The influence of texture on elastic and thermophysical properties of kaolin- and illite-based ceramic bodies
Source abstract
Abstract
Abstract The influence of technological texture in illite- and kaolin-based ceramic bodies was studied on textured experimental samples. Strong texture was created by spreading (layering) a wet plastic mass. The texture was confirmed by XRD analysis. Anisotropy of Young's modulus (E), thermal diffusivity (a), and relative length changes (e) was studied as a function of firing temperature in the interval 20–1200 °C. Anisotropy was assessed based on the values of E, a, and e in two directions – parallel (axial direction, “||”) and perpendicular (transversal direction, “⊥”) to the basal planes of illite/kaolinite crystals. Up to 500 °C, the ratio E||/E⊥≈2.9 and a||/a⊥≈2.0 for the illite-based samples and E||/E⊥≈6.9 and a||/a⊥≈2.7 for the kaolin samples. Above 800 °C, the anisotropy of E and a decrease, but do not disappear entirely even after the firing at 1200 °C. It was found, that the firing shrinkage is more significant in transversal direction, which is more pronounced in kaolin samples. The results were compared with hand molded and extruded samples, showing a very strong axial texture in extruded samples. Compared to illite, kaolin is more prone to develop a significant technological texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Hygrothermal properties of building materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Elastic moduli of anisotropic clay10.1190/1.2757624 ↗
2. Elastic properties of dry clay mineral aggregates, suspensions and sandstones10.1046/j.1365-246X.2003.02046.x ↗
3. M.B. Clennell, D.N. Dewhurst, K.M. Brown, G.K. Westbrook, Permeability anisotropy of consolidated clays, Geological Society, London, Special Publications, 158, 1999, pp. 79–9610.1144/GSL.SP.1999.158.01.07 ↗
4. Study of the raw materials used in the manufacture of ceramics in Fran Ali (Oued Laou, Marruecos)10.3989/cyv.322012 ↗
5. Mineralogical and textural characterization of Tartessian ceramics from Ategua (Cordóba, Spain)
6. Influence of technological texture on electrical properties of industrial ceramics10.1016/j.jpcs.2007.03.004 ↗
7. Thermal expansion of textured electroceramics
8. The effect of texture on thermal expansion of extruded ceramics
9. The influence of texture on drying ceramic tiles
10. M.Kučeráková, S.Vratislav, L.Kalvoda, Z.Trojanová, Texture analysis of zirconium samples deformed by uniaxial tension using neutron and X-ray diffraction, IOP Conf. Series: Materials Science and Engineering. 82, 2015, p. 012022.10.1088/1757-899X/82/1/012022 ↗
11. Radiodefectoscopy of the ordered inhomogeneous dielectrics
12. Mapping the texture of electroporcelain blank by radiointroscopy
13. Anisotropic mechanical properties of textured quartz porcelain
14. Mechanical properties and thermal expansion of clay ceramics measured on laboratory samples
15. Thermal behavior of the raw materials forming porcelain stoneware mixtures by combined optical and in-situ X-ray dilatometry10.1111/j.1551-2916.2007.01614.x ↗
16. Processing and characterization of textured mullite ceramics from phyllosilicates10.1016/j.jeurceramsoc.2010.04.029 ↗
17. Characterization of textured ceramics containing mullite from phyllosilicates10.1016/j.ceramint.2012.12.038 ↗
18. Evolution of mullite texture on firing tape-cast kaolin bodies10.1111/j.1151-2916.2002.tb00232.x ↗
19. Anisotropy of thermal conductivity and elastic properties of extruded clay-based materials: evolution with thermal treatment10.1016/j.clay.2015.08.006 ↗
20. Development of Young's Modulus of Illitic Clay during heating up to 1100°C
21. Upgrading of TGA/DTA analyzer derivatograph
22. ASTM E1876-09, Standard test method for dynamic Young’s modulus, shear modulus and Poisson’s ratio by impulse excitation of vibration, ASTM International, West Conshohocken, PA, 2009.
23. The apparatus for measurement of Young's modulus of ceramics at elevated temperatures
24. Thermal diffusivity of semitransparent materials determined by the laser-flash method applying a new analytical model10.1023/A:1022611527321 ↗
25. The nature of structure-bonded H2O in illite and leucophyllite from dehydration and dehydroxylation experiments10.1346/CCMN.2007.0550104 ↗
26. Kinetics of illite dehydroxylation10.1007/s00269-006-0092-z ↗
27. V.Hanykýř, J.Kutzendӧrfer, Technology of Ceramics, Silis, Praha, 2008 (in Czech).
28. Chakraborty · 2014
29. Kaolinite-metakaolinite, a model of a solid with extremely high lattice defect concentration
30. Sintering behaviour of clays for the production of ceramics