journal article·2012-07

Tunable TiO2 (anatase and rutile) materials manufactured by mechanical means

Amal K.P.D. Savio, David Starikov, Abdelhak Bensaoula, Rajeev Pillai, Luis L. de la Torre García, Francisco C. Robles Hernández

Ceramics International· Volume 38· Issue 5
Publisher page

Abstract

Abstract Anatase and rutile are two naturally found titanium dioxide phases with attractive dielectric, catalytic, and photo-catalytic characteristics. Anatase and rutile are photo-catalytically active in the UV region, since their band gaps are 3.2 eV and 3.75 eV, respectively. In this work is proposed a cost-effective, easy to launch methodology for modification of the TiO 2 bandgap. Such modifications will make the oxides photo-catalytically active in a wider optical range from the visible wavelengths to an extended UV spectrum. The proposed methodology is based on mechanical means such as mixing and milling. Various ratios of anatase:rutile were investigated and milled from 0 (mixing only) to 50 h using high energy mills. The results on mixing and milling show that it is possible to modify the bandgap of the TiO 2 from 2.53 eV to 4.04 eV. The characterization was conducted by means of X-ray diffraction, Raman spectroscopy, Scanning electron microscopy, and optical spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Anatase-to-rutile transformation in titania powders10.1111/j.1151-2916.2001.tb00709.x ↗
2. Henrich · 1994
3. Characterisation and activity of sol–gel-prepared TiO2 photocatalysts modified with Ca, Sr or Ba ion additives10.1039/b004384m ↗
4. Titanium dioxide – a review
5. Induction of cytotoxicity by photoexcited TiO2 particles
6. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
7. Titanium dioxide photocatalysis: present situation and future approaches10.1016/j.crci.2005.02.055 ↗
8. Dielectric property of (TiO2)(x)–(Ta2O5)(1−x) thin films10.1063/1.120746 ↗
9. Environmental applications of semiconductor photocatalysis10.1021/cr00033a004 ↗
10. Low-temperature synthesis of nanometer-sized crystalline TiO2 particles and their photoinduced decomposition of formic acid10.1006/jcis.1999.6275 ↗
11. Neodymium ion dopant effects on the phase transformation in sol–gel derived titania nanostructures10.1016/j.mseb.2004.04.008 ↗
12. Densification of nanostructured titania assisted by a phase-transformation10.1038/358048a0 ↗
13. The critical size mechanism for the anatase to rutile transformation in TiO2 and doped-TiO210.1016/j.jeurceramsoc.2005.03.246 ↗
14. Phase transformation studies in TiO2 supporting different defect mechanisms in vacuum-reduced+hydrogen-reduced rutile10.1063/1.1713231 ↗
15. Reformulation of an aqueous alumina slip based on modification of particle-size distribution and particle packing10.1111/j.1151-2916.1992.tb08178.x ↗
16. Effects of calcination on the microstructures and photocatalytic properties of nanosized titanium dioxide powders prepared by vapor hydrolysis10.1111/j.1151-2916.1999.tb01802.x ↗
17. Direct formation of zirconia-doped titania with stable anatase-type structure by thermal hydrolysis10.1111/j.1151-2916.2002.tb00274.x ↗
18. Size effects in gas-phase photo-oxidation of trichloroethylene using nanometer-sized TiO2 catalysts10.1006/jcat.2000.2838 ↗
19. Sonochemical synthesis of nanostructured anatase and study of the kinetics among phase transformation and coarsening as a function of heat treatment conditions10.1016/j.jeurceramsoc.2007.10.013 ↗
20. Effect of coarsening of sonochemical synthesized anatase on BET surface characteristics10.1016/j.ces.2010.11.030 ↗
21. P.D.S. Amal Kennedy, Department of Engineering Technology, University of Houston, Houston, TX, 2011, p. 151.
22. Benjamin · Powder Metall. Int. · 1980 · 12 · 43
23. Gilman · Annu. Rev. Mater. Sci. · 1983 · 13 · 27910.1146/annurev.ms.13.080183.001431 ↗
24. Production and characterization of (Al,Fe)–C (graphite or fullerene) composites prepared by mechanical alloying10.1080/10426910008913005 ↗
25. Particle size evolution in non-adhered ductile powders during mechanical alloying10.4028/www.scientific.net/MSF.360-362.317 ↗
26. Nanostructured metal composites reinforced with fullerenes10.1007/s11837-010-0034-6 ↗
27. Cullity · 1978
28. On the analysis of grain size in bulk nanocrystalline materials via X-ray diffraction
29. Quantitative analysis of anatase–rutile mixtures with an X-ray diffractometer10.1021/ac60125a006 ↗
30. Rapid determination of aluminum by UV–vis diffuse reflectance spectroscopy with application of suitable adsorbents10.1016/j.talanta.2006.05.056 ↗
31. Effect of coarsening of sonochemical synthesized anatase on BET surface characteristics10.1016/j.ces.2010.11.030 ↗
32. Size-dependent modifications of the Raman spectrum of rutile TiO210.1063/1.2364123 ↗
33. Temperature effects during Ostwald ripening on structural and bandgap properties of TiO2 nanoparticles prepared by sonochemical synthesis10.1016/j.mseb.2010.06.004 ↗
34. Electrical and optical properties of rutile single crystals10.1103/PhysRev.87.876 ↗
35. Effects of SiO2 addition on TiO2 crystal structure and photocatalytic activity10.1016/j.jeurceramsoc.2010.05.014 ↗