journal article·2013-09

The influence of particle in-flight properties on the microstructure of coatings deposited by the supersonic atmospheric plasma spraying

Y. Bai, K. Liu, Z.H. Wen, J.J. Tang, L. Zhao, Z.H. Han

Ceramics International· Volume 39· Issue 7
Publisher page

Abstract

Abstract In this work, yttria-stabilised zirconia (YSZ) coatings were deposited by a high-efficiency supersonic atmospheric plasma spraying (SAPS) system. During spraying, the in-flight properties (including velocity and surface temperature) of the sprayed particles were diagnosed on-line by a commercially available Spray Watch 2i system positioned normal to the spraying axis. The effect of the in-flight properties of the sprayed particles on the microstructure of the coatings was studied, with the aim of achieving improved knowledge on the accurate control of their coating quality. The VT value, defined as a function of the in-flight velocity of the particles and the surface temperature of the substrate, was observed to be directly proportional to the reciprocal of the porosity and structure uniformity of the coatings, which indicated that the structure of the SAPS-coatings can be tailored by adjusting the VT value of the sprayed particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
2. Microstructure, mechanical properties and thermal shock resistance of plasma sprayed nanostructured zirconia coatings10.1016/j.ceramint.2011.04.024 ↗
3. Influence of the velocity of plasma-sprayed particles on splat formation10.1007/BF02645868 ↗
4. Numerical simulation of impingement of molten Ti, Ni, and W droplets on a flat substrate10.1007/BF02645867 ↗
5. Modeling of particles impacting on a rigid substrate under plasma spraying conditions10.1007/BF02648527 ↗
6. Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate
7. Influence of particle parameters at impact on splat formation and solidification in plasma spraying processes10.1007/BF02648528 ↗
8. Dynamics of splat formation in plasma spray coating process10.1023/A:1012940515065 ↗
9. Influence of velocity and surface temperature of alumina particles on the properties of plasma sprayed coatings10.1007/BF00566524 ↗
10. Influence of particle in-flight characteristics on the microstructure of atmospheric plasma sprayed yttria stabilized ZrO210.1016/S0257-8972(01)01239-7 ↗
11. Investigation of particle in-flight characteristics during atmospheric plasma spraying of yttria stabilized ZrO2: Part 2. Modeling10.1361/105996301770349448 ↗
12. Role of in-flight temperature and velocity of powder particles on plasma sprayed hydroxyapatite coating characteristics10.1016/j.surfcoat.2011.09.058 ↗
13. A comparison of thermal shock behavior between currently plasma spray and supersonic plasma spray CeO2–Y2O3–ZrO2 graded thermal barrier coatings10.1016/j.surfcoat.2006.07.176 ↗
14. Effect of spraying power on the microstructure and mechanical properties of supersonic plasma-sprayed Ni-based alloy coatings10.1016/j.apsusc.2008.03.148 ↗
15. Porosity, mechanical properties, residual stresses of supersonic plasma-sprayed Ni-based alloy coatings prepared at different powder feed rates10.1016/j.apsusc.2007.12.023 ↗
16. Structure–property differences between supersonic and conventional atmospheric plasma sprayed zirconia thermal barrier coatings10.1016/j.surfcoat.2011.01.056 ↗
17. Air plasma sprayed thermal barrier coatings on titanium alloy substrates10.1016/j.surfcoat.2007.02.010 ↗
18. Nanoindentation study of microplasma sprayed hydroxyapatite coating10.1016/j.ceramint.2009.01.002 ↗
19. Melting and oxidation behavior of in-flight particles in plasma spray process10.1016/j.ijheatmasstransfer.2005.07.019 ↗
20. Particle characterization and splat formation of plasma sprayed zirconia10.1361/105996306X92668 ↗
21. Predicting splat morphology in a thermal spray process10.1016/j.surfcoat.2007.03.010 ↗