journal article·2025-08Open access

Water–alcohol solution as a diluent for phenolic resin to improve the toughness and pore size distribution of carbon paper

Shuangshuang Zhao, Ling Meng, Hailong Li, Mengru Liu, Chenying Song, Dong Chen

Ceramics International· Volume 51· Issue 19

Abstract

Carbon paper is the preferred material for proton exchange membrane fuel cell gas-diffusion layers. Enhancing the toughness of carbon paper and improving the uniformity of its pore structure are crucial for cost reduction and performance optimization in fuel cells. In this study, carbon papers were prepared using a water-alcohol solution as a diluent of phenolic resin . The evolution of the resin impregnation solution and its influence on the toughness and pore size distribution of the carbon paper were systematically investigated. The results indicated that the resin impregnation solution initially formed a liquid film within the pore structure of the preforms, with higher anhydrous ethanol content enhancing the stability of the liquid film . Compared to pure ethanol, the water–alcohol solution improved the viscosity and surface tension of the resin impregnation solution, resulting in 78.9 % of the pore sizes being distributed within the 20–40 μm range, thereby enhancing the uniformity of pore structure of carbon paper. Using a water-alcohol solution as a diluent enhances the toughness of the carbon paper by 148.67 %. The improvement is attributed to the formation of a structure resembling “beaded fibers”, which promotes crack deflection and branching, thereby increasing energy dissipation during fracture propagation . The fuel cells achieved a maximum power density of 673.96 mW/cm 2 and a current density of 1.68 A/cm 2 respectively, demonstrating significant improvements in both toughness and fuel cell performance .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Material Properties and Processing · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. PEM fuel cell electrodes10.1016/j.jpowsour.2003.12.055 ↗
2. Structural and physical properties of GDL and GDL/BPP combinations and their influence on PEMFC performance10.1002/fuce.200400022 ↗
3. Insights into the role of wettability in cathode catalyst layer of proton exchange membrane fuel cell; pore scale immiscible flow and transport processes10.1016/j.jpowsour.2017.03.012 ↗
4. Influence of various carbon nano-forms as supports for Pt catalyst on proton exchange membrane fuel cell performance10.1016/j.jpowsour.2017.05.117 ↗
5. Recent advances in materials for fuel cells10.1146/annurev.matsci.33.022802.094122 ↗
6. Gas diffusion layer for proton exchange membrane fuel cells—A review10.1016/j.jpowsour.2009.04.005 ↗
7. A review of gas diffusion layer in PEM fuel cells: materials and designs10.1016/j.ijhydene.2011.12.148 ↗
8. Enhanced triple-phase interface in PEMFC by proton conductor absorption on the Pt catalyst10.1021/acsaem.2c02992 ↗
9. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
10. Patrick · 2003
11. Key materials and technologies for fuel cells10.1016/j.pnsc.2020.11.004 ↗
12. M.F. Mathias, J. Roth, J. Fleming, W. Lehnert, Diffusion Media Materials and Characterisation, Handbook of Fuel Cells2010.10.1002/9780470974001.f303046 ↗
13. A new method for optimal fabrication of carbon composite paper as gas diffusion layer used in proton exchange membrane of fuel cells10.1016/j.jelechem.2018.03.009 ↗
14. Stochastic microstructure reconstruction of a binder/carbon fiber/expanded graphite carbon fiber paper for PEMFCs applications: mass transport and conductivity properties10.1149/2.0331907jes ↗
15. Impact of PTFE content and distribution on liquid–gas flow in PEMFC carbon paper gas distribution layer: 3D lattice boltzmann simulations - ScienceDirect10.1016/j.ijhydene.2016.02.159 ↗
16. Processing of carbon composite paper as electrode for fuel cell10.1016/j.jpowsour.2006.05.053 ↗
17. The quantitative analysis for the formation of carbon fiber paper and its influencing factors10.1007/s10853-020-04465-1 ↗
18. Characteristics of the carbon paper heat-treated to different temperatures and its influence on the performance of PEM fuel cell10.1016/j.electacta.2007.01.041 ↗
19. Boron-catalytic graphitization boosting the production of high-performance carbon paper at a moderate temperature10.1002/adem.202100305 ↗
20. Solvothermal degradation and reuse of carbon fiber reinforced boron phenolic resin composites10.1016/j.compositesb.2021.109011 ↗
21. A novel graphite/phenolic resin bipolar plate modified by doping carbon fibers for the application of proton exchange membrane fuel cells10.1016/j.pnsc.2020.10.012 ↗
22. Carboxyl-terminated butadiene-acrylonitrile-modified carbon paper for use of gas diffusion layer in PEM fuel cells10.1016/j.ijhydene.2015.03.138 ↗
23. Graphene oxide reinforced ultra-thin carbon paper used for fuel cells and the mechanisms of reinforcement10.1016/j.ijhydene.2017.02.120 ↗
24. Effect of grain size of graphite powder in carbon paper on the performance of proton exchange membrane fuel cell10.1016/j.jpowsour.2022.232012 ↗
25. Multiwall carbon nanotubes tailored porous carbon fiber paper-based gas diffusion layer performance in polymer electrolyte membrane fuel cell10.1016/j.renene.2019.04.096 ↗
26. Carbon fiber paper modified with carbon nanotube for proton exchange membrane fuel cell10.4028/www.scientific.net/AMR.139-141.76 ↗
27. Configuring the porosity and microstructure of carbon paper electrode using pore formers and its influence on the performance of PEMFC10.1021/acs.energyfuels.0c02838 ↗
28. Wettability model for water-ethanol binary mixture droplet on roughened low-surfaceenergy solids10.1016/j.ijmultiphaseflow.2021.103569 ↗
29. Theoretical model of droplet wettability on a low-surface-energy solid under the influence of gravity
30. Hydration of liquid ethanol probed by raman spectra
31. Study on the elements of the fluorescence spectra emitted from ethanol-water mixture
32. Interaction mechanisms between fibers and bubbles during foam forming10.1016/j.colsurfa.2024.134432 ↗
33. Role of sizing agent on the microstructure morphology and mechanical properties of mineral-impregnated carbon-fiber (MCF) reinforcement made with geopolymers
34. Beaded fiber composites—Stiffness and strength modeling10.1016/j.jmps.2018.12.020 ↗
35. Fracture toughness and toughening mechanisms in graphene platelet reinforced Si3N4 composites10.1016/j.scriptamat.2012.02.009 ↗
36. D. Askeland, P. Phule, 阿斯克兰德, Phule, Essentials of Materials Science and Engineering, Essentials of Materials Science and engineering 2005.
37. Effect of concentration of water-soluble phenolic resin on the properties of carbon paper for gas diffusion layer10.1016/j.ceramint.2023.09.337 ↗
38. Synergistically improve the strength and porosity of carbon paper by using a novel phenol formaldehyde resin modified with cellulose nanofiber for proton exchange membrane fuel cells10.1016/j.ijbiomac.2024.134205 ↗
39. Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method10.1016/j.ijhydene.2024.05.150 ↗
40. The influence of the pore size and its distribution in a carbon paper electrode on the performance of a PEM fuel cell10.1016/j.electacta.2008.07.029 ↗
41. The effect of the backing layer design on the mass transfer in a proton exchange membrane fuel cell10.1016/j.enconman.2022.116086 ↗
42. Influence of clamping pressure on contact pressure uniformity and electrical output performance of proton exchange membrane fuel cell10.1016/j.apenergy.2023.122021 ↗
43. Hierarchy carbon paper for the gas diffusion layer of proton exchange membrane fuel cells10.1016/j.jpowsour.2008.11.046 ↗