journal article·2025-12

Adsorption-mediated growth of hexagonal bipyramidal BeO via thermal decomposition for enhanced ceramic applications

Lihua Wang, Jianbo Guan, Qing Guo, Qihou Li, Longgong Xia

Ceramics International· Volume 51· Issue 29
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. High‐pressure and high‐temperature crystal chemistry of beryllium oxide10.1063/1.336756 ↗
2. Fabrication of beryllium oxide based fully ceramic microencapsulated nuclear fuels with dispersed TRISO particles by pressureless sintering method10.1016/j.jnucmat.2023.154798 ↗
3. Thermal conductivity and prospects for application of BeO ceramic in electronics10.1007/s10717-015-9694-6 ↗
4. Petrovic · 2020
5. Enhanced properties of SAW device based on beryllium oxide thin films10.3390/cryst11040332 ↗
6. Atomic-layer deposition of crystalline BeO on SiC10.1016/j.apsusc.2018.09.239 ↗
7. Low temperature growth of beryllium oxide thin films prepared via plasma enhanced atomic layer deposition10.1016/j.apsusc.2021.151405 ↗
8. X-ray photoelectron spectroscopy investigation of the valence band offset at beryllium oxide-diamond interfaces10.1016/j.diamond.2019.107647 ↗
9. Numerical assessment of beryllium oxide as an alternative material for micro heat exchangers10.1016/j.ceramint.2020.04.263 ↗
10. Thermo-hydraulic performance in ceramic-made microchannel heat sinks with an optimum fin geometry10.1016/j.csite.2022.102230 ↗
11. Evidence for hydrogen two-level systems in atomic layer deposition oxides10.1063/1.4826253 ↗
12. Three newly developed BeO-based OSL dosimeters10.1016/j.jlumin.2021.118528 ↗
13. A correlation study on the TL, OSL and ESR signals in commercial BeO dosimeters yielding intense transfer effects10.1016/j.jlumin.2019.116533 ↗
14. 4 - BeO ceramics
15. Improving the water-resistance of MgO-based metal-insulator-metal capacitors by inserting a BeO thin film grown via atomic layer deposition10.1039/D2TC00595F ↗
16. Re-deposition of ITER-grade be on plasma gun facility QSPA-be: Characterization & plasma cleaning
17. Codeposition of deuterium ions with beryllium oxide at elevated temperatures10.1016/S0022-3115(00)00286-5 ↗
18. BeO utilization in reactors for the improvement of extreme reactor environments - a review
19. Thermal conductivity of polyurethane sheets containing beryllium oxide nanofibers10.1039/D2RA04666K ↗
20. Fabrication of beryllium oxide based fully ceramic microencapsulated nuclear fuels with dispersed TRISO particles by pressureless sintering method10.1016/j.jnucmat.2023.154798 ↗
21. Fabrication of UO2-BeO composite pellets with superior thermal conductivity based on multi-parameter theoretical analyses10.1016/j.jnucmat.2020.152533 ↗
22. Transient fuel performance analysis of UO2-BeO fuel with composite SiC coated with cr cladding based on multiphysics method10.1007/s41365-023-01344-7 ↗
23. Study on the mechanical properties at high temperatures and relevant mechanism of beryllium oxide ceramics10.1016/j.jnucmat.2025.155813 ↗
24. Beryllium oxide utilized in nuclear reactors: part I: application history, thermal properties, mechanical properties, corrosion behavior and fabrication methods10.1016/j.net.2022.07.017 ↗
25. Utilization of BeO in reactors10.1016/0022-3115(64)90158-8 ↗
26. Dielectric response and breakdown behavior of polymer-ceramic nanocomposites: the effect of nanoparticle distribution10.1016/j.compscitech.2017.03.039 ↗
27. Impact of powder morphology on quality of low-pressure injection moulded reaction-bonded net shape oxide ceramics10.1016/j.jeurceramsoc.2012.10.010 ↗
28. On the effects of powder morphology on the post-comminution ballistic strength of ceramics10.1016/j.ijimpeng.2016.10.008 ↗
29. Li Q, Ma Y, Li A, et al. Effect of the SiC powder microscopic morphology on properties of si/SiC ceramics prepared by spark plasma sintering n.d. https://doi.org/10.1111/ijac.14904.10.1111/ijac.14904 ↗
30. Mechanical properties of sintered ZrB2–SiC ceramics10.1016/j.jeurceramsoc.2010.11.013 ↗
31. A calcination study on BeO ceramics for radiation dosimetry10.1016/j.materresbull.2020.110921 ↗
32. A systematic study on luminescence characterization of lanthanide-doped BeO ceramic dosimeters10.1016/j.jallcom.2021.160105 ↗
33. Effect of sintering temperature on dosimetric properties of BeO ceramic pellets synthesized using precipitation method10.1016/j.nimb.2018.12.036 ↗
34. Influence of synthesis conditions on formation of core–shell titanate–ferrite particles and processing of composite ceramics10.1016/j.ceramint.2014.09.076 ↗
35. Ceramic fused filament fabrication (CF3) of alumina: influence of powder particle morphology on processing and microstructure
36. Cuboidal vs equiaxed: the role of nanopowder assembly during BaTiO3 ceramic pressing step10.1016/j.jmst.2023.11.064 ↗
37. Nano-sized cube-shaped single crystalline oxides and their potentials; composition, assembly and functions10.1016/j.apt.2014.02.006 ↗
38. Preparation and properties of porous BaTiO3 nanostructured ceramics produced from cuboidal nanocrystals10.1016/j.ceramint.2021.03.128 ↗
39. Nanostructured ceramic powders by hydrothermal synthesis and their applications10.1016/S1387-1811(02)00334-7 ↗
40. Influence of MoB2 and ZrB2 ceramic particles on the microstructure, electrical conductivity, and mechanical properties of copper matrix composites10.1016/j.ceramint.2024.12.361 ↗
41. Microstructure, electrical, and tribological properties of copper matrix composites reinforced from dual-scale boride ceramic particles
42. Polysilazane derived micro/nano Si3N4/SiC composites10.1016/S0955-2219(02)00039-0 ↗
43. Impact wear resistance of in-situ TiC particles reinforced Mn18Cr2 steel dual-scale architecture composites10.1016/j.ceramint.2024.04.246 ↗
44. A robust superhydrophobic-superoleophilic PDMS/Al2O3/CM composite ceramic membrane: stability, efficient emulsified oil/water separation, and anti-pollution performance10.1016/j.seppur.2023.124864 ↗
45. Synthesis and sintering of beryllium oxide nanoparticles10.1016/S1002-0071(12)60011-2 ↗
46. Synthesis and sintering of beryllium oxide nanoparticles10.1016/S1002-0071(12)60011-2 ↗
47. Growth of BeO nanograins synthesized by polyacrylamide gel route10.1016/S1005-0302(11)60040-6 ↗
48. Luminescence characteristics of al-and ca-doped BeO obtained via a sol-gel method10.1016/j.jpcs.2019.04.003 ↗
49. Adsorption mechanisms of CO2 on macroporous ion-exchange resin organic amine composite materials by the density functional theory
50. Investigation of adsorption behaviors of paraffin waxes on iron, iron oxide, and iron III oxide pipeline's internal surfaces using adsorption locator model
51. ICTAC kinetics committee recommendations for collecting experimental thermal analysis data for kinetic computations10.1016/j.tca.2014.05.036 ↗
52. 2004 · vol. 1
53. Effects of oxygen vacancies on luminescence characteristics of BeO ceramics10.1016/j.jallcom.2022.168670 ↗
54. Effect of Al2O3 particle size on the mechanical properties of alumina-based ceramics10.1016/j.msea.2006.10.073 ↗
55. Enhanced electromagnetic microwave absorption of SiC nanowire-reinforced PDC-SiC ceramics catalysed by rare earth10.1016/j.ceramint.2022.05.145 ↗
56. Effect of rare-earth additions on the structure and dielectric energy storage properties of BaxSr1-xTiO3-based barium boronaluminosilicate glass-ceramics10.1016/j.jallcom.2016.02.022 ↗
57. Effects of intergrain sliding on crack growth in nanocrystalline materials10.1016/j.ijplas.2010.03.001 ↗
58. Influence of high-energy ball milling on mg-PSZ-reinforced TRIP steel-matrix composites synthesized by FAST/SPS10.1016/j.msea.2019.05.104 ↗
59. Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods10.1016/j.actamat.2016.11.046 ↗
60. Pure-phase BiFeO3 ceramics with enhanced electrical properties prepared by two-step sintering10.1016/j.ceramint.2017.02.063 ↗
61. Pressureless two-step sintering of ultrafine-grained high-entropy zirconate ceramics with excellent mechanical properties10.1016/j.jeurceramsoc.2024.03.056 ↗
62. The influence of sulphur on the processing of zirconia based ceramics10.1016/S0955-2219(02)00053-5 ↗
63. Segregation and aggregation behavior of impurity atoms at grain boundaries of BeO: a first-principles study10.1016/j.jnucmat.2025.155914 ↗
64. Comparison of thermal and chemical purification methods for graphite from spent lithium-ion batteries10.1016/j.seppur.2025.133992 ↗
65. Effect of hydrogen remote plasma annealing on the characteristics of copper film10.1016/S0040-6090(03)00042-7 ↗
66. Thermal degradation kinetic analysis and conversion of aesculus indica to porous carbon10.1016/j.indcrop.2020.112555 ↗
67. Oxidation behaviours of particulate matter emitted by a diesel engine equipped with a NTP device10.1016/j.applthermaleng.2017.03.101 ↗
68. Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components10.1016/j.apenergy.2018.06.126 ↗
69. Performance test and pyrolysis kinetics of water-based acrylic acid-amino resin
70. Thermal decomposition characterization and kinetic parameters estimation for date palm wastes and their blends using TGA10.1016/j.fuel.2022.126600 ↗
71. Thermogravimetric analysis of the co-pyrolysis of paper sludge and municipal solid waste10.1016/j.enconman.2015.06.026 ↗
72. Model free kinetic analysis of biomass/sorbent blends for gasification purposes10.1016/j.rser.2015.07.038 ↗
73. Thermal behaviour of hydrochar derived from hydrothermal carbonization of food waste using leachate as moisture source: kinetic and thermodynamic analysis10.1016/j.biortech.2023.128734 ↗
74. Investigation of thermal behavior of pine sawdust and coal during co-pyrolysis and co-combustion10.1016/j.energy.2021.120895 ↗
75. Kinetic study on pyrolysis of mustard stalk using thermogravimetric analysis