TEM and zeta potential titration as suitable techniques for investigating the joining of modified ceramic surfaces
Source abstract
Abstract
Transmission Electron Microscopy (TEM-EDS) and Zeta potential titration of ceramic surfaces allowed researchers to go inside their adhesion mechanism when joined with an adhesive. The case study concerned the plasma Corona treatment to improve the joint strength between SiC surfaces joined with an epoxy adhesive. The formidable mechanical and chemical properties inherent to silicon carbide pose challenges in applying conventional methods like mechanical machining and wet etching for surface texturing. Exploring alternative strategies, plasma Corona treatment which is an Atmospheric Pressure Plasmas (APPs) process emerges as a potential solution. The mechanism of chemical interaction and mechanical interlocking between plasma-treated surfaces and the epoxy adhesive used for the joining was never explored in detail and proven. The presence of layers with different crystallographic natures and chemical compositions was assessed by TEM-EDS: an amorphous silica layer was produced by the corona activation treatment and it created a mechanical anchoring system when penetrated by the adhesive. The zeta potential titration as a function of pH evidenced that untreated SiC had a surface with amphoteric functional groups, while the Corona treatment induced the formation of surface functional groups (OH) with a strong acidic behavior on SiC. The investigated epoxy adhesive exposed a prevalence of basic amino groups. Zeta potential titration curves highlighted the chemical interaction between the treated SiC surfaces and the epoxy adhesive: the large electrostatic attraction between the OH groups of the treated SiC and the amino groups of the epoxy adhesive had a role in the mechanical strength of the joining. TEM and Zeta potential titration can be proposed as suitable techniques to evaluate the effectiveness of the plasma corona discharge system in modifying the surface of SiC and to solidify its standing in comparison to other established surface modification techniques to improve SiC-based joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A review on the joining of SiC for high-temperature applications10.1007/s43207-020-00021-4 ↗
2. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): joining processes, joint strength, and interfacial behavior10.1007/s40145-018-0297-x ↗
3. Microstructure and mechanical properties of SiC–SiC joints joined by spark plasma sintering10.1016/j.ceramint.2016.06.049 ↗
4. Radiation-tolerant joining technologies for silicon carbide ceramics and composites10.1016/j.jnucmat.2013.10.002 ↗
5. Expanding the scope of SiC ceramics through its surface modification by different methods10.1016/j.surfcoat.2022.128263 ↗
6. Material surface preparation techniques
7. Effect of pulsed laser irradiation on the SiC surface10.1111/ijac.12655 ↗
8. A plasma pre-treatment to improve adhesion on SiC and Si3N4
9. Surface modification of SiC to improve joint strength via a Corona plasma treatment10.1016/j.ceramint.2022.04.344 ↗
10. Advances in modifications and high-temperature applications of silicon carbide ceramic matrix composites in aerospace: a focused review10.1016/j.jeurceramsoc.2021.03.051 ↗
11. Review on adhesives and surface treatments for structural applications: recent developments on sustainability and implementation for metal and composite substrates10.3390/ma13245590 ↗
12. Preparation, ablation behavior and mechanism of C/C-ZrC-SiC and C/C-SiC composites10.1016/j.ceramint.2018.01.125 ↗
13. Etching of SiC–SiC-composites by a laser-induced plasma in a reactive gas10.1016/j.ceramint.2021.09.084 ↗
14. DLS and zeta potential – what they are and what they are not?10.1016/j.jconrel.2016.06.017 ↗
15. Paar
16. Luxbacher · 2014
17. How do wettability, zeta potential, and hydroxylation degree affect the biological response of biomaterials?10.1016/j.msec.2016.12.107 ↗
18. Henkel. Safety Data Sheet - LOCTITE EA 9321 AERO PART A QT.
19. Henkel Safety Data Sheet - LOCTITE EA 9321 AERO PART B PT.
20. Characterization of silicon oxide films grown at room temperature by point-to-plane corona discharge10.1007/BF02817687 ↗
21. Controlling the defects and transition layer in SiO2 films grown on 4HSiC via direct plasma-assisted oxidation
22. Prevention of damage caused by corona discharge-generated reactive oxygen species under electrostatic aerosol-to-hydrosol sampling10.1016/j.jhazmat.2019.121477 ↗
23. Further characterization of the surface properties of the SiC particles through complementarity of XPS and IGC-ID techniques10.1016/j.bsecv.2018.04.003 ↗
24. Zeta potential as a tool to characterize plasma oxidation of carbon fibers10.1006/jcis.1997.5007 ↗
25. Controlling off-Axis stiffness and stress-relaxation of carbon fiber-reinforced polymer using alumina nanoparticles10.1177/0021998317748466 ↗
26. Analysis and testing of bisphenol A—free bio-based tannin epoxy-acrylic adhesives10.3390/polym8040143 ↗
27. Structural adhesive bonding of sintered silicon carbide (SSiC) subjected to thermal treatment in air atmosphere10.1163/156856199X00424 ↗