Sintering of Al2O3–SiC composite from sol–gel method with MgO, TiO2 and Y2O3 addition
Source abstract
Abstract
Abstract Al 2 O 3 –SiC composite ceramics were prepared by pressureless sintering with and without the addition of MgO, TiO 2 and Y 2 O 3 as sintering aids. The effects of these compositional variables on final density and hardness were investigated. In the present article at first α-Al 2 O 3 and β-SiC nano powders have been synthesized by sol–gel method separately by using AlCl 3 , TEOS and saccharose as precursors. Pressureless sintering was carried out in nitrogen atmosphere at 1600 °C and 1630 °C. The addition of 5 vol.% SiC to Al 2 O 3 hindered densification. In contrast, the addition of nano MgO and nano TiO 2 to Al 2 O 3 –5 vol.% SiC composites improved densification but Y 2 O 3 did not have positive effect on sintering. Maximum density (97%) was achieved at 1630 °C. Vickers hardness was 17.7 GPa after sintering at 1630 °C. SEM revealed that the SiC particles were well distributed throughout the composite microstructures. The precursors and the resultant powders were characterized by XRD, STA and SEM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia–alumina composites10.1016/j.jeurceramsoc.2004.09.025 ↗
2. Relationship between wear rate, surface pullout and microstructure during abrasive wear of alumina and alumina/SiC nanocomposites10.1016/j.actamat.2005.03.031 ↗
3. Influence of the SiC grain size on the wear behavior of Al2O3/SiC composites10.1016/j.jeurceramsoc.2005.01.049 ↗
4. Evidence for bulk residual stress strengthening in Al2O3/SiC nanocomposites10.1111/j.1151-2916.2002.tb00400.x ↗
5. Intragranular particle residual stress strengthening of Al2O3–SiC nanocomposites10.1111/j.1551-2916.2005.00309.x ↗
6. Wear and friction behavior of alumina/mullite composite by sol–gel infiltration technique10.1016/j.matdes.2004.07.012 ↗
7. The effect of starting precursors on the carbothermal synthesis of SiC powders10.1016/S0272-8842(02)00091-3 ↗
8. New design concept of structural ceramics–ceramic nanocomposites10.2109/jcersj.99.974 ↗
9. Tensile creep behavior of alumina/silicon carbide nanocomposite10.1111/j.1151-2916.1994.tb04580.x ↗
10. Influence of processing on the microstructural development and flexure strength of Al2O3/SiC nanocomposites10.1016/S0955-2219(96)00188-4 ↗
11. Revisiting the mechanical behavior of alumina/silicon carbide nanocomposites10.1016/S1359-6454(98)00193-1 ↗
12. Microstructural requirements for alumina–SiC nanocomposites10.1179/096797899680471 ↗
13. Microstructure and properties of alumina–SiC nanocomposites prepared from ultrafine powders10.1023/A:1016577728915 ↗
14. Tensile creep of alumina/silicon carbide nanocomposite10.1111/j.1151-2916.1997.tb03111.x ↗
15. Processing and properties of Al2O3/SiC nanocomposites10.1111/j.1365-2818.1995.tb03561.x ↗
16. Review: structural ceramic nanocomposites10.1016/S0955-2219(96)00222-1 ↗
17. Stress state and fracture behavior of alumina–mullite intragranular particulate composites10.1016/j.compscitech.2008.08.012 ↗
18. Microstructure and mechanical properties of pressureless sintered Al2O3/SiC nanocomposites10.1016/S0965-9773(97)00051-2 ↗
19. Effects of additives on microstructure and properties of alumina–silicon carbide nanocomposites10.1111/j.1151-2916.1999.tb02286.x ↗
20. Nanoscale deformation measurement by using the hybrid method of gray-level and holographic interferometry10.1007/BF00363430 ↗
21. An alumina–YAG nanostructured fiber prepared from an aqueous sol–gel precursor: preparation, rheological behavior and spinnability10.1016/j.matlet.2008.03.012 ↗
22. An alumina mat with a nano microstructure prepared by centrifugal spinning method10.1016/j.jnoncrysol.2006.02.068 ↗
23. Kinetics of carbothermal reduction synthesis of beta silicon car-bide10.1002/aic.690390311 ↗
24. Formation of double-side teethed nanocombs of ZnO and self-catalysis of Zn-terminated polar surface10.1111/j.1151-2916.1997.tb02975.x ↗
25. Sintering crystalline solids. II. Experimental test of diffusion models in powder compacts10.1063/1.1736108 ↗
26. Critical concentration of MgO for the prevention of abnormal grain growth in alumina10.1111/j.1151-2916.1994.tb04634.x ↗
27. Mechanism for the role of magnesia in the sintering of alumina containing small amounts of a liquid phase10.1111/j.1151-2916.1989.tb09715.x ↗
28. Phase equilibria and crystal chemistry in the Y2O3–Al2O3–SiO2 system10.1557/JMR.1999.0064 ↗
29. Effect of Y2O3 addition on the properties of reaction-bonded porous SiC ceramics10.1016/j.ceramint.2005.03.024 ↗
30. Effect of oxide dopants on densification, microstructure and mechanical properties of alumina–silicon carbide nanocomposite ceramics prepared by pressureless sintering10.1016/j.jeurceramsoc.2003.10.024 ↗
31. Effects of yttrium on the sintering and microstructure of alumina–silicon carbide “nanocomposites”10.1111/j.1551-2916.2005.00443.x ↗
32. Abnormal grain growth in alumina: synergistic effects of yttria and silica10.1111/j.1151-2916.2003.tb03354.x ↗