journal article·2015-04

Preparation of γ-alumina large grain particles with large specific surface area via polyol synthesis

Toshio Itoh, Toshio Uchida, Ichiro Matsubara, Noriya Izu, Woosuck Shin, Hiroshi Miyazaki, Hiromasa Tanjo, Keisen Kanda

Ceramics International· Volume 41· Issue 3
Publisher page

Abstract

We developed the polyol synthesis of γ-alumina particles that allows for control of their particle size from the nanometer level to the micrometer level. The developed polyol synthesis utilized a reflux reaction of ethylene glycol solution with aluminum nitrate hexahydrate and poly(vinylpyrrolidone) (PVP). Two important process parameters – the molecular weight of PVP and refluxing temperature – were investigated to control the size of the alumina particles. Further, two growth models for amorphous alumina particles in polyol synthesis were suggested. γ-Alumina with secondary particle size ranging from 142 nm to 1.0 μm with a specific surface area ranging from 81 to 32 m2/g was obtained. The α-alumina prepared by high-temperature annealing of over 1200 °C had secondary particle sizes ranging from 246 to 330 nm, but with specific surface areas of only 5.4–11 m2/g. Therefore, it is proved that the polyol synthesis is able to control secondary particle size of γ-alumina upon maintaining a large specific surface area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Tailoring silica–alumina-supported Pt–Pd as poison-tolerant catalyst for aromatics hydrogenation10.1016/j.jcat.2013.04.009 ↗
2. Mesostructured γ-Al2O3 with a Lathlike framework morphology10.1021/ja0208299 ↗
3. Preparation of Ru nanoparticles supported on γ-Al2O3 and its novel catalytic activity for ammonia synthesis10.1006/jcat.2001.3418 ↗
4. Hydrodechlorination of CCl2F2 (CFC-12) over γ-alumina supported palladium catalysts10.1016/S0926-860X(97)00265-2 ↗
5. Kinetics of the deep oxidation of benzene, toluene, n-hexane and their binary mixtures over a platinum on γ-alumina catalyst10.1016/S0926-3373(02)00036-X ↗
6. On the relation between particle morphology, structure of the metal–support interface, and catalytic properties of Pt/γ-Al2O310.1006/jcat.1996.0330 ↗
7. Mo/γ-Al2O3 catalysts for the oxidative dehydrogenation of propane: effect of Mo loading10.1016/S0926-860X(00)00680-3 ↗
8. Catalytic dehydrogenation of cyclohexene over MoO3/γ-Al2O3 catalysts10.1007/s11243-011-9461-7 ↗
9. Effects of Ce/Zr ratio on the reducibility, adsorption and catalytic activity of CuO/CexZr1−xO2/γ-Al2O3 catalysts for NO reduction by CO10.1016/j.apcatb.2010.02.032 ↗
10. Pd/γ-Al2O3 monolithic catalysts for NOx reduction with CH4 in excess of O2: effect of precursor salt10.1016/j.cej.2008.11.050 ↗
11. Slurry-phase Fischer–Tropsch synthesis using Co/γ-Al2O3, Co/SiO2 and Co/TiO2: effect of support on catalyst aggregation10.1007/s10562-009-0021-0 ↗
12. Electrical properties of Ni/silica gel and Pt/γ-alumina catalysts in relation to metal content in the frequency domain10.1016/j.matchemphys.2008.08.058 ↗
13. In situ DRIFTS study of the effect of structure (CeO2–La2O3) and surface (Na) modifiers on the catalytic and surface behaviour of Pt/γ-Al2O3 catalyst under simulated exhaust10.1016/j.apcatb.2008.06.004 ↗
14. Aggregation and settling in aqueous polydisperse alumina nanoparticle suspensions10.1007/s11051-012-0851-3 ↗
15. Combustion chemical vapour deposition of Al2O3 films: effect of temperature on structure, morphology and adhesion10.1016/j.surfcoat.2010.08.026 ↗
16. Aluminum local environment and defects in the crystalline structure of sol–gel alumina, catalyst10.1021/jp983130r ↗
17. Economical synthesis of nano alumina powder using an aqueous sol–gel method10.1016/j.matlet.2008.03.012 ↗
18. Structure characterisation and mechanical properties of crystalline alumina coatings on stainless steel fabricated via sol–gel technology and fibre laser processing10.1016/j.jeurceramsoc.2012.07.012 ↗
19. Synthesis of mesoporous c-alumina by sol–gel process and its characterization and application for sorption of Pu(IV)10.1007/s10971-011-2613-6 ↗
20. Sol–gel synthesis of transparent alumina gel and pure gamma alumina by urea hydrolysis of aluminum nitrate10.1023/B:JSST.0000039497.46154.8f ↗
21. Synthesis of γ-alumina via precipitation in ethanol10.1016/j.matlet.2008.03.048 ↗
22. Evaluation of dispersability of gamma alumina prepared by homogeneous precipitation10.2109/jcersj2.120.290 ↗
23. Synthesis and characterization of nano-sized porous gamma-alumina by control precipitation method10.1016/j.matchemphys.2008.07.076 ↗
24. Free-flowing, transparent g-alumina nanoparticles synthesized by a supersonic thermal plasma expansion process10.1016/j.cap.2011.12.001 ↗
25. Optically transparent polycrystalline Al2O3 produced by spark plasma sintering10.1111/j.1551-2916.2007.02086.x ↗
26. Free-flowing, transparent g-alumina nanoparticles synthesized by a supersonic thermal plasma expansion process10.1111/j.1551-2916.2009.03544.x ↗
27. Nanostructured alumina from freeze–dried precursors10.1111/j.1551-2916.2010.04021.x ↗
28. Microwave plasma synthesis of nanostructured γ-Al2O3 powders10.1111/j.1151-2916.2003.tb03532.x ↗
29. On the polyol synthesis of silver nanostructures: glycolaldehyde as a reducing agent10.1021/nl800910d ↗
30. Controlled synthesis of monodispersed cerium oxide nanoparticle sols applicable to preparing ordered self-assemblies10.1246/bcsj.81.761 ↗
31. X-ray line broadening in metals10.1088/0370-1298/62/11/110 ↗