Decorated cenosphere surface with bioreduced silver nanoparticles for environmental applications
Source abstract
Abstract
Cenospheres (CF) are hollow spherical particles primarily composed of silica (SiO 2 ) and alumina (Al 2 O 3 ), known as aluminosilicate ceramic microspheres. In this study, CF were fractionated into the four size ranges (40–80 μm, 80–125 μm, 125–160 μm, 160–200 μm), purified, and activated using piranha solution (PS). Acid treatment activation was followed by the CF functionalization with biosynthesized silver colloidal nanoparticles (AgNPs). Silver integration was confirmed using elemental analysis (5.8–7.1 wt% of Ag), and electron microscopy revealed AgNPs (∼45 nm) unevenly distributed and locate at surface defects. X-ray diffraction (XRD) analysis confirmed the presence of quartz and mullite phases in both raw and modified CF, indicating structural stability during processing. Sound absorption tests revealed that while larger CF particles—especially the 160–200 μm fraction—initially demonstrated the highest noise reduction coefficient (NRC), with a maximum NRC of 0.210 at 80 mm powder bed heigh, the modification with AgNP significantly diminished the dependency of sound absorption performance on particle size. Ag-modified samples showed NRC values, CF with a particle size fraction pf 160–200 μm: 0.158, at 80 mm, confirming uniform acoustic performance. Mechanical stiffness, expressed by bulk modulus, increased with both particle size and powder bed density, reaching a maximum of 64.26 MPa for CF_160200_2 PS_Ag. Leaching tests under static, dynamic, and rotation conditions revealed limited silver release, with only slightly increased leaching observed for larger particles under rotation. Silver release from CF_160200_2 PS_Ag was 0.007 wt% (static), 0.008 wt% (dynamic), and 0.010 wt% (rotation). Overall, Ag release remained low, confirming high material stability. These results show that silver-modified CF retain their structural and chemical integrity, offer tunable acoustic and mechanical properties, and show excellent potential for long-term use in environmental remediation, sound insulation, and catalytic applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Nanomaterials in Catalysis · Geochemistry and Elemental Analysis · Nanoparticles: synthesis and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Surface modification methods of ceramic filler in ceramic-carbon fibre composites for bioengineering applications – a systematic review10.1515/rams-2020-0024 ↗
2. Cenospheres: a review10.1016/j.fuel.2017.06.059 ↗
3. Recent advances in methods for recovery of cenospheres from fly ash and their emerging applications in ceramics, composites, polymers, and environmental cleanup10.3390/cryst11091067 ↗
4. A review on methods of cenosphere separation from fly ash10.4028/p-q3DAmX ↗
5. Rheology, shrinkage, mechanical properties and microstructure of ultra-light-weight concrete with fly ash cenospheres
6. Effect of cenospheres on the engineering properties of lightweight cementitious composites: a comprehensive review
7. Modified cenospheres as non-sacrificial pore-forming agent for porous mullite ceramics10.1016/j.ceramint.2019.07.189 ↗
8. Influence of chemical composition of fly-ash cenospheres on their grain size10.1007/s13762-019-02512-2 ↗
9. Preparation and sound absorption performance of low-carbon fly ash cenosphere plates10.1002/ces2.10204 ↗
10. Modified cenospheres as an adsorbent for the removal of disperse dyes10.1155/2015/349254 ↗
11. Application of fly ash as an adsorbent for removal of air and water pollutants10.3390/app8071116 ↗
12. Fly ash-based adsorbent for adsorption of heavy metals and dyes from aqueous solution: a review10.1016/j.jmrt.2021.07.140 ↗
13. Investigation of interactions in the cenospheres-electrolyte system10.1088/1742-6596/1546/1/012116 ↗
14. Cenospheres-reinforced PA-12 composite: preparation, physicochemical properties, and soaking tests10.3390/polym14122332 ↗
15. Fly-ash cenosphere as non-porous Ag-nanoparticle support for epoxidation of styrene10.1002/slct.202401003 ↗
16. Effects of neat and silver-coated fly ash cenospheres on the properties of styrene-butadiene-styrene block copolymer composites obtained by a solution mixing method
17. Tailored fly ash materials: a recent progress of their properties and applications for remediation of organic and inorganic contaminants from water10.1016/j.jwpe.2020.101910 ↗
18. A critical review on adsorption and recovery of fluoride from wastewater by metal-based adsorbents10.1007/s11356-022-23416-8 ↗
19. Removal of disperse orange and disperse blue dyes present in textile mill effluent using zeolite synthesized from cenospheres10.2166/wst.2021.216 ↗
20. From biotechnology principles to functional and low-cost metallic bionanocatalysts10.1016/j.biotechadv.2018.11.012 ↗
21. Novel biogenic silver nanoparticles used for antibacterial effect and catalytic degradation of contaminants10.1007/s11164-019-04075-w ↗
22. Biogenic silver nanoparticles: what we know and what do we need to know?10.3390/nano11112901 ↗
23. Biocompatible silver nanoparticles from apricot kernel skin: a green synthesis approach to antibacterial and antiangiogenic therapies
24. Silver nanoparticles: facile synthesis and their catalytic application for the degradation of dyes10.1039/C5RA02909K ↗
25. Green synthesis of silver nanoparticles from verbena officinalis l.: characterization and antibacterial efficacy10.14719/pst.5061 ↗
26. Phytosynthesis of Ag, ZnO and ZrO2 nanoparticles using linden: changes in their physical-chemical nature over time10.1166/jnn.2019.15854 ↗
27. Silver/chitosan antimicrobial nanocomposites coating for medical devices: comparison of nanofiller effect prepared via chemical reduction and biosynthesis10.1166/jnn.2019.15863 ↗
28. Acoustic energy absorption properties of fibrous materials: a review10.1016/j.compositesa.2017.07.002 ↗
29. The performance of interior building sound-absorbing material of cross-sectional oak (Quercus spp.) in combination with disposable mask waste (DMW)10.1016/j.apacoust.2023.109802 ↗
30. Sound absorption measurements for evaluating dynamic physical properties of a powder bed10.1016/0032-5910(93)85005-T ↗
31. ISO 10534-2, acoustics-determination of sound absorption coefficient and impedance in impedance tubes-Part 2: transfer-function method
32. Acoustic absorption behaviour of an open-celled aluminium foam10.1088/0022-3727/36/3/312 ↗
33. Composition and morphology of fly ash cenospheres produced from the combustion of Kuznetsk coal10.1021/ef400754c ↗
34. Structural characterizations of aluminosilicates in two types of fly ash samples from Shanxi Province, North China10.3390/min9060358 ↗
35. Investigation of the coal fly ashes using IR spectroscopy10.1016/j.saa.2014.05.052 ↗
36. Infrared and Raman spectroscopy of mullite ceramics synthesized from fly ash and kaolin10.3390/min13070864 ↗
37. Study of cadmium adsorption onto calcite using full factorial experiment design10.5004/dwt.2017.21079 ↗
38. Effect of milling atmosphere on stability and surface properties of ZnO/vermiculite hybrid nanocomposite powders
39. Antonowicz · 2024