journal article·2025-08Open access

Influence of secondary pre-sintering on sintering shrinkage and piezoelectric properties of PLSBZT multilayer ceramic actuators

Jingheng Guo, Ruihong Liang, Lizhi Shi, Zhengran Chen, Shuai Chen, Zhiyong Zhou

Ceramics International· Volume 51· Issue 20

Abstract

Multilayer ceramic actuators are characterized by high resolution, low driving voltage, and potential for miniaturization, making them ideal candidates for precision control and sensing applications. To reduce the shrinkage of ceramics and to obtain multilayer ceramics with good interfacial bonding, we designed a secondary sintering process to prepare Pb 0 . 931 La 0 . 006 Sr 0 . 03 Ba 0 . 03 (Zr 0 . 535 Ti 0 . 465 )O 3 (PLSBZT) piezoelectric ceramics and prepared multilayer ceramic actuators by casting and co-firing process. The ceramic powder with secondary synthesis temperature of 1050 °C reaction more fully, its powder particle size and density increased, resulting in ceramic discs with reduced sintering shrinkage of about 3 %, and has a good performance, including d 33 = 534 pC/N, k p = 0.657, tanδ = 1.35 %, T c = 294 °C, ε r = 2143, and P r = 36.07 μC/cm 2 . The multilayer ceramics without secondary synthesis showed significant delamination due to high sintering shrinkage. However, the multilayer ceramics with secondary synthesis temperature of 1050 °C showed 6 % less shrinkage and good interfacial bonding with interfacial bonding of about 10.9 MPa. The multilayer ceramic actuator, measuring 7 × 7 × 20 mm 3 , achieved a displacement of 29.3 μm, with hysteresis below 18 %, when driven at a voltage of 150 V (2 kV/mm). Preparation of PLSBZT multilayer ceramic actuators by secondary pre-sintering reduces ceramic sinteri ng shrinkage and gets a good combination of interfaces, which is important for saving the cost of actuator optimization and improving its reliability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Electrical and Thermal Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Piezoelectric materials for energy harvesting and sensing applications: roadmap for future smart materials10.1002/advs.202100864 ↗
2. Optimizing piezoelectric properties and temperature stability via Nb2O5 doping in PZT-Based ceramics10.1016/j.ceramint.2023.09.295 ↗
3. Fabrication and characterization of low temperature sintered hard piezoelectric ceramics for multilayer piezoelectric energy harvesters10.1016/j.ceramint.2021.02.239 ↗
4. Review on piezoelectric, ultrasonic, and magnetoelectric actuators10.1142/S2010135X12300010 ↗
5. A low-cost multilayer piezoelectric actuator for ultrasonic motor stator driving fabricated by a low-temperature co-fired ceramic process10.1016/j.ceramint.2022.10.103 ↗
6. Effect of MnO2 on the piezoelectric properties of the 0.75Pb(Zr0.47Ti0.53)O3–0.25Pb(Zn1/3Nb2/3)O3 ceramics10.1111/j.1551-2916.2010.03888.x ↗
7. Large strain induced by the alignment of defect dipoles in (Bi3+,Fe3+) co-doped Pb(Zr,Ti)O3 ceramics10.1016/j.scriptamat.2017.08.013 ↗
8. Giant piezoelectric coefficient of PNN-PZT-based relaxor piezoelectric ceramics by constructing an R-T MPB10.1016/j.ceramint.2021.01.079 ↗
9. Ultrahigh strain in PZ-PT-BNT piezoelectric ceramic10.1016/j.ceramint.2023.11.135 ↗
10. Achieving large strain and excellent temperature stability in PT-PZ-LST piezoelectric ceramics10.1016/j.ceramint.2023.12.032 ↗
11. Excellent strain and temperature stability in PNT-PZT multilayer textured ceramics10.1016/j.jeurceramsoc.2024.02.053 ↗
12. Control of shrinkage on the behavior of co-firing of ferrite and varistor multi-layers composite with organic content10.1007/s10832-008-9543-x ↗
13. The origin of interfacial delamination in Au/ceramic cofired LTCC structure10.1016/j.ceramint.2021.09.025 ↗
14. Effect of mismatched sintering kinetics on camber in a low-temperature cofired ceramic package10.1111/j.1151-2916.1993.tb08311.x ↗
15. Thermally induced delamination of symmetrically graded multilayers, (n.d.). https://ceramics.onlinelibrary.wiley.com/doi/epdf/10.1111/j.1151-2916.2002.tb00184.x (accessed December 24, 2024).
16. Effect of heating rate on the shrinkage and microstructure of liquid phase sintered SiC ceramics10.1016/j.ceramint.2016.08.039 ↗
17. Effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials10.1016/j.jallcom.2016.03.237 ↗
18. Application of Ag–ceramic composite electrodes to low firing piezoelectric multilayer ceramic actuators10.1007/s10832-007-9181-8 ↗
19. Tape casting of ferroelectric, dielectric, piezoelectric and ferromagnetic materials10.1016/S0955-2219(03)00552-1 ↗
20. Ceramic tape casting: a review of current methods and trends with emphasis on rheological behaviour and flow analysis10.1016/j.mseb.2016.07.011 ↗
21. Guo
22. Influence of calcination and sintering temperatures on dielectric and magnetic properties of Pb(Fe0.5Nb0.5)O3 ceramics synthesized by the solid state method10.1016/j.ceramint.2021.05.055 ↗
23. Effect of synthesis temperature on crystal structure, optical and magnetic properties of SmCuO3-δ ceramic phosphor
24. High thermal stability in PLZST anti-ferroelectric energy storage ceramics with the coexistence of tetragonal and orthorhombic phase10.1016/j.jeurceramsoc.2018.08.003 ↗
25. Processing of thermally stable doped perovskite PZT ceramics10.1016/S0924-0136(01)00631-8 ↗
26. Ultra-high-temperature piezoelectric responses and ultra-high thermal stability of piezoelectricity in ceramic PbZr0.54Ti0.46O310.1111/jace.18388 ↗
27. Enhanced transduction coefficient in piezoelectric PZT ceramics by mixing powders calcined at different temperatures10.1016/j.jeurceramsoc.2020.02.064 ↗
28. Influence of presintering temperature on magnesium aluminate spinel transparent ceramics fabricated by solid-state reactive sintering10.1111/ijac.13888 ↗
29. Real‐time capturing of microscale events controlling the sintering of lead‐free piezoelectric potassium‐sodium niobate10.1002/smll.202106825 ↗
30. Optimization of piezoelectric properties of 0.7BiFeCo0.004O3-0.3BaTiO3 ceramics by adjusting dwell time during the sintering process
31. Microstructural characteristics and electrical properties of xPb(Mg1/3Ta2/3)O3–(0.1−x)Pb(Mn1/3Sb2/3)O3–0.9Pb(Zr0.52Ti0.48)O3 high power piezoelectric ceramics10.1016/j.mseb.2009.05.023 ↗
32. Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics10.1016/j.jeurceramsoc.2017.02.018 ↗
33. Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties
34. Dynamic hysteresis model and control methodology for force output using piezoelectric actuator driving10.1109/ACCESS.2020.3037216 ↗
35. Low sintering temperature, large strain and reduced strain hysteresis of BiFeO3–BaTiO3 ceramics for piezoelectric multilayer actuator applications10.1016/j.ceramint.2021.08.008 ↗