journal article·2025-09Open access

Development of composite coatings by ultrasonic-assisted jet electrodeposition method: Impact of ultrasonic power and Al2O3 concentration

Huigui Li, Yuanlong Chen, Xuegeng Yang, Kerstin Eckert, Wei Jiang

Ceramics International· Volume 51· Issue 22

Abstract

Ni-Co alloy-based nanocomposite coatings are widely used in the engineering field due to their excellent physical and chemical properties. The co-deposition of Al 2 O 3 -reinforced Ni-Co alloy was successfully achieved using ultrasonic-assisted jet electrodeposition. The effects of ultrasonic power and Al 2 O 3 concentration on deposition morphology, surface roughness, adhesion, microhardness, abrasion resistance and self-corrosion properties of Ni-Co coatings were systematically investigated. A favorable Al 2 O 3 concentration of approximately 3 g/L in the electrolyte and an ultrasonic power density of 8 W cm -2 were found to result in improved micro-hardness, adhesion, wear resistance, corrosion resistance, and the highest Al 2 O 3 incorporation within the tested range. Under these conditions, the coating exhibited a micro-hardness of 623 HV, an adhesion strength of 36.8 N, a wear track width of 346.8 μm, and a corrosion current density of 5.20 μA·cm -2 , indicating excellent comprehensive properties. This study provides valuable insights for the development of environmentally friendly industrial alternatives to conventional hard chromium coatings and demonstrates promising potential for applications in marine engineering.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Electrophoretic Deposition in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A review of electrodeposited Ni-Co alloy and composite coatings: microstructure, properties and applications10.1016/j.surfcoat.2019.04.079 ↗
2. Electrodeposited Ni-Co alloy-particle composite coatings: a comprehensive review10.1016/j.surfcoat.2019.125153 ↗
3. Effect of particle size and co-deposition technique on hardness and corrosion properties of Ni-Co/SiC composite coatings10.1016/j.surfcoat.2012.05.122 ↗
4. Electrodeposition of composite coatings containing nanoparticles in a metal deposit10.1016/j.surfcoat.2005.11.123 ↗
5. The electrodeposition of composite coatings: diversity, applications and challenges
6. A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying coatings technology10.1179/0020296713Z.000000000161 ↗
7. Fabrication of Ni-Co-SiC composite coatings by pulse electrodeposition-effects of duty cycle and pulse frequency10.1016/j.surfcoat.2012.11.059 ↗
8. Effect of SiC particle size on structures and properties of Ni-SiC nanocomposites deposited by magnetic pulse electrodeposition technology10.1016/j.ceramint.2019.06.283 ↗
9. Ni-TiN and ni-co-tin composite coatings for corrosion protection: fabrication and electrochemical characterization10.1016/j.jallcom.2017.11.169 ↗
10. Ni-Co-TiO2 nanocomposite coating prepared by pulse and pulse reversal methods using acetate Bath10.1016/j.apsusc.2010.06.029 ↗
11. Nanostructured Ni-WC-Co composite coatings fabricated by electrophoretic deposition10.1016/j.surfcoat.2005.06.025 ↗
12. Cr2O3 nanoparticles: a promising candidate to improve the mechanical properties and corrosion resistance of Ni-Co alloy coatings10.1016/j.ceramint.2018.01.044 ↗
13. Preparation and tensile properties of Al2O3/Ni-Co nanocomposites10.1016/S1003-6326(11)61609-9 ↗
14. Ultra-strong nanostructured Co-Ni-V medium entropy alloy thin film designed by interface strengthening10.1016/j.tsf.2021.138866 ↗
15. Growth of well-aligned carbon nanotubes on a large area of Co-Ni co-deposited silicon oxide substrate by thermal chemical vapor deposition10.1016/S0009-2614(00)00521-2 ↗
16. Elemental anisotropic growth and atomic-scale structure of shape-controlled octahedral pt-ni-co alloy nanocatalysts10.1021/acs.nanolett.5b03057 ↗
17. Review on sol-gel derived coatings: process, techniques and optical applications
18. Microstructure, hardness, and tribological properties of Ni-Co/SiO2 nanocomposite coating produced through pulsed current electrodeposition10.1016/j.ceramint.2024.08.457 ↗
19. Ultrasonic-assisted electrodeposition of Ni-Cu/TiN composite coating from sulphate-citrate bath: structural and electrochemical properties10.1016/j.ultsonch.2019.104680 ↗
20. The influence of pulse plating parameters on microstructure and properties of Ni-W-Si3N4 nanocomposite coatings10.1016/j.ceramint.2016.08.171 ↗
21. One-step preparation of high performance Ni-MoS2 self-lubricating coatings via jet electrodeposition on additive manufactured aluminum alloy
22. Tunable wettability of jet electrodeposited micro-nano structures modified by laser radiation10.1016/j.surfcoat.2022.128763 ↗
23. Fabrication of superhydrophobic stainless-steel mesh for oil-water separation by jet electrodeposition10.1016/j.colsurfa.2022.129434 ↗
24. Efficient fabrication and characterization of Ni-Fe-WC composite coatings with high corrosion resistance10.1016/j.jmrt.2021.11.145 ↗
25. A novel superhydrophobic Ni/Nip coating fabricated by magnetic field induced selective scanning electrodeposition10.1016/j.apsusc.2019.05.335 ↗
26. Effect of current density on properties of Ni-P-Al2O3-PTFE nanocomposite coatings by jet electrodeposition10.1007/s00170-023-11088-8 ↗
27. The impact of an ultrasonic standing wave on the sorption behavior of proteins: investigation of the role of acoustically induced non-spherical bubble oscillations10.1016/j.jcis.2023.12.148 ↗
28. Effect of current density and agitation modes on the structural and corrosion behavior of Ni/diamond composite coatings10.1016/j.jmrt.2021.03.084 ↗
29. Ultrasonic-assisted electrodeposition of Ni/diamond composite coatings and its structure and electrochemical properties10.1016/j.ultsonch.2021.105475 ↗
30. Experimental investigations into ultrasonic-assisted jet electrodeposition process
31. Fabrication of nano-sized grain micro features using ultrasonic-assisted jet electrodeposition with pulsed current supply
32. Preparation of Ni-B composite coating doped with hydrothermally modified synthetic WC@MoS2 powders via ultrasonic-assisted jet electrodeposition for corrosion protection
33. Jet pulse electrodeposition and characterization of Ni-AlN nanocoatings in presence of ultrasound10.1016/j.ceramint.2017.12.121 ↗
34. Preparation of Ni-SiC composite coatings by magnetic field-enhanced jet electrodeposition10.1016/j.jallcom.2018.05.097 ↗
35. Ultrasound-assisted electrodeposition of composite coatings with particles10.1016/j.surfcoat.2014.06.023 ↗
36. Ultrasound-assisted electrodeposition of nickel: effect of ultrasonic power on the characteristics of thin coatings10.1016/j.surfcoat.2015.01.020 ↗
37. Ni-W/ZrO2 nanocomposites obtained by ultrasonic DC electrodeposition10.1016/j.matdes.2015.04.049 ↗
38. Friction and wear behavior of electroless Ni-P-W coating exposed to elevated temperature10.1016/j.surfin.2018.12.007 ↗
39. The effect of ultrasonic power on high temperature wear and corrosion resistance for Ni based alloy composite coatings10.1016/j.colsurfa.2022.130345 ↗
40. Synthesis and characterization of Ni-Co/SiC nanocomposite coatings using sediment co-deposition technique10.1016/j.jallcom.2013.01.122 ↗
41. Corrosion resistance of Ni-Co alloy and Ni-Co/SiC nanocomposite coatings electrodeposited by sediment codeposition technique10.1016/j.apsusc.2014.04.037 ↗
42. Synthesis and properties of a novel Ni-Co and Ni-Co/ZrO2 composite coating by DC electrodeposition10.1016/j.jallcom.2019.153258 ↗
43. Estimating nanoparticle size from diffraction measurements10.1107/S0021889800010888 ↗
44. Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition10.1016/j.ultsonch.2019.104858 ↗
45. Preparation of Ni-SiC nano-composite coating by rotating magnetic field-assisted electrodeposition10.1016/j.jmapro.2020.07.045 ↗
46. Tribological behavior and wear mechanism of Ni-B composite coatings strengthened with doping WC@MoS2 powders
47. Tribological behaviour of Ni/WC-MoS2 composite coatings prepared by jet electrodeposition with different nano-MoS2 doping concentrations10.1016/j.engfailanal.2022.106934 ↗
48. Influences of Al particles on structure and properties of Ni-Al composite coatings with nanoscale twin structure10.1016/j.ceramint.2024.07.108 ↗
49. Preparation of Ni coating on NdFeB by magnetic jet electrodeposition
50. NaCl-induced hot-corrosion behavior and mechanism of TiSiCN/Ag nanocomposite coatings by arc ion plating10.1016/j.corsci.2023.111406 ↗
51. Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy10.1016/j.cej.2021.131198 ↗
52. Superhydrophobic and anticorrosion Ni-B/WC@MoS2 composite coatings deposited via jet electrodeposition assisted with ultrasonics10.1016/j.jtice.2024.105349 ↗
53. Heat treatment of ultrasonic electrodeposited Ni-W/ZrO2 nanocomposites10.1016/j.surfcoat.2020.125779 ↗
54. Ni-SiC composite coatings with improved wear and corrosion resistance synthesized via ultrasonic electrodeposition10.1016/j.ceramint.2020.12.076 ↗