Characteristics of Ba(Zr0.1Ce0.7Y0.2)O3-δ nano-powders synthesized by different wet-chemical methods for solid oxide fuel cells
Source abstract
Abstract
Abstract Ba(Zr0.1Ce0.7Y0.2)O3-δ nano-particles were prepared by different wet-chemical synthesis, Pechini (BZCY(P)) and co-precipitation (BZCY(C)), respectively. The BZCY(C) powders have a particle size in range of about 50–150 nm, which is smaller than the BZCY(P) powders with about 500–900 nm. Both the BZCY materials show perovskite structures, but there are impurities in the BZCY (P). Moreover, the electrolyte density was higher in the BZCY (C) than the BZCY (P). The single cells with BZCY (C) electrolytes exhibited about 0.23 W cm−2 at 600 °C and about 0.31 W cm−2 at the same temperature were obtained when the anode-functional layer was introduced between the anode and electrolyte. Thus, the BZCY prepared by carbonate-derived co-precipitation method can be more favorable for high-purity and dense electrolytes in the solid oxide fuel cells than the BZCY prepared by Pechini method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Ceramic fuel cells10.1111/j.1151-2916.1993.tb03645.x ↗
2. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
3. A direct-methane fuel cell with a ceria-based anode10.1038/23220 ↗
4. Material science and engineering: the enabling technology for the commercialisation of fuel cell systems10.1023/A:1004853019349 ↗
5. Materials for fuel-cell technologies10.1038/35104620 ↗
6. Defect chemistry of yttrium-doped barium zirconate: a thermodynamic analysis of water uptake10.1021/cm800843s ↗
7. Protonic conduction in Zr-substituted BaCeO 310.1016/S0167-2738(00)00777-3 ↗
8. Cathode for low‐temperature SOFCs based on oxide proton conductors10.1002/adma.200702762 ↗
9. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0. 1Ce0. 7Y0. 2–xYbxO3–δ10.1126/science.1174811 ↗
10. High performance proton-conducting solid oxide fuel cells with a stable Sm 0.5 Sr 0.5 Co 3− δ–Ce 0.8 Sm 0.2 O 2− δ composite cathode10.1016/j.jpowsour.2009.11.100 ↗
11. Proton conducting ceramics and their applications10.1016/0167-2738(96)00087-2 ↗
12. Solid-state protonic conductors: principles, properties, progress and prospects10.1016/S0167-2738(99)00152-6 ↗
13. Multicomponent proton conducting ceramics of SiO2–TiO2–ZrO2–P2O5–Bi2O3 for an intermediate temperature fuel cell10.1115/1.4002313 ↗
14. Chemical stability and proton conductivity of doped BaCeO 3–BaZrO 3 solid solutions10.1016/S0167-2738(99)00196-4 ↗
15. Technological challenges in the application of proton conducting ceramic10.1016/0167-2738(95)00051-7 ↗
16. Ba (Zr0. 1Ce0. 7Y0. 2) O3–δ as an electrolyte for low‐temperature solid‐oxide fuel cells10.1002/adma.200601366 ↗
17. Synthesis and hydrogen permeation of Ni–Ba (Zr 0.1 Ce 0.7 Y 0.2) O 3− δ metal–ceramic asymmetric membranes10.1016/j.ijhydene.2011.02.029 ↗
18. High-performance anode-supported Solid Oxide Fuel Cells based on Ba (Zr 0.1 Ce 0.7 Y 0.2) O 3−δ (BZCY) fabricated by a modified co-pressing process10.1016/j.jpowsour.2009.10.018 ↗
19. Carbonate Co-precipitation of Gd 2 O 3-doped CeO 2 solid solution nano-particles10.1016/j.msea.2004.05.071 ↗
20. Nano-composite materials for high-performance and durability of solid oxide fuel cells10.1016/j.jpowsour.2006.09.015 ↗
21. A mixed proton, oxygen ion, and electron conducting cathode for SOFCs based on oxide proton conductors10.1016/j.jpowsour.2009.07.057 ↗
22. Tailoring the chemical stability of Ba(Ce0.8−xZrx)Y0.2O3−δ protonic conductors for intermediate temperature solid oxide fuel cells (IT-SOFCs)10.1016/j.ssi.2008.04.002 ↗
23. Inhibition of the formation of barium carbonate by fast heating in the synthesis of BaTiO3 powders via an EDTA gel method10.1016/S0254-0584(01)00410-2 ↗
24. On mechanism of nickel diffusion during metal induced lateral crystallization of amorphous silicon10.1557/PROC-715-A22.11 ↗
25. Diffusion of nickel in single-and polycrystalline Cr2O310.1080/14786430701848046 ↗
26. A novel way to improve performance of proton-conducting solid-oxide fuel cells through enhanced chemical interaction of anode components10.1016/j.ijhydene.2010.10.081 ↗
27. Zirconium doping effect on the performance of proton-conducting BaZryCe0.8−yY0.2O3−δ (0.0 ≤ y ≤ 0.8) for fuel cell applications10.1016/j.jpowsour.2009.03.044 ↗
28. M. Ba(Zr0.1Ce0.7Y0.2)O3–δ as an electrolyte for low-temperature solid-oxide fuel cells10.1002/adma.200601366 ↗
29. Characterization and evaluation of BaCo0.7Fe0.2Nb0.1O3−δ as a cathode for proton-conducting solid oxide fuel cells10.1016/j.ijhydene.2011.09.010 ↗