ECR-CVD. Thin Solid Films. 377-378(2000):607-610.10.1016/S0040-6090(00)01277-3 ↗
33. Correlation between the dielectric constant and X-ray diffraction pattern of Si-O-C thin films with hydrogen bonds10.1016/j.tsf.2004.06.089 ↗
34. Wrobel · Silicon Carbonitide (SiCN) Films by Remote Hydrogen Microwave Plasma CVD from Tri(dimethylamino)silane as Novel Single-Source Precusor. Chemical Vapor Deposition · 2010 · 27
35. Room temperature oxidation of magnetron sputtered Si-C-N films10.1016/j.apsusc.2011.11.012 ↗
36. XPS studies of amorphous SiCN thin films prepared by nitrogen ion-assisted pulsed-laser deposition of SiC target10.1016/S0925-9635(01)00422-8 ↗
37. A. Berche, J. Tedenac, P. Jund. First-principles determination of the enthalpy of formation of Mn-Si phases. Solid State Communications. 188(2014):49-52.10.1016/j.ssc.2014.02.021 ↗
38. The affinity of Si-N and Si-C bonding in amorphous silicon carbon nitride (a-SiCN) thin film10.1016/j.diamond.2004.10.045 ↗
39. Deconvoluting the XPS spectra for nitrogen-doped chars: An analysis from first principles10.1016/j.carbon.2020.02.065 ↗
40. Improving the deconvolution and interpretation of XPS spectra from chars by ab initio calculations10.1016/j.carbon.2016.09.012 ↗
41. H. Kim, U. Kim, D. Hong, S. Kim, S. Han, Y. Joo, S. Lee. Bonding structure and dry etching characteristics in amorphous B-C-N films for hardmask applications. Carbon. 226(2024):119218.10.1016/j.carbon.2024.119218 ↗
42. Boron carbonitride coatings synthesized by LPCVD, structure and properties10.1016/j.carbon.2017.06.024 ↗
43. Y. Awad, M. A. El Khakani, C. Aktik, J. Mouine, N. Camire, M. Lessard, M. Scarlete, H. A. Abadleh, R. Smirani. Structural and mechanical properties of amorphous silicon carbonitride films prepared by vapor-transport chemical vapor deposition. Surface and Coatings Technology. 204(2009):539-545.10.1016/j.surfcoat.2009.08.032 ↗
44. A. Brevet, P. M. Peterle, L. Imhoff, M. C. Marco de Lucas, S. Bourgeois. Initial stages of TiO2 thin films MOCVD growth studied by in situ surface analyses. Journal of Crystal Growth. 275(2005): 1263-1268.10.1016/j.jcrysgro.2004.11.081 ↗
45. Unraveling the evolution of multigap superconductivity in layered Na-B-C films: An additional energy gap induced by the internal B-C layer10.1016/j.mtphys.2024.101532 ↗
46. J. Vlcek, M. Kormunda, J. Cizek, Z. Soukup, V. Perina, J. Zemek. Reactive magnetron sputtering of Si-C-N films with controlled mechanical and optical properties. Diamond and Related Materials. 12(2003):1287-1294.10.1016/S0925-9635(03)00078-5 ↗
47. Composition and chemical bonding of pulsed laser deposited carbon nitride thin films10.1063/1.1309041 ↗
48. Express formation and characterization of SERS-active substrate from a non-degradable Ag-Nb-N-O film10.1016/j.apsusc.2023.158682 ↗
49. Influence of deposition parameters on surface roughness and mechanical properties of boron carbon nitride coatings synthesized by ion beam assisted deposition10.1016/j.tsf.2005.10.070 ↗
50. Bonding structure and mechanical properties of B-C-N thin films synthesized by pulsed laser deposition at different laser fluences10.1016/j.tsf.2016.02.053 ↗
51. Microstructure, mechanical and high-temperature tribological properties of amorphous SiC films by pulsed magnetron sputtering10.1016/j.jnoncrysol.2022.121949 ↗
52. J. Vlcek, M. Kormunda, J. Cizek, V. Perina, J. Zemek. Influence of nitrogen-argon gas mixtures on reactive magnetron sputtering of hard Si-C-N films. Surface and Coatings Technology. 160(2002): 74-81.10.1016/S0257-8972(02)00328-6 ↗
53. D. Rats, L. Vandenbulcke, R. Herbin, R. Benoit, R. Erre, V. Serin, J. Sevely. Characterization of diamond films deposited on titanium and its alloys. Thin Solid Films. 270(1995): 177-183.10.1016/0040-6090(95)06913-5 ↗
54. The structure, surface topography and mechanical properties of Si-C-N films fabricated by RF and DC magnetron sputtering10.1016/j.apsusc.2011.09.036 ↗
55. Influence of Ag on the microstructure, mechanical and tribological properties of SiC-Ag composite film deposited by the industrial DC magnetron sputtering system10.1016/j.vacuum.2023.112672 ↗
56. D. Yu, X. Ma, H. Li, S. Zhang, J. Qiu, H. Huang, W. Wang, X. Zhou, M. Wen, P. Ren. Hard-yet-tough Mo-Si-C protective films for simultaneous friction and wear performance enhancement. Applied Surface Science. 665(2024): 160302.10.1016/j.apsusc.2024.160302 ↗
57. Crystallization of SiC and its effects on microstructure, hardness and toughness in TaC/SiC multilayer films10.1016/j.ceramint.2017.09.220 ↗
58. D. Nath, S. Chakravarty, S. Abhaya, A. Singh, K. Saravanan, U. P. Deshpande, N. V. Chandra Shekar. Oxygen ion irradiation-driven Al-vacancy mediated room-temperature magnetron induced in amorphous Al-N-O alloy thin films. Ceramics International. 50(2024):18868-18879.10.1016/j.ceramint.2024.02.376 ↗
59. J. Luan, H. Lu, J. Xu, F. Fernandes, M. Evaristo, B. Ma, F. Xie, A. Cavaleiro, H. Ju. Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis. Surface and Coatings Technology. 484(2024):130813.10.1016/j.surfcoat.2024.130813 ↗
60. Crystal structure and high temperature tribological behavior of niobium aluminum nitride films10.1016/j.mtla.2018.08.025 ↗
61. H. Ju, R. Zhou, J. Luan, L. Yu, J. Xu, B. Zuo, J. Yang, Y. Geng, L. Zhao, F. Fernandes. Multilayer Mo2N-Ag/SiNx films for demanding applications: Morphology, structure and temperature-cycling tribological properties. Material & Design.223(2022):111128.10.1016/j.matdes.2022.111128 ↗
62. J. Luan, F. Kong, M. Evaristo, F. Fernandes, Y. Zhou, A. Cavaleiro, H.Ju. Design and magnetron sputtering of nanomultilayered W2N/Ag-SiNx films: Microstructural insights and optimized self-lubricant properties from room temperature to 500 °C. Ceramics International. 50(2024):39226-39234.10.1016/j.ceramint.2024.07.292 ↗
63. H. Ju, R. Wang, W. Wang, J. Xu, L. Yu, H. Luo.The microstructure and tribological properties of molybdenum and silicon nitride composite films. Surface and Coatings Technology. 401(2020):126238.10.1016/j.surfcoat.2020.126238 ↗
64. X. C. LeQuan, W. P. Kang, J. L. Davidson, B. K. Choi, Y. M. Wong, R. Barbosa, W. Lu. Effect of rearranging sp2/sp3 hybridized-bonding on the field emission characteristics of nano-crystalline diamond films. Diamond and Related Materials. 18(2009): 200-205.10.1016/j.diamond.2008.11.017 ↗
65. Influence of carbon target power on the tribological and electrochemical properties of NbMoSiC composite films in seawater10.1016/j.surfcoat.2023.129950 ↗
66. Laboratory investigation of microstructure, strength and durability of cemented soil with Nano-SiO2 and basalt fibers in freshwater and seawater environments10.1016/j.conbuildmat.2023.132008 ↗
67. The effects of adding aluminum on crystal structure, mechanical, oxidation resistance, friction and wear properties of nanocomposite vanadium nitride hard films by reactive magnetron sputtering10.1016/j.matchemphys.2018.05.061 ↗
68. Preparation of new materials by ethylene glycol modification and Al (OH)3 coating NZVI to remove sulfides in water10.1016/j.jhazmat.2020.122049 ↗
69. Y. Wang, Z. Jia, J. Ji, W. Lu, D. Liu. Tribo-oxidation mechanism of gradient nanostructured Inconel 625 alloy during high-temperature wear. Wear. 558-559(2024): 205581.10.1016/j.wear.2024.205581 ↗