Microstructural engineering of ZIF-8/In2O3 core-shell nanocomposites for superior ppb-level NO2 gas sensing performance
Source abstract
Abstract
The enhanced sensitivity and selectivity of NO 2 gas sensors are crucial for atmospheric environmental monitoring. In this study, a novel NO 2 gas sensor based on small-sized ZIF-8/In 2 O 3 core-shell nanocube has been developed through a simple solvothermal method along with in situ modification. The ZIF-8 coating significantly increased the specific surface area of the In 2 O 3 nanocubes from 60.64 m 2 /g to 140.84 m 2 /g, while also boosting the adsorption of oxygen ions on the surface. Gas-sensing tests revealed that the ZIF-8/In 2 O 3 composites exhibited a response of 56.3 to 1 ppm of NO 2 , with an exceptionally low detection limit of 1 ppb. Notably, the sensor demonstrated outstanding selectivity for NO 2 over other potential interfering gases. The remarkable NO 2 sensing performance of the ZIF-8/In 2 O 3 composites can be attributed to the grain boundary effects in the In 2 O 3 nanocubes (with side lengths of approximately 40–50 nm), as well as the sensitizing and filtering effects of the ZIF-8 layer. This work holds significant promise for the rapid detection of low-concentration NO 2 gases in various applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. UV-activated ultrasensitive and fast reversible ppb NO2 sensing based on ZnO nanorod modified by constructing interfacial electric field with In2O3 nanoparticles10.1016/j.snb.2019.127498 ↗
2. Mesoporous In2O3/ZnO heterogeneous microtubes replicated from waste willow catkins for high response and rapid detection of NO2 gas at low temperature10.1016/j.snb.2023.134880 ↗
3. Enhanced NO2 gas sensing properties of ZnO-PANI composite nanofibers10.1016/j.ceramint.2022.09.103 ↗
4. Synthesis of ZnO nanowires/Au nanoparticles hybrid by a facile one-pot method and their enhanced NO2 sensing properties10.1016/j.jallcom.2019.01.001 ↗
5. Highly sensitive and lower detection-limit NO2 gas sensor based on Rh-doped ZnO nanofibers prepared by electrospinning10.1016/j.apsusc.2022.156213 ↗
6. The influence of different ZnO nanostructures on NO2 sensing performance10.1016/j.snb.2020.129145 ↗
7. NOx sensor constructed from conductive metal-organic framework and graphene for airway inflammation screening10.1021/acssensors.3c00428 ↗
8. Epitaxial growth of Co3O4/In2O3 p-n heterostructure with rich oxygen vacancies for ultrahigh triethylamine sensing10.1016/j.snb.2023.134881 ↗
9. 0D/2D CdS/ZnO composite with n-n heterojunction for efficient detection of trimethylamine10.1016/j.jcis.2021.05.082 ↗
10. MOF-on-MOF nanoarchitecturing of Fe2O3@ZnFe2O4 radial-heterospindles towards multifaceted superiorities for acetone detection10.1016/j.cej.2022.136094 ↗
11. Rational design and tunable synthesis of Co3O4 nanoparticle-incorporating into In2O3 one-dimensional ribbon as effective sensing material for gas detection10.1016/j.snb.2020.127695 ↗
12. Design engineering of MOF-Derived ZnO porous nanofibers functionalized with Pt clusters: significantly improved acetone sensing properties10.1016/j.snb.2023.134941 ↗
13. Template preparation of porous Pt-modified SnO2 microflowers for high-response detection of VOCs10.1016/j.materresbull.2023.112601 ↗
14. Ultrafast response of Pt functionalized Fe2(MoO4)3 nanoflower gas sensors for ultra-low ppm level H2 gas detection10.1016/j.jallcom.2023.172567 ↗
15. Ultra-high sensitive and selective NO2 gas sensing performance of Au/Pd co-functionalized ZnO nanowires by a one-pot hydrothermal method10.1016/j.vacuum.2023.112742 ↗
16. Sensitivity and selectivity Pt loaded SnO2-Co3O4 gas sensor for hydrogen detection10.1016/j.ceramint.2023.09.208 ↗
17. Synergistic effect of Pd and Fe2O3 nanoparticles embedded in porous NiO nanofibers on hydrogen gas detection: fabrication, characterization, and sensing mechanism exploration10.1016/j.snb.2023.133836 ↗
18. Enhanced NH3 sensing performance of polyaniline via a facile morphology modification strategy10.1016/j.snb.2022.132302 ↗
19. Sodium titanate: a proton conduction material for ppb-level NO2 detection with near-zero power consumption10.1016/j.jhazmat.2023.132781 ↗
20. Synthesis and characterization of Zn-based bimetallic microporous MOF composites for effective formaldehyde sensing at room temperature
21. Fabrication of robust and cost-efficient hoffmann-type MOF sensors for room temperature ammonia detection10.1038/s41467-023-42959-z ↗
22. Metal-organic framework based triboelectric nanogenerator for a self-powered methanol sensor with high sensitivity and selectivity10.1021/acsami.3c07966 ↗
23. Impedance-based detection of NO2 using Ni-MOF-74: influence of competitive gas adsorption10.1021/acsami.3c06864 ↗
24. Anti-interference detection of mixed NOX via In2O3-based sensor array combining with neural network model at room temperature10.1016/j.jhazmat.2023.132857 ↗
25. ZIF-8/MWCNT-nanocomposite based-resistive sensor for highly selective detection of acetone in parts-per-billion: potential noninvasive diagnosis of diabetes10.1016/j.snb.2023.134197 ↗
26. The ammonia modified ZIF-8@SnO2 core-shell nanosheets for improved the sensitivity and selectivity of NO210.1016/j.snb.2024.135613 ↗
27. Recent progress in surface and heterointerface engineering of 2D MXenes for gas sensing applications
28. ZnO single nanowire gas sensor: a platform to investigate the sensitization of Pt10.1016/j.cej.2023.145481 ↗
29. High sensitivity and ultra-low detection limit of chlorine gas sensor based on In2O3 nanosheets by a simple template method10.1016/j.snb.2019.127456 ↗
30. Highly sensitive and selective Au-loaded WO3 nanoplates for NO2 gas detection10.1016/j.snb.2025.137900 ↗
31. Highly selective gas sensors for formaldehyde detection based on ZnO@ZIF-8 core-shell heterostructures10.1016/j.snb.2023.134689 ↗
32. Highly responsive and selective NO2 gas sensors based on titanium metal organic framework (Ti-MOF) with pyromellitic acid10.1016/j.sna.2023.114301 ↗
33. Facet controlled polyhedral ZIF-8 MOF nanostructures for excellent NO2 gas-sensing applications10.1016/j.materresbull.2020.111133 ↗
34. Temperature modulated Cu-MOF based gas sensor with dual selectivity to acetone and NO2 at low operating temperatures10.1016/j.snb.2020.129053 ↗
35. Metal-organic-framework-derived In2O3 microcolumnar structures embedded with Pt nanoparticles for NO2 detection near room temperature10.1016/j.ceramint.2019.02.020 ↗
36. NO2 sensing properties of SmFeO3 porous hollow microspheres10.1016/j.snb.2018.03.073 ↗
37. Metal–organic framework-derived Cu2O–CuO octahedrons for sensitive and selective detection of ppb-level NO2 at room temperature10.1016/j.snb.2020.129045 ↗