journal article·2006-01Open access

Processing multi-channel alumina membranes by tape casting latex-based suspensions

Yongheng Zhang, Chengwei Qin, Jon Binner

Ceramics International· Volume 32· Issue 7

Abstract

Abstract Tape casting has been used to produce thin, multi-channel alumina ceramic membranes using aqueous-based suspensions with latex as the binder. Three different kinds of latex binders, vinyl/acrylic, vinyl acetate/acrylic and acrylic/styrene latexes, each plasticized with dibutyl- o -phthalate or glycerol, were evaluated in terms of their slurry rheology and green tape mechanical properties. The results showed that the different binder systems had a substantial effect on the rheology of the system as a function of the dispersant concentration; the acrylic/styrene system proving to be the most useful. As a plasticizer, glycerol was not found to be effective; however, dibutyl- o -phthalate was much more successful, particularly in the acrylic/styrene system where it enabled the strain-to-failure of the green tape to be doubled with only a modest decrease in tensile strength. As expected, both binder content and sintering temperature significantly affected the final porosity and fracture strength of the ceramic membranes; 15 wt.% binder and a sintering temperature of 1500 °C were found to yield a membrane with a porosity of ∼40% and strength of ∼95 MPa. Simple multi-channel substrates could be easily assembled by bonding strips of the green tapes together with the ceramic slurry. Adhesion between the tapes was excellent with no interface being observed and on sintering no warping or deformation occurred.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Electrophoretic Deposition in Materials Science · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Fabrication and microstructure of Al2O3–TiO2 composite membranes with ultrafine pores10.1016/S0272-8842(96)00072-7 ↗
2. Preparation and characterization of high-temperature thermally stable alumina composite membrane10.1111/j.1151-2916.1991.tb07320.x ↗
3. Tape casting: the basic process for meeting the needs of electronics industry
4. Tape casting of flat ceramic membranes
5. Aqueous tape casting of alumina substrates10.1016/0955-2219(93)90098-C ↗
6. Tape casting aqueous alumina suspension containing a latex binder10.1023/A:1014966411644 ↗
7. Tape-casting: relationship between organic constituents and the physical and mechanical properties of tapes10.1016/0955-2219(95)90360-U ↗
8. Tape casting of ferroelectric, dielectric, piezoelectric and ferromagnetic materials10.1016/S0955-2219(03)00552-1 ↗
9. Tape casting of alumina in water with an acrylic latex binder10.1016/S0955-2219(96)00143-4 ↗
10. Aqueous suspensions for tape-casting based on acrylic binders10.1016/S0955-2219(97)00115-5 ↗
11. Processing of barium titanate tapes with different binders for MLCC applications. Part II. Comparison of the properties10.1016/S0955-2219(03)00334-0 ↗
12. The role of slip additives in tape casting technology. Part II. Binders and plasticizers
13. The rheology of organic binder solutions
14. Tape casting of PLZST tapes via aqueous slurries10.1016/S0955-2219(03)00238-3 ↗
15. The fabrication and characterization of low-k cordierite-based glass-ceramics by aqueous tape casting10.1016/S0955-2219(03)00231-0 ↗
16. Cellulose in tape casting formulation
17. Aqueous tape casting of yttria stabilised zirconia using natural product binder10.1016/S0955-2219(03)00388-1 ↗
18. Correlation of conformation of acrylic polymers in aqueous suspensions and properties of alumina green sheets
19. Rheological characterization of water-based slurries for the tape casting process10.1016/S0272-8842(02)00027-5 ↗
20. Properties and uses of synthetic emulsion polymers as binders in advanced ceramic processing
21. Aqueous processing of mullite-containing green sheet10.1111/j.1151-2916.1991.tb06782.x ↗
22. Study of interactions between polyelectrolyte dispersant, alumina and latex binders by rheological characterization10.1016/S0955-2219(98)00163-0 ↗
23. A study on green tapes for LOM with water-based tape casting processing10.1016/S0167-577X(02)00975-8 ↗
24. Effects of addition of polyacrylic ammonium on colloidal processing of α-alumina10.2109/jcersj.100.983 ↗
25. The role of ammonium polyacrylate in dispersing concentrated alumina suspensions10.1016/S0955-2219(00)00012-1 ↗
26. Stability of aqueous α-alumina suspensions with poly(methacrylic acid) polyelectrolyte10.1111/j.1151-2916.1988.tb05855.x ↗
27. Processing of highly concentrated aqueous α-alumina suspensions stabilized with polyelectrolytes10.1111/j.1151-2916.1988.tb05792.x ↗
28. Processing of barium titanate tapes with different binders for MLCC applications. Part I. Optimization using design of experiments10.1016/S0955-2219(03)00333-9 ↗