journal article·2012-12Open access

Utilization of granodiorite in the production of porcelain stoneware tiles

S.M. Naga, F. Bondioli, M.M.S. Wahsh, M. El-Omla

Ceramics International· Volume 38· Issue 8

Abstract

Abstract In the present study, the use of granodiorite, as fluxing agent in a body mix for stoneware ceramic tiles production, was assessed. Four batches were formulated using clay from Khaboba, and natural granodiorite from Saint Katherine, Sinai, Egypt. The batches were tailored to completely replace both feldspatic and inert components of stoneware ceramic tiles. Densification was studied according to ISO rules, while sinterability was estimated by optical dilatometry. The dependence of microstructure and mechanical properties of stoneware ceramic tiles on granodiorite content was discussed. Strength measurements showed that increasing granodiorite content the bending strength of the bodies increased. In particular the studied batches can be used for the production of industrial fast firing tiles. The obtained ceramic tiles possess properties similar to commercial ceramic floor and/or wall tiles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Porcelainized stoneware tiles
2. The reliability of polished porcelain stoneware tiles10.1016/j.jeurceramsoc.2004.05.030 ↗
3. Technical considerations on porcelain tile products and their manufacturing process, Part I
4. Porcelain—raw materials, processing, phase evolution, and mechanical behavior10.1111/j.1151-2916.1998.tb02290.x ↗
5. Microstructural variation in porcelain stoneware as a function of flux system10.1111/j.1151-2916.2004.tb06347.x ↗
6. Examining reaction kinetics in the fast firing of porcelain in dependence from different raw materials
7. Application of feldspar raw materials in the silicate ceramics industry
8. Nepheline syenite-talc low temperature vitrified bodies10.1016/0272-8842(81)90017-1 ↗
9. An alternative mineral in the glass and ceramic industry: Nepheline syenite10.1016/j.mineng.2005.10.015 ↗
10. Dilatomeric study of shrinkage during sintering process for porcelain stoneware body in presence of nepheline syenite10.1016/j.jmatprotec.2008.03.033 ↗
11. Clay–gabbro mixtures
12. Whiteware bodies on gabbro concentrate fraction basis
13. Effect of the degree of crystallinity of flux on tile bodies
14. Possibility of obtaining ceramogranite using quartz-feldspar raw material from Ukraine10.1007/s10717-008-9011-8 ↗
15. I.M. Tereshchenko, G.N. Pun'ko, L.V. Serikova, Optimization of ceramic granite compositions, Glass and Ceramics 57 (11–12) 435–437.10.1023/A:1010989928035 ↗
16. Granite as flux in stoneware tile manufacturing10.1016/j.jeurceramsoc.2011.05.023 ↗
17. China clay–basalt mixtures
18. Assessment of some Egyptians basalt and low – grade clays for ceramic tiles manufacture
19. Ceramic material from basaltic tuffs
20. Characterization of basaltic tuffs and their applications for the production of ceramic and glass–ceramic materials10.1016/j.ceramint.2009.03.026 ↗
21. Use of soda – lime Scrap – glass as a fluxing agent in a porcelain stoneware tile mix10.1016/S0955-2219(03)00121-3 ↗
22. Recycling of screen glass into new traditional ceramics materials10.1111/j.1744-7402.2009.02378.x ↗
23. Ceramics International
24. Porcelain-raw materials, processing, phase evolution, and mechanical behavior10.1111/j.1151-2916.1998.tb02290.x ↗
25. Incorporation of granite cutting sludge in industrial porcelain tile formulations10.1016/j.jeurceramsoc.2003.10.039 ↗
26. Muliite formation in clays and clay—derived vitreous ceramics10.1016/j.jeurceramsoc.2007.03.009 ↗
27. Fired porcelain microstructures revisited10.1111/j.1151-2916.1999.tb02282.x ↗