Cleaner production of porcelain tile powders. Granule and green compact characterization
Source abstract
Abstract
Abstract A new ceramic powder preparation process, the droplet–powder granulation process (DPGP), was recently proposed in pursuit of energy/water conservation and environment protection for sustainable development of the ceramic industry. This study characterizes the DPGP granules and resulting pressed green compacts and compares them with those obtained using traditional spray-drying (hereafter SD) and granulation (hereafter G) processes. Powder and granule properties (granule size distribution, flowability, microstructure, yield pressure, etc.), powder pressing behaviour, and green compact properties (microstructure, bending strength, etc.) were determined. The properties of the DPGP powder and the resulting compacts displayed an intermediate performance between those of the powders and compacts obtained by the SD and G processes, demonstrating the feasibility of the DPGP process in the pre-firing stage of porcelain tile manufacture. The study also shows that, in addition to the key spray-mixing step, the subsequent rolling treatment also plays a major role in DPGP granule formation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Flame retardant materials and properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Fracture properties of spray-dried powder compacts: effect of granule size10.1016/j.jeurceramsoc.2008.05.004 ↗
2. Effect of the green porous texture on porcelain tile properties10.1016/j.jeurceramsoc.2006.07.005 ↗
3. Compaction mechanism as the function of atomized powder particle size10.1016/0272-8842(95)99790-I ↗
4. Effect of spray-dried powder granulometry on the porous microstructure of polished porcelain tile10.1016/j.jeurceramsoc.2009.11.018 ↗
5. Porcelain tile: almost 30 years of steady scientific-technological evolution10.1016/j.ceramint.2009.11.016 ↗
6. IPTS. Reference document on best available techniques in the ceramic manufacturing industry, European Commission (http://eippcb.jrc.es/reference/cer.html) (2007) 116.
7. Effect of ceramic industrial particulate emission control on key components of ambient PM(10)10.1016/j.jenvman.2009.01.016 ↗
8. PM10 speciation and determination of air quality target levels. A case study in a highly industrialized area of Spain10.1016/j.scitotenv.2006.10.023 ↗
9. A novel approach of preparing press-powders for cleaner production of ceramic tiles10.1016/j.jclepro.2010.02.001 ↗
10. The use of bulk density measurements as flowability indicators10.1016/S0032-5910(98)00208-3 ↗
11. Powder flowability and density ratios: the impact of granules packing10.1016/S0009-2509(03)00137-4 ↗
12. Effect of internal lubricants on defects in compacts made from spray-dried powders10.1111/j.1151-2916.2002.tb00054.x ↗
13. Effect of externally applied plasticizer on compaction behavior of spray-dried powders10.1111/j.1151-2916.2002.tb00167.x ↗
14. A die pressing test for the estimation of agglomerate strength10.1111/j.1151-2916.1994.tb05369.x ↗
15. Automated generation and analysis of powder compaction diagrams10.1016/0032-5910(94)02816-8 ↗
16. Influence of slurry parameters on the characteristics of spray-dried granules10.1111/j.1151-2916.1999.tb01990.x ↗
17. Spray-drying ceramic powders10.1111/j.1151-2916.1989.tb06184.x ↗
18. Spray-dried ceramic powders: a quantitative correlation between slurry characteristics and shapes of the granules10.1016/j.ces.2004.04.042 ↗
19. Fracture mechanics of green products10.1016/0955-2219(93)90053-T ↗
20. Fracture toughness of spray-dried powder compacts10.1111/j.1151-2916.2002.tb00273.x ↗
21. Effect of relative humidity on the viscoelastic and mechanical properties of spray-dried powder compacts10.1111/j.1551-2916.2005.00875.x ↗