journal article·2009-07Open access

Effect of washing of barium titanate powders synthesized by hydrothermal method on their sinterability and piezoelectric properties

Kongjun Zhu, Jinhao Qiu, Koji Kajiyoshi, Masayuki Takai, Kazumichi Yanagisawa

Ceramics International· Volume 35· Issue 5

Abstract

Abstract BaTiO3 (BT) powders were synthesized by the hydrothermal method for fabricating lead-free barium titanate piezoelectric ceramics. The obtained powders were washed by distilled water and 0.01N acetic acid solutions separately, and utilized to obtain piezoelectric ceramics by traditional sintering. BT ceramics with the highest piezoelectric properties (d33 value is over 190 pC/N) was obtained from the BT powder synthesized at 250 °C and washed by acetic acid solution. The influence of washing method and sintering temperature on the piezoelectric properties of BT ceramics were studied. The reasons were investigated by comparing the properties of BT powders and their compacts sintered at different temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Ferroelectric properties of the PbZrO3–PbTiO3 system10.1143/JJAP.35.5104 ↗
2. Lead-free piezoceramics10.1038/nature03028 ↗
3. Influence of different templates on the textured Bi0.5(Na1−xKx)0.5TiO3 piezoelectric ceramics by the reactive templated grain growth process10.1016/j.ceramint.2003.12.047 ↗
4. Some effects of different additives on dielectric and piezoelectric properties of (Bi1/2Na1/2)TiO3–BaTiO3 morphotropic-phase-boundary composition10.1016/j.matlet.2003.08.034 ↗
5. Sintering and piezoelectric properties of potassium sodium niobate ceramics with newly developed sintering aid10.1143/JJAP.44.258 ↗
6. Ferroelectric and piezoelectric properties of fine-grained Na0.5K0.5NbO3 lead-free piezoelectric ceramics prepared by spark plasma sintering10.1111/j.1551-2916.2005.00743.x ↗
7. Compositional dependence of piezoelectric properties in NaxK1−xNbO3 lead-free ceramics prepared by spark plasma sintering10.1111/j.1551-2916.2006.00960.x ↗
8. Lead-free barium titanate ceramics with large piezoelectric constant fabricated by microwave sintering10.1143/JJAP.45.L30 ↗
9. Fabrication of a lead-free BNT piezoelectric material using a hybrid sintering process10.3233/JAE-2005-682 ↗
10. Hydrothermal synthesis of advanced ceramic powder
11. Preparation of barium titanate ultrafine particles from rutile titania by a hydrothermal conversion10.1016/j.powtec.2004.03.002 ↗
12. Hydrothermal growth of BaTiO3 on TiO2 single crystals10.1016/S0039-6028(02)01959-3 ↗
13. BaTiO3 particles prepared by microwave-assisted hydrothermal reaction using titanium acylate precursors10.1016/S0167-577X(99)00117-2 ↗
14. Evidence of a dissolution-precipitation mechanism in hydrothermal synthesis of barium titanate powders10.1016/S0955-2219(98)00356-2 ↗
15. Hydrothermal synthesis of high-purity BaTiO3 powders: control of powder phase and size, sintering density, and dielectric properties10.1016/j.matlet.2003.10.030 ↗
16. Formation mechanisms and morphological changes during the hydrothermal synthesis of BaTiO3 particles from a chemically modified, amorphous titanium (hydrous) oxide precursor10.1016/S0955-2219(03)00016-5 ↗
17. Synthesis of high tetragonality nanoparticle BaTiO310.1016/j.mee.2005.10.058 ↗
18. K. Kajiyoshi, M. Takai, A. Onda, K. Yanagisawa, Presented at the 42nd Symposium on Basic Science of Ceramics, Nagaoka-shi, Japan, 2004.